High-availability software ACS 5.2

Similar Questions

• stand-alone server from acs 2008 available software?

  I use acs 4.2 on a windows 2003 server sp2 in my current network. The network has been replaced and I'm a software/windows 2008 Server and build the application. I'm a bit confused as too the available software. The acs software only 5.4 I see is for the appliance and vmware. Is this software available for stand-alone servers is not end of life?  Or can I use acs 4.2 on the stand-alone server and update all the way to 5.4. I think they would have a base at one of the levels 5.x package... Any information would be appreciated

  Hello

  I would like to inform you about the following things:

  1 ACS 5.x cannot be installed on the server of widnows as ACS 4.x

  2 ACS 5.x cannot be installed on the vmware (Linux-based) or as a device.

  3 ACS 4.x is a box of windows-based and ACS 5.x is a device based on linux/VMware

  4. you can configure vmware or a device such as a stand alone ACS5.x box.

  5 ACS 4.2.1.15 is available up to now and is still not end of life.

  6. you can upgrade the ACS 4.2.0.124 to 4.2.1.15, however it is not compatible with windows 2008 r2 box.

  7. you is impossible to pass the ACS ACS 5.4 4.2, you can buy seprate for ACS 5.4 license and then you can migrate the database from 4.2 to 5.4

  Concerning

  Mohammed (useful rate of messages)

• ACS high availability

  Hello

  I have ACS solution engine. Currently, it is connected to the switch using a single network adapter. For the

  high availability to change aside, I want to use the second card netwrok thus linking

  the second main switch as well as in the case of connectivity with a carrot switch break. ACS will be accessible via second switch.

  Network card Ip address is currently 192.168.200.14/24

  How to configure the second network adapter on the ACS in order to achieve high availability.

  Hello

  You cannot use the second NETWORK card on GBA.

  The following link mentions "ACS takes care operating an Ethernet connector, but not the two connectors"

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/ovrvuap.html#wp1053900

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.

• Remove the secondary controller and tertiary high availability for each access point

  I want to remove secondary and tertiary sector controller of high availability for each access point. I have more than 900 APs associated with a Version of the WLC 8510 8.0.121.0 software. What is the best/better way to remove secondary and tertiary controller?
  Or I can create a model first. We use version 2.2

  Hello

  Easiest way:

  Yes you can do this by using the first Cisco Infrastructure, you can create a Setup AP Lightweight model to specify the name of the PDC and the IP address and specify an empty value (choose the first empty option in the drop-down list) and 0.0.0.0 for the secondary and tertiary sector controllers.  Then you can apply this model to the AP, and she must remove (virgins all) values for these fields.

  Long way:

  Yes there is no clean way to remove it from the CLI. you need to manually remove each on the AP.

  Concerning

  Remember messages useful rates

• VSphere hosts high availability 2

  Hi all

  I am trying to achieve the following by using the essential plus the package. I had 2 identical machines with 2 TB of storage. The two are running ESXI and I want to configure high availability and load the pendulum. From what I've read on for them is that vmware needs shared storage so kind of san if I want to use high availability. But I don't have this machine, what I want to achieve is the following: Vmware reflects the discs on both machines (network raid 1) and if a hardware failure occurred on one of them, the other machine will start all the vm remaining. In the same way vmware should do load balancing. From what I've read on the internet vmware had VSA, but this has been discontinued. VSAN is not an option, because I don't have 3 machines. One possible option would be for example starwind but I would have preferred an option of vmware itself.

  So in short it is a way to configure high availability and load with 2 hosts balancing and not shared storage? Preferably without third party software.

  Kind regards

  Sebastian Wehkamp

  Technically, you can use DRBD and Linux (or FreeBSD and POLE if you're on the dark side of the Moon) to create a device block tolerant replication between a pair of virtual machines running on a hypervisor nodes. Throw in

  failover NFSv4 point mounting on top and you have a nice VMware VM data store. Tons of a defined software storage vendors have exactly this ideology within their virtual storage devices if you do not go to the difference

  However as StarWind Virtual SAN is FREE for the installation of 2 knots in the scenario of VMware (Hyper-V licensing is different if you care) and can be run on a free Hyper-V Server (no need to pay for licenses of Windows), you CAN end up with a faster

  back from road StarWind. Depends on what you want from a set of functionality (iSCSI? NFS? SMB3? Online dedupe? Cache?) and what forum do you prefer for public support to ask questions

  --

  Thank you for your response. I thought that since preparations are exactly the same secondary machine would be able to easily start the vm of lost. For synchronization, I thought it would be something like drbd, when unable to connect with the other secondary hosts will become primary. This works in the case of a hardware failure, and network failure half a brain will take place that must be resolved manually. I play with it replicaton and reconsider the starwind software.

• vCO 5.5 high availability / load balancer configuration

  I do a planning for a new deployment of vCO 5.5 and I would like to take advantage of the new features for high availability, but documentation seems to be a little lacking in Department of load balancer. I hope someone knows the answers to the following questions using zero in on possible configurations for load balancing options:

  Calls to instances of vCO they state or can I use a setting of type stateless round robin for the configuration of lb or what do I need to support sessions?

  Is there a health control end point which I can query the load balancer to automatically remove service instances in a configuration active / active failure? If there isn't a specific is a good audit can be done to create a service to act as a health check?

  Did he already works with a configuration similar and willing to share their experiences?

  Hello

  You can read the following article which explains how to configure Nginx as the load balancer. I hope it's useful.

  VMware KB: Nginx Configuration load lalancing software VMware vCenter Orchestrator 5.5

  Kind regards

  Radostin

• OLIVIER components on a server cluster for high availability

  Hello
  
  The requirement is to install OLIVIER 7.9.6.4 (all components) on a clustered high-availability server.
  
  OLIVIER 7.9.6.4 software and versions.
  OBIEE 11.1.1.7
  Informatica 9.1.0
  DAC 11.1.1
  
  I would like to know what software is to be installed on the cluster server and how.
  
  I don't get any Installation Document for this.
  
  Any help is appreciated.
  
  Thank you
  Aerts

  need an urgent answer!

• It is possible and effective: high availability (failover) on 2 guests with local storage?

  Hello

  I have a discussion on the implementation of ha (failover) with 2 guests with local storage.

  My advice is to go with a shared storage. But there is another view, use the cluster failover MS with local storage service to save on the shared storage hardware.

  2 "mirorred" on each host machines. Is it feasible at all?

  The HughesNet: have 2 virtual machines (SQL server and server applications in a highly available environment). The workload of the machines will be raised to 2 very powerful servers that are supposed to be buying.

  1. Please briefly explain a feature of local storage to provide HA.

  2. I got to cluster in the virtual environment, not so I guess that the shared storage is used only in the virtual environment.

  Thank you.

  Michael.

  There is software that can replicate a running, physical or virtual machine to another accessible location on the network. This could be as simple that between two close hosted ESXi of VMS or high-speed WAN. Take a look at things like neverfail, doubletake others.  The costs would probably be a bit prohibitive in a smaller environment. It might be possible and maybe even practice to use a virtual storage device having a failover replication. Use of storage on each host and allows to provide the data store. Open-e

  The Microsoft Clustering solution needs a shared storage.

• Configuration of high availability.

  Hello

  Please help me to configure high availability for Foglight existing environment, please send me the steps and requirements of pre.

  How many servers can exist in a cluster?

  Capacity how do we need on the primary server and the other servers if there is a failure?

  We currently have 1 unifying and 3 child FMS.

  version: 5.6.10

  Thank you

  Vicky

  Vicky,

  There are 2 very useful field guides that go through the requirements and the Setup process.

  High Availability Guide - http://edocs.quest.com/foglight/5610/doc/wwhelp/wwhimpl/common/html/frameset.htm?context=field&file=HA-field/index.php&single=true

  Federation of field guide-

  http://eDOCS.quest.com/Foglight/5610/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?context=field&file=Federation-field/index.php&single=true

  Note the following points, known issue

  http://eDOCS.quest.com/Foglight/5611/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?context=field&file=HA-field/overview.1.php&single=true

  "A master of the Federation running in mode high availability is not supported. Only children Federated can be run by high availability. »

  Golan

• High availability of components in the design of vWorkspace tips

  Hi all

  Would ask you some advice regarding the design of vWorkspace components highly available. Suppose that vWorkspace components will be deployed in vSphere or hypervisors managed SCVMM hence HA is in place, if the failure of a host. In this situation, if we still need components redundant (n + 1 VMS) vWorkspace?

  On the other note, I understand that we can add a couple of broker for vWorkspace in vWorkspace Management Console connections and based on KB 99163 it would just work. I'm not sure how the traffic would be when an application is web access? As in, I guess that the connection broker news would be 'defined' at the request of the web call to the broker for connections. Or this is done automatically? Access Web would choose randomly from the broker for connections to go?

  Thanks for any advice in advance

  Kind regards

  Cyril

  Hi Cyril,.

  Big questions. As with any IT architecture in layers, you must plan HA and redundancy at all points of failure required by your environment or level of Service (SLA) agreements. For vWorkspace, the center of his universe is SQL and you must plan accordingly the failure and recovery. In some environments, full backup can meet the requirement of HA. In others, full SQL Cluster, Mirroring, replication, or Always-On configurations may be required. With our broker, we recommend N + 1 deployment in most scenarios HA. When you move peripheral components or enabling, you must evaluate each component and needs its impact of failure as well as its valuation to determine the appropriate AP.

  Load balancing between several brokers is done automatically by logic in the client connectors. In the case of Web access, when you configure the site Web Access in the Management Console, it includes broker list in the Web access configuration xml file. As client connectors, Web Access includes balancing logic that distributes the client load on brokers available automatically.

  If you have any questions about specific components and requirements of HA or architecture, please add them in the discussions.

• A "Available software update" screen on my home screen

  Original title:

  Software update

  Hi guys

  A "available software update appeared on my home screen, there is no sign of any brand or company logo to this topic whatsoever, someone that has it on their pc and how do I get rid of him? Sorry it says it's an update of the browser

  Hi Palcouk thank you very much for your reply,

  My browser is IE

  I have since bought an internet security program and it disappeared

  Thank you

  concerning

  Mickydazzler

• WLC 5508 high availability

  Hello

  Today I have two WLC 5508 (with license for 100 AP each of them), on a single site.

  The WLC work availability (active-standby).

  However, we have a new scenario, with 02 sites: A and B (attachment).

  I would like to know if it is possible to work as follows:

  The WLC - A as the main controller of site A. WLC - B as a backup (BDC) of WLC.-a.

  The WLC - B that has the PDC site B. WLC - as a backup (BDC) to WLC - B.

  For example:

  If WLC - a falls, site access Points are managed by B WLC site - B and vice versa.

  Is this possible?

  How can I configure the new scenario? Don't forget, there is a site-to-site between Site A and Site b.

  Another point:

  If I add more than 50 APs on Site A. How does the license number?

  Should I buy a license for the two WLC?

  TKS,

  >....

  >.. .is it possible?

  No. , high availability in terms of controller is supposed to be what is said, the backup controller is not 'full' - stby and cannot play other roles.

  M.

• need to run Lexmark optra e310 with windows 7, it is available software player?

  need to run Lexmark optra e310 with windows 7, it is available software player?

  Installation Optra E310 printer driver under Windows 7.
  ======================================
  1. "Start" > "Control Panel" > "devices and"Printers".
  2. "Add a printer".
  3. "Add a local printer.
  4. Select "Use existing port" > select "USB001" in "drop-down list.
  5. Press the button "next".
  6. Press the 'Windows Update'.   {waiting while the new drivers are downloaded}
  7. Select the "Lexmark" manufacturer
  8. Select the printer "Lexmark Optra E312' PS or Ms.
  9. Press the button "next".
  10. Rename "Optra E312 to E310.
  11. Press the button "next".
  12. Press the button "Finish".
  13. End.

  You are ready to print.

• IPCCX high availability

  Does anyone know if Cisco will provide redundancy standby high availability of IPCC express?

  Chris

  Search in the next major version of the IPCC Express. Last I heard it was scheduled for release next month some time.

  Jim

• Deployment of high availability of the IPCC 4.5

  In a future HD architecture implementation, the voice service will provide CallManager 5.0, that will integrate with 4.5 of the IPCC. 4.5 (required with 5.0 CM) IPCC does implement a high availability. How can we ensure that technical support continues to operate if the IPCC goes down? One possibility might be to configure CM such that if the IPCC goes down, all the number of help desk calls are automatically and immediately headed to a group (which includes all extensions help desk). This redirection can be configured in CM? Is there a better option?

  Thanks in advance,

  SB

  This is your best bet. On the road Points for your call center just put the call before busy, no answer and failure to the fighter pilot. Thus, when the IPCC Express Server is down it will sent to your fighter pilot.

  Please evaluate the useful messages.

  adignan - berbee