Hierarchies of extraction and the fields in the logical layer

Similar Questions

• I have the move tool and the selected layer...

  but for some reason, I can't text to line up anywhere. The alignment buttons act as if they are grayed out. Is there something that I am missing?

  There are at least two selected layers (the text layer and the background layer) or the text layer and a selection (i.e. Select all...) for alignment controls and buttons to activate and go down the text of the document.

• I have download important problems, extraction and the implementation of the evaluation version of Acrobat 11.  I am very frustrated and annoyed about this, because I need this immediately.

  Someone help me please get this done.  I desperately need to get there.  Had a single file to come in error and the installation was blocked in the 'extraction' for more than two hours.  I realize the note said essentially Meanwhile please be patient, it will take some time.  I was working on this and my Mac Book Pro fully occupied with this total without the slightest trace of success more than 3 hours.  This is ridiculous.   Someone, somewhere please help.

  Send me an email to [email protected]

  You can try an alternative that does not involve the Download Manager.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  XI Pro/Standard of Adobe Acrobat and Reader: direct download links | ProDesignTools

• automatic locking on and the first layer

  When I go to crop or move an image close to the edge of the canvas, he climbs aboard. I can't not especially with the cropping of the space between the image and the edge of the canvas as I want. Can anyone help to extinguish this jumping on board problem I have?

  Also, I used CS4 a fair bit and haven't come across this same problem but PE when I change things like the text on an adjustment layer and I'm changing options with access keys to resize the text example box, elements seems to skip the background layer a lot and then I have to click back on the layer I want to change between the evolution of the tools. Is this something to do with the Esc key?

  Any help would be greatly appreciated thanks!

  chrisge87 wrote:

  When I go to crop or move an image close to the edge of the canvas, he climbs aboard. I can't not especially with the cropping of the space between the image and the edge of the canvas as I want. Can anyone help to extinguish this jumping on board problem I have?

  Hold down your CTRL key when using the move tool or the crop tool, and you can just move and crop without the automatic jump to the edge.

  chrisge87 wrote:

  Elements seems to skip the background layer a lot and then I have to click back on the layer I want to change between the evolution of the tools.

  In the Options bar to the move tool, uncheck the option "Auto select layer".

  Ken

• How to set a path of exploration in the business model and the mapping layer

  Hello
  
  My table contains a hierarchy vertical, as shown below
  
  ID names Parent_Id
  --- --------- ---------
  1 India - 1
  Gujarat 2 1
  Ahmedabad 3 2
  USA 4-1
  5 Texas 4
  Dallas 5 6
  California 7 4
  Los Angeles 7 8
  
  In top structure
  USA has no parent so his Parent_Id is - 1.
  In Texas and California is a State of the USA so its Parent_Id is 4.
  Dallas is a city in Texas, its Parent is 5 and Los Angeles is the city of California so his Parent_Id is 7.
  
  My path of drilling must be USA-> Texas-> Dallas
  -> California-> Los Angeles.
  
  How can I do this without changing the structure of the table.

  Hello

  You can create a view in the physical layer and can create different columns, corresponding to the country, State and city, and can use them in a hierarchy. You can create the query in the following way

  Select b.SID as Country, b.name as state, c.name as city, c.id of
  (select name, id and parent_id where parent_id =-1 dummy).
  (select name, model id and parent_id) b.
  (select name, model id and parent_id) c
  where a.id = b.parent_id
  and c.PARENT_ID = b.id

  You can use C.id as a key to join with other tables. After that, you can migrate this table to MDB and create a hierarchy on this basis.

  Hope this helps

  Thank you
  Sandeep

• Anyone can throw some light on dependencies on the view and the model layer?

  Hello...
  
  
  My view controller layer has mapped to the layer of dependency model.
  
  It will lead to a cyclic dependency so i map viewcontroller to the model dependencies?

  It depends on where you call the method. If you call it directly from the workflow that you can right click on the method, select 'Edit link' and you get a dialog box where you see the binding of the method. In the lower part, you see the input parameters to your methos. You set the setting on "#{securityCcontext.UserName}".
  If you call the method from within a bean via an operation binding you use code like

          OperationBinding binding = bindingContainer.getOperationBinding("doSomething");
          binding.getParamsMap().put("param1", "hello");
          binding.execute();
  

  Don't forget to check for errors after calling the method.

  Timo

• AppleScript to delete the page and the selected layer

  Hello

  This is part of a larger script, but this is where I'm having the problem. If all goes well, very easy to solve, but makes me crazy.

  I want to delete a text box on the current page only, and only a single layer.

  I can operate on a single layer, but all pages. And on a single page, but all the layers.

  Could someone please help me to write the line to select the active page and layer "slug".

  Thank you

  Matt

  say application "Adobe InDesign CS5.

  Activate

  set myDocument for the active document

  set myActivePage to the page active of the window active

  the value myLayer to layer "Slug" of myDocument

  myLayer say

  say myActivePage

         Ungroup groups

  delete ( each block of text that contains "" remove me ")

  end say

  end say

  end say

  You want something like:

  delete (each block of text that contains "" remove me "and point layer is myLayer)

• Textoverset and the missing links and fonts

  Hello

  OBS: this is for the use of InDesign CS3

  I have this script that checks the overset text:

  if (app.documents.length != 0){ 
   
     var myFrames = app.activeDocument.textFrames; 
   
     var thePageNames = new Array(); 
   
     for (var j = 0 ; j <= (myFrames.length - 1); j++) { 
   
       if(myFrames[j].overflows == true){ 
   
         try {
   
           thePageName = myFrames[j].parent.documentOffset;
   
         } catch (e) { 
   
           continue; // must be on Pasteboard so ignore
   
         }
   
         thePageNames[thePageName] = 1 
   
       } 
   
     } 
   
     if (thePageNames.length == 0) { 
   
       alert("No oversets found on pages."); 
   
     } else{ 
   
       var s = ""; 
   
       for (i in thePageNames) {  
   
         s = s + app.documents[0].pages[Number(i) - 1].name + ", "; 
   
       } 
   
       s = s.substring(0,s.length - 2); 
   
       alert("Check for oversets on page(s): " + "\n" + s); 
   
     }
   
   } else { 
   
     alert("No documents are open."); 
   
   }
  

  
  I need to adapt to this script:

  
  

  var doc = app.activeDocument; 
  var _PDFExportPreset = app.pdfExportPresets.item('MyPDFSetting');
  if (_PDFExportPreset == null){  
     alert('Preset is missing');  
     exit();  
  }  
  var _DocName = doc.name.replace(/\.indd/, "");  
  var _EndNumber = parseInt(_DocName.match(/\d{3}$/),10); /* extract end number */  
  /* test if is a number */  
  if (isNaN(_EndNumber)){  
      alert('End document name is not a number');  
      exit();  
  }  
    
  for(i = 0; i < doc.pages.length; i++){  
      _PageName = doc.pages.item(i).name;  
      app.pdfExportPreferences.pageRange = _PageName;  
      _NewNumber = _EndNumber + i; /* incresase number */  
      _NewNumber = ("00"+_NewNumber).slice(-3); /* padding */  
      _DocName = _DocName.replace(/\d{3}$/,_NewNumber); /* replace number in doc name */  
      _PDFfile = new File('\\\\Testserver\\Test\\'.concat(_DocName,'.pdf'));  
      doc.exportFile(ExportFormat.pdfType, _PDFfile, false, _PDFExportPreset);  
  }
  
  //If the active document has been changed since it was last saved, save it.
  if(app.activeDocument.modified == true){
   app.activeDocument.save();
  }
  //Closes the active document.
  app.activeDocument.close()
  ;
  

  So if there is NO excess of text I need the script to continue the race and that he there IS in excess of text inside the structure of the document and the active layer I need to alert and stop. It's possilble that I would also like this, it is possible for the user to ignore the overset text and continue to make the script run.

  AND I would also check the missing or outdated links AND missing fonts in princip as well as overset text.

  Hi runew73276507,

  Modify the code as shown below,

  If (app.documents.length! = 0) {}

  var myFrames = app.activeDocument.textFrames;

  var thePageNames = new Array();

  for (var j = 0; j)<= (myframes.length="" -="" 1);="" j++)="">

  If (myFrames [j] .overflows == true) {}

  try {}

  thePageName =. parent.documentOffset myFrames [j];

  } catch (e) {}

  continue; should be on the editing table so ignore

  }

  thePageNames [thePageName] = 1

  }

  }

  If (thePageNames.length == 0) {}

  Alert ("no oversets found on the pages.");

  } else {}

  var s = "";

  for {(i in thePageNames)

  s = s + app.documents [0] .pages [Number (i) - 1] .name + ",";

  }

  s = s.substring (0, s.length - 2);

  If (! confirm ("check the oversets on the page (s):" + "\n" + s + "\nDo you want to continue...)) »))

  Exit();

  }

  } else {}

  Alert ("no documents are open.");

  Exit();

  }

  then write your code here...

• Creation of the logic group - no limitation for the value of criteria field?

  I am trying to create simple logical groups in FDM (11.1.1.3 and 11.1.2.1 version). However, an error message is displayed in the information bar.
  
  : Error adding the new record.
  Detail: data access error.
  
  I clicked on the button "Add" and created a logical group that contains * 1 520 * accounts not sequential sources in the field of value of criteria (with operator).
  I separated these accounts from source with a comma and no space between them. (Note: operator = x, value/Exp = 1, Seq = 0) I've updated the grid. Then the error message was displayed and the logical group create failed.
  
  And then, I created a new group of logic that contains only * 100 * accounts not sequential sources in the field of value of criteria (with operator).
  I also separated a comma, no spaces and the same setting. I've updated the grid. And the logical group has been successfully added.
  
  The account of each source contains 10 characters (alphabet and number).
  
  I want to ask:
  1. is there a limitation by specifying accounts sources (i.e.. more than number of accounts for each group of logic source) in the criteria value field when creating simple logical group?
  
  2. I'm adding these logical groups by clicking on the button 'Add' one by one, is it faster way to do (i.e. transfer an excel or csv source file specified accounts)?
  
  Thank you very much!

  You perform the update the named range in the Excel file as the previous poster said? When you import an Excel file using the import XLS function, only the name family (s) starting with 'ups' are actually loaded in the system. Note that at least in versions 9.3 and 11.1.1.3 there was also some hidden lines had to be such that specify the header.

  JOINT TASK FORCE

• Question about the Cycle of layers and the layer of command in PS.

  Is - this intentional that the order of the sequence in Ps is down as opposed to the ascendant when using layers of Cycle? When I create a sequence of layers of Cycle and the first layer is at the bottom and sequential moves upward in the PS import into Ch and then apply a layer of Cycle behavior, games animation back. It seems intuitive to the typical structure of the layers of Ps.

  This is intentional, but we could do an option to go either way. Any other votes for this? What workflow you use PS such that the top layer is at last instead of the first?

  BTW, in PS, you can use layer > Arrange > reverse a workaround in the meantime.

• It is possible to select more than one layer by selecting the first and the last layers?

  I frequently get Illustrator files which are individual objects such as the paths on separate layers that can be grouped together to make the shorter layers. I find that I have to change click on each individual layer to select it to finally bring together them. Sometimes, I have 25 or so layers that I need to select. Is there a way to select the first and the last layer in the layers palette and have Illustrator select all the layers in the meantime?

  Don't know about the selection of layers of first/last, but to select several consecutive layers in the layers palette...

  Option-click on (Mac) on a layer to select it and, with the option always pressed key, drag to the bottom of the list - DO NOT slip on as logical target icons you like.  When you drag to the bottom of the list of layers, the icons of the target will become selected.

  Shift + Option-click allows you to ignore the layers and continue to select consecutive additional layers on the bottom of the palette.

  Note: Drag slowly or some layers would not choose.

  Strange, I know.  It took me years to come across this.

• Map of multiple accounts for an account of the logic

  Hello

  I want to map accounts to an account of logic in the mapping of account dimension table, but the account of the logic I created does not appear in the mapping table. You know the reasons?

  Thank you very much.

  CW

  I'm confused. In the mapping definition logic account account you have defined will be never defined as a source, as it is a construction of FDM and is not present in your target system, you can map to an appropriate target account. In the definition of account of your logic, you have have to specified 3 accounts you want to aggregate and the logic of multiply the value by 1000. It is then you will map the account of logic on behalf of relevant target system in the form of account mapping and as such will fill the correct value

• the escape character in the where clasue always on logical layer

  My application requires "A WHERE Clause" filter on the table of the logic layer where the in-list has grown from a session variable.
  
  for example, I get a session named 'UserList' ('Jack', 'ken');
  
  I want to filter the information by the Userlist, and it seems to a have problem charater escape, the single quotation mark will cause trouble.
  It works fine when I add "' jack', 'ken'" manually in which would adopt, but if I use VALUEOF (NQ_SESSION. ("' userList '), it failed.
  
  
  There is some information for your reference:
  1. in the reply, I want to know the value of 'UserList', here I show in State text: @{biServer.variables ["NQ_SESSION. UserList"]}
  
  It shows as below
  Jack ',' ken
  
  2. in the available session initializaiton block, I test, the "Userlist" works well, it is 'jack', 'ken' as we hoped.
  
  Edited by: island_man August 7, 2012 12:26
  
  Edited by: island_man August 7, 2012 12:27 AM

  Hi user,

  Normal session variable will not work in your case. Opt for the block row of sage of initialization,

  http://Oracle-BI.siebelunleashed.com/articles/rowwise-session-var/

  Kind regards
  DpKa

• Change the opacity of a selection on a layer without changing the entire layer.

  I use Photoshop CS2 for several years to improve my photos, but earlier met with something simple, that I can't find out how.   I have a photo of an interior room with defined exposure mainly for the open window on the background layer, but the rest of the room is very dark.  The only other layer, the top, I got the same correctly exposed for the room, which overexposes the aea of window.  The upper and lower layers are superimposed perfectly, and the top layer is at 100% opacity.  I selected the window on the top layer and to change the opacity of the area selected to mix properly with window on the lower layer without changing the opacity of the layer.  No matter what I do, change the opacity seems to only affect the entire layer, and I didn't understand how to isolate the area selected for the opacity change.

  I can cut the selection to reveal the darker window on the bottom layer, but it does not give me the flexibility I need to balance the two exhibitions. A change of opacity would be ideal.

  Any ideas?

  OK - I've found a workaround.  I made the change of opacity for the entire layer so that the window looked the way I wanted to and flattened the image. It left me with an excellent rendering of the window of the room.  Then I added a new layer with an opacity of 100% with the image of the maid's room, but the overexposed window.  I repeated the selection in the window on the new layer and make a cut, which revealed the right window in the image of the maid's room.  Then I flattened the image and there

  I close this issue as resolved.

• Apply the multiple merge options to the same layer?

  How can I apply layer several options to a single layer of merger? Currently, when I select a merge option and switch to the other, it removes the previous merge option

  Thank you.

  You can duplicate the layer and the upper layer the second blending mode value. Or you can create an adjustment layer and set its blending mode for the second favorite mode (this will blend a visible merged copy of the layers under DOS in the visible stack). It depends on what you're trying to do. In general however, blending modes are a mixture of pixels in a layer in a visible merged copy of those below, to add two modes to a layer seems impossible.