vCO 5.5 high availability / load balancer configuration

Similar Questions

• Load Balancing configuration failed with the failure of the connection shared after 11.1.2.2 11.1.2.3 upgrade

  Hello

  We have our EMP system had put 11.1.2.2 to 11.1.2.3 and it's a broadcast environment (Windows 2008 Server) and in one of the server, we installed FDM and after 11.1.2.2 upgrade to 11.1.2.3.

  When we load balance FDM Configuration, SSP is failed with " Shared Services Connection Failed '

  What I did:

  Deleted all entries in the object load balancing DCOM {E652643D...} and the Application Server Config {26AD6592..} and the COMJNIBridge DCOM objects. Re-directed EMP config for FDM application server

  and reconfigured the FDM with mycmsc\svc_hyperionfdm of the user application server. Config of load balancing is still unable to the connection of Shared Services with the error "Shared Services cannot connect".

  I tried the local administrator user but fails in the same way

  Windows system log entries:

  The application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} server application and the APPID

  {E652643D-6CC1-48AC-915D-01842B04F292} the user NT AUTHORITY\SYSTEM SID (S-1-5-1 of the address LocalHost (using LRPC).

  This security permission can be modified using the Component Services administrative tool.

  Windows Application log entries:

  Recovery of the class factory COM for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.

  COMJNIBridegWrapper.log entries

  08/07/2014 10:42:06: unknown COMException error

  at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall (Object o, Type objType, String name, Object [] args, paramnames, CopyBack [] Boolean String, Boolean IgnoreReturn) at

  Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall (Object Instance, Type, Type, String MemberName, Object [] Arguments, String [] ArgumentNames, TypeArguments, Boolean] [] Type

  CopyBack, Boolean IgnoreReturn) at Hyperion.Fdm.Api.Common.Security.Authentication.AuthenticateUser (String userName, String password, the domain, String String & ssoToken)

  Hello

  Finally, we could solve this problem. Thank you for all your help.

  Kind regards

  VJ

• BONES of PIX v6.3: Load Balancing Configuration

  Using the new feature of balancing by OSPF, is it possible to create a parallel table of the PIX to simulate a "dynamic load balancing environment"? Please explain why or not.

  If the answer is no, then, is it possible to create an environment of load balancing 'static '? How would this work? advantages and disadvantages?

  Kind regards.

  Fix... You need something in front of and behind the Pix to ensure that a session is maintained through the same Pix. This can also be done by NAT.

• Someone at - he set up the Insight Log load balancing?

  Hello

  We try to log configuration Insight in a load-balanced, and cluster configuration. After the search tirelessly for blogs, the question on this forum, or other persons who completed it and shared their installation that I found nothing. The only thing that comes close is http://sflanders.net/2014/05/01/log-insight-2-0-beta-load-balancing/ , but indicates only how it will come in a future post!

  I was going to Setup Proxy HA, but from my understanding it will not charge the way UDP traffic that newspapers Insight will want to have it transmitted information. Because we want to send more, otherwise all traffic to syslog to log Insight area, we would need to use UDP 514.

  Those who have actually set up load balancing, you followed a guide? If not, could you share how you accomplished, setting up your environment to balance between several workers?

  Any help is appreciated!

  -Patrick

  Hey Patrick,

  I just posted a more practical guide this morning: http://sflanders.net/2014/06/24/log-insight-external-load-balancer-configurations/

  You can use HAproxy, but if you need UDP, then you're right in that it will not be to your needs. If you are looking for a free/free alternative, take a look at: downloads | Load balancer Zen

  If you have any other questions, please let me know!

• Overview of VMware View 5.2 Load Balancing

  Hi guys,.

  I use VMware view Horizon 5.2 and my infrastructure is as follows:

  2 view x servers security

  2 view connection x servers

  Can anyone please guide me how to configure load balancing and what are the best practice Horizon of VMware View load balancer configuration.

  See you soon

  http://pubs.VMware.com/view-52/topic/com.VMware.ICbase/PDF/horizon-view-52-architecture-planning.PDF

  Simply place your load balancer in front of the two security servers. This is indicated on page 70 - figure 5-2.

  If you also want to allow access by internal users, and then add two replicas more connection to the server. This is indicated on page 71 - figure 5-3.

  Your reviews will connect to the alias balanced appropriate load.

  Mark

• Cluster high availability

  How can I configure a cluster of high availability in Gemfire? I need a cluster with two nodes and two servers.

  For high availability of data, configure the redundancy of your data regions; If you are using partitioned regions, see Configure a maximum availability partitioned region in the user's Guide the GemFire, for all the details and options available. You can also use the persistence.

  For client/server e-mail high availability, see Configuring highly available servers.

  For high availability of function execution see running a function in vFabric GemFire.

• manual load balancing or tnsnames load balancing

  Hussein,
  
  We have 2 nodes apps (apps1 and apps2 both on a separate machine) connection to a database of cars 2 nodes (db1 and db2 both on a separate machine).
  We want to apply the load balancing across 2 application servers. I "heard" can be actually using the tnsnames.ora load balancer? Or I'm just out of this world. :)
  
  Thank you very much
  
  Ms. K

  Salvation;

  Please check below and see its helpful:

  11i RAC JDBC & listener Load Balancing Configuration [244366.1 ID]
  Implementation of load balancing across Oracle eBusiness Suite - Documentation specific Load Balancer Hardware [ID 727171.1]
  In 11i [ID 148516.1] load balancing
  How http://ID to ensure the load balancing of concurrent process CFP - RAC Configuration Manager 762024.1
  Configuration of 11i for balancing [ID 117421.1]
  JSP error after implementing [ID 269208.1] JDBC load balancing
  How to configure the load balancer for Workflow 2.6.3 [ID 311803.1]

  Respect of
  HELIOS

• Configuration of AppsTier (CFP, load balancing) of nodes R12 Multi with RAC 2 nodes

  Dear all,
  
  I installed and configured applications R12 with Oracle RAC 2 nodes. (APP1, DB1 and DB2).
  
  Now, I need to add a layer of application (APP2) to configure high availability, balancing load and PCP.
  
  So, I cloned (adcfgclone.pl appsTier) application for APP2 layer (not shared, the two file systems are different). When I run the application it doesn't knot APP2 App1, more more simultaneous manager works only on a node (can be due to APPLCSF does not point to the mounting NFS share folder), although I've defined managers primary school-children also.
  
  If I run the autoconfiguration of APP1 application service will only work on APP1 and even if I do for APP2, then application works with APP2. I need to have configuration CFP, balancing the load (via DNS if possible) and the high availabllity for the Application tier.
  
  When I start the application, it will start OPMN and APPS Listener on the nodes, but simultaneous manager does not start on both, to a single node.
  
  Is this requires having both APPS name of the node is the same?
  
  Thank you very much
  
  Ravi Purbia
  
  Published by: Purbia delighted on June 9, 2009 18:04
  
  Published by: Purbia delighted on June 9, 2009 18:05
  
  Published by: Purbia delighted on June 9, 2009 18:07

  Ravi,

  If I run the autoconfiguration of APP1 application service will only work on APP1 and even if I do for APP2, then application works with APP2.

  Most likely, it's something with the profile option values, then run utility adchkcfg to get an html report that lists all files and profile options that change when you run AutoConfig on each node.

  I need to have configuration CFP, balancing the load (via DNS if possible) and the high availabllity for the Application tier.

  For load balancing, you must perform the steps according to the guidelines of this document.

  Note: 380489.1 - using Load-balance with Oracle E-Business Suite Release 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=380489.1

  For the installation of the CFP, please see:

  Note: 388577.1 - using Load-balance with Oracle E-Business Suite Release 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=388577.1

  When I start the application, it will start OPMN and APPS Listener on the nodes, but simultaneous manager does not start on both, to a single node.

  Any errors in the log file of CM?

  Is this requires having both APPS name of the node is the same?

  It is not necessary.

  Kind regards
  Hussein

• How to configure das MD3200i load balancing

  I would like to connect a MD3200i (with two raid controllers) to one of our Windows 2003 R2 servers without the aid of a switch.

  After most of the documentation, some things remain pretty obscure to me. I'm new to MPIO/balancing and cannot figure how to set up.

  Is it possible to connect 1 nic host to RAID 0 and another host nic to RAID 1 and then combine the bandwidth? Thus having 2Gbs instead of 1Gbs? Or is it only a redundant path sollution, happening the other controller in case of failure of the first line. How can I configure this regarding the IP addresses, subnets. And where is the configuered to load balancing. This is explained in the documentation? I can't find it. I found a few examples that include the use of a switch, but none with das sollutions.

  What I have is 4 the MD3200i UTP cables to connect to the host. 2 the high raid controller and 2 on the lower raid controller. And use that I have 4x1Gbs, resulting a connection 4Gbs to a single partition on the MD3200i of load balancing.

  Thanks for any help.

  Multiple paths and in windows 2003 load balancing is managed by the driver MPIO is installed when you install the 'host' or 'full' version install MD Storage Manager. There is no need to separately aggregated network adapters to get the aggregate bandwidth. The pilot, by default, uses repetition alternated on all ports connected to a single controller.

  Also, for a single virtual disk, all i/o through a single controller and the second controller acts as a redundant path. So, if you have 2 x 1 Gbps connections to each controller, you will have, at most, 2 Gbps for each partition. Now, each controller can have virtual disks, so the second controller may have a second partition that will also have a separate between 2 x 1 Gbps connection.

  You can set IP addresses and subnets that are similar to the way that you would with a switch as long as you can test the connection port. It would be wise for each NETWORK card on the host on a different subnet and each port on the MD3200i on the corresponding subnet. This will make it easier when you set up your iSCSI.

  You can use the configuration utility to MD in place your iSCSI sessions too

  -Mohan

• Configuration of high availability.

  Hello

  Please help me to configure high availability for Foglight existing environment, please send me the steps and requirements of pre.

  How many servers can exist in a cluster?

  Capacity how do we need on the primary server and the other servers if there is a failure?

  We currently have 1 unifying and 3 child FMS.

  version: 5.6.10

  Thank you

  Vicky

  Vicky,

  There are 2 very useful field guides that go through the requirements and the Setup process.

  High Availability Guide - http://edocs.quest.com/foglight/5610/doc/wwhelp/wwhimpl/common/html/frameset.htm?context=field&file=HA-field/index.php&single=true

  Federation of field guide-

  http://eDOCS.quest.com/Foglight/5610/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?context=field&file=Federation-field/index.php&single=true

  Note the following points, known issue

  http://eDOCS.quest.com/Foglight/5611/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?context=field&file=HA-field/overview.1.php&single=true

  "A master of the Federation running in mode high availability is not supported. Only children Federated can be run by high availability. »

  Golan

• VPN3000 Load Balancing - synchronization of the Configuration

  I have found information on the configuration of hubs for load-balancing and realized that. I can't find any information on how the Member devices keep their configurations in sync. Is it automatic or is it necessary to update all members manually when changes are made?

  Dennis,

  Automatic synchronization of the configuration on the hubs is not possible. You must manually synchronize the configs.

  See you soon

  Gilbert

  Rate this post if it helps

• How to configure OAM 11.1.2 the script load balancing?

  Hello

  I am currently setting up Oracle Access Manager to work with load balancing

  I'm doing this configuration:

  In fact, I did the configuration with my browser, and I'm looking to do the same thing with a script.

  Where is the configuration stored? Domain configuration file? DB store?

  Is there a command WLST to do this config?

  Concerning

  An excerpt from wlst that will do the trick:

  domainRuntime()

  name = ObjectName ("oracle.oam", "type", "Config");

  writeSig = ["java.lang.String", "javax.management.openmbean.CompositeData"]

  oamHostKey = "DeployedComponent/Server/NGAMServer/profile/OAMServerProfile/OAMSERVER/serverhost.

  oamPortKey = DeployedComponent/Server/NGAMServer/profile/OAMServerProfile/OAMSERVER/serverport"."

  oamProtKey = "DeployedComponent/Server/NGAMServer/profile/OAMServerProfile/OAMSERVER/serverprotocol.

  MBS. Invoke (name, 'applyStringProperty', [oamHostKey, StringSettings(oamHostKey,"__myhostname__").toCompositeData (StringSettings.toCompositeType ())], writeSig)

  MBS. Invoke (name, 'applyStringProperty', [oamPortKey, StringSettings(oamPortKey,"__443__").toCompositeData (StringSettings.toCompositeType ())], writeSig)

  MBS. Invoke (name, 'applyStringProperty', [oamProtKey, StringSettings(oamProtKey,"__https__").toCompositeData (StringSettings.toCompositeType ())], writeSig)

  its dynamic and you need to worry about increasing the version number or concurrent access, etc...

• Can someone tell me what the recommendation of Oracle is on how to best configure the load balancer?

  We are currently using the "configuration.properties" file to identify load balancing our servers, but we are curious to see if it is the recommended method to configure load balancing, or if there is a better way.

  I opened a case with Oracle support and asked the same questions - entry configuration.properties of the file servers is the only supported method used by Peoplesoft to balancing upward through 8.54.

  See also: how the Installer Application Server Load balancing and failover (Doc ID 1252846.1)

• Where to configure clustering: on the web server or a load balancer?

  Hi all

  a few installation questions. I read on clusters and where to set up the pool. My main goal is to reach stickness session, session failover. but I'll ask them later when I clarify below.

  If my installation is

  -> Cluster WebLogic Web server, I need to install the cluster weblogic web server plugin.

  If my installation is

  Balancer load-> cluster WebLogic, I need to configure the LB, cos the LB must meet certain criteria.

  My planned Setup is

  Webserver-> LB-> cluster WebLogic. the weblogic balancing is done at LB. I'll have to set up the LB to balance to the cluster.

  I think I'm NOT configure the weblogic on the correct Web server plugin?

  Configuring the web server is obviously a proxy directly through the lb.

  So my next qn: the configuration to the LB is to balance the weblogic cluster OR a list of all the backend .jsf page server? Assuming that my application launch page is a jsf page. Enjoy your advisor.

  (a) you have little sticky on LB. On the Web server, Weblogic Plugin will take care of permanent sessions.

  (b) Yes, you need to add to your weblogic.xml in the application. There will be no conflict. However, your heap memory usage will increase as you could store session information on two servers.

  "Circumstances and considerations should I need a LoadBalancer in front of my weblogic cluster? --

  The main reason you would use a load balancer is to keep the VIP for your application. He would charge the balance between the weservers. Also usually SSL is stopped at the level of load balancer. It helps you reach cross clutser replication etc... You can read this document... Failover and replication in a Cluster

• Configure load balancing NETWORK for Exchange 2010

  Hello guys.

  I need help. Where I work, we have a project where we configure Exchange 2010 DAG and some other stuff, and we have 2 ESX with 1 CAD server and a Server CASE/HUB too on both of them and that we want to use the NLB on these two hosts.

  I found this, and this is much like what we want:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006525

  So now our switch we want to create a virtual IP address for each of them, but we are not sure if we need to create a cluster on our servers for this.

  Did someone done this before that could give me some advice or contains information to make this work?

  Thanks for your help.

  Howdy,

  Am I was right assuming you want balancing two virtual computers CASE/Hub and NO servers DAG?  If Yes, then we are good to proceed... (if you want to do DAG servers load balancing, or if the DAG servers have all three roles, MBX/CASE/Hub, then Windows NLB is prohibited).

  You don't need to create a cluster as in MSCS or the Windows failover cluster, but do not create a pool of machines for load balancing.  You must install the components of Windows NLB on each machine virtual (VM Hub/CASE) and then follow the procedures described in this document: http://www.vmware.com/files/pdf/implmenting_ms_network_load_balancing.pdf to correctly configure the ESX host.  There are two ways to configure a WNLB, using the multicast and uni-cast (by default).  Uni-cast requires configuration changes side ESX (detailed in the document), multi-cast has some dependencies upstream network, mainly adding static arp entry in the router.

  Take a read through the white book (it was written by VI3, but the same thing applies in vSphere) and let me know if you have any questions.

  -alex

  Check out our Blog: http://blogs.vmware.com/apps