High ping and my internet is de-energized

Similar Questions

• Lag and high ping WRC1900AC and League of Legends

  My kids play the League. When they connect via wifi, they get high momentary pings who accuses the game.  If they connect via a cable, it does not.

  I've prioritized League in quality of Service, as well as their laptops. Still having the same problem.

  I changed channels on the 2.4 ghz to a channel that does not have other access points.

  I have reset and reflashed firmware, without effect.

  I get huge prod on the router, both local networks and the internet.

  This problem has occurred in the old router with same ISP set up.  The problem does not occur when they use their laptop at home of friends. It must be the captain in 1900.

  Anyone else have any ideas?

  Try with WMM Power off.

• spinning cursor, stands, front, upgrade to El Capitan, upgrade to internet high speed and added SSDS but no change

  I just wheel spinning, lasted about 30 seconds.  Frequently, before and after the upgrade.  Add a SSD and increases internet speed from 10 to 25 - no visible change in the stalemate.  At the end of the present statement said that it has been updated about an hour ago.

  Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide an overview of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• After the upgrade to windows 7, download high ping on most of the servers battlefield 2 and started from servers

  Have windows 7, Quad Core. ASUS Pt6, geforce 5850.  no problem until this only changed for windows 7

  Make sure that you have nothing else to access the network. Sometimes Windows Update can cause a high ping. Is this the game online you this experience?

• Windows 7 high ping game Battlefield 2

  Constantly getting booted from servers Battlefield 2 now that I have windows 7, for a high ping!   someone help please

  Hi jfj64,

  Welcome to the Microsoft Answers site!

  There are several ways to reduce your LAG, one of them is by adjusting your graphics and the sound settings so that the computer does not put as much effort in order to ensure that it is a standard better that they really need to be.

  However, it is not only the game settings that are causing this high ping. Today, many of the internet, perhaps from different countries, have connections faster than others. If the majority of players on the server have a connection faster that you, then you will experience lag (they will be faster game speed).

  Also, when you join a server, on the list of the browser, it is a good idea/good practice to check the ping to the server (it is described as the latency on the server list). This number is, the speed/quality it will on your computer.

  You will never have the quality when playing on internet, as a lot of people come and go, different events in the game occur (which causes the game to freeze for a very small amount of time while the server updates).

  The only real way to get rid of it must have a faster connection and check for latency on the server list. Firewall software and hardware is also responsible for some slowdowns on the game. However, these are necessary in order to ensure that your computer remains stable and free from virus.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• higher Ping on windows 7 home Prem x 64 on xp32bit

  My problem is with ping and latency in a game called soldier of fortune platinum older edition.  ping times are 30-40 points higher. I searched high and low forums and found nothing that actually helped me to solve this problem. all my drivers are up to date according to windows and the bios ect. Here is my card on my computers and connection.

  3 MB per second of att dsl service

  gaming platform:
  Intel i7 920 Quad Core 2.66 ghz (overclocked to 3.2 ghz), cooled liquid by Aztec system
  6 GB corsair dominator ram @ 1600hz
  2 320 GB HDD's in raid 0
  motherboard is asus p6x58D Premium with the integrated realtek hd audio and 3 gigabit ethernet ports
  additional network card is a xeno pro nic bigfoot killer
  support ati radeon 5750hd 1 GB ddr5 w/dx11 mem

  Please someone help me. I was pulling my hair out for days.  frustrating having built something like it to have it run poorly. Thanks in advance,

  Loco

  Click with the right button on the prompt in the start menu > all programs > assesories, then click on run as administrator. Type "netsh interface tcp set global autotuning = disabled" without the quotes and press ENTER. now, go to network and sharing Center and go to manage networks on the left side. Right-click on 'Local network connection' and go to properties. Not click on Qos packet scheduler and choose uninstall. You can google two of those to see what they are for, but with tcp auto tuning and qos all removed you will see great improvements. Home page: http://deadwinter.servegame.com RSS FEED: http://deadwinter.servegame.com/?feed=rss2 Podcast: http://totemsoup.podbean.com/

• Download booted from the games online for high ping rates

  Original title: high ping rate

  When you try to play online multiplayer games in Windows 7, I keep getting starts to have a medium too high ping. Is it possible to accelerate only? I have done speed tests and am running at speed more than enough for anything but games!

  ----------------

• Network connection wireless and cable - Internet access that allows on a computer that is connected to the network cable connection to a networked computer

  I have 3 desktop PCs. Machine A is Win 7, the B machine is XP, the C machine is XP.

  Machine A is connected to the router via cable and internet connection works. Machine B is wireless (the same router as a machine) and the internet connection works when I used that machine has b. Now I plugged in the machine C B machine with a crossover cable and wireless internet machine B does not work.

  I tried the IP and gateway addresses manually (since deleted). If I ping the computer A to B I get the answer to time to stop and even if I ping the B to A computer. However ping computer B to C and C to B work.

  I hope that I have omitted some important parameter, if anyone can point me in the right direction

  Hello

  If the bridge, the connection between C and B is the first to be configured with a static IP address that is on a different subnet * and then fill.

  Alternatively, you can use ICS, http://support.microsoft.com/kb/306126/en-us

  * On the subnet

  Classical IP looks like this (example), 192.168. 1 .x the first three groups are also called subnet, they identify specific network, x can be a number between 0 and 255 and it identifies each unique device on the network.

  An IP address of 192.168. 2 .x would be a subnet to another network.

  To assign a static IP address, see http://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How can I get a WRT320N to respond to a ping on the internet

  I need for my wireless router WRT320N respond to a ping on the internet and that you don't see the option in the interface.  How do you go.

  DAN

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...

  Once you return to the game to the top page, click the Security tab and uncheck the box filter anonymous Internet requests and click on save settings...

• Loss of system sounds and the internet, speakers pass test.

  I have seen this issue a couple of times for its complete loss, but only once for my specific problem.  I am running Windows Vista 32 - bit OS with speakers Realtek High Definition Audio on a HP Pavilion Media Center m7760n.  I have run the diagnostics on my speakers and that they work properly.

  Here's my question:

  Lost computer system sounds and flashplayer/internet despite the audio device in place and work properly.  I still have sound when playing Windows Media Player and iTunes, so it doesn't seem like a problem of device or driver, although I did uninstall and reinstall the driver.  I also performed some diagnostics on the speakers and in the test that they did play sounds, but they haven't played the system sounds in the sounds/system folder.  Another strange appearance is the presence of the sound of my PC, an alert tone, I don't remember having heard it before and cannot be bound.  These are the programs that have been installed around the time I lost sound: Windows Update, Package of device driver of network adapters Apple and Serial Bus controller device driver Package universal of Apple, Inc.  This computer has always run Vista, so is not upgrade, and I don't think it's a Service Pack, it could only be that of the update, so I don't know if these answers would really help me.  I searched on Google, CNet, HP and the basis of knowledge of Windows without success.

  Here is a link to a question from CNet which reflects mine, but relates to the execution of a registry cleaner, that I did not.  http://forums.CNET.com/5208-12546_102-0.html?ThreadId=345265

  I read on one of my research about it being a registry with Flash or a missing codec problem, but it wants me to download K-Lite codec pack which I don't know that I need.

  I run a restore if there is no available answer, but it would be good to know what the problem is.  I can't be the only one with this problem, if there is someone out there who knows how to solve this problem, your help would be greatly appreciated!

  Terri,
  If this problem started when you downloaded the updates listed in your first post, you tried to remove these updates to see if the problem goes away?  What are the Apple updates that you noted in your post - what kind of Apple devices you have installed?  And what Vista update - what is has been downloaded just before this problem?  Just try to identify what it is a very strange problem with it only affects some sounds, but not all.  I know that some Vista updates can return drivers for Windows by default, crushing the drivers from the manufacturer, so you could check and make sure you have the latest drivers from the manufacturer and not the default Windows drivers.  Also check your templates of sounds in the control panel.  Try selecting different models of sounds to see if any of them will play sounds.  As a first step, you said that the sound works with Media Player and iTunes, but in your last post, you said that it gives you an error when you try to play a CD.  What is the exact error and what program are you trying to use to play the CD?  I know that you do not want to do the system restore, but you may need.

  Here's one thing to try before you perform the restore:
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  LST know us if this has been helpful for you and how we can be of further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why lightroom 5.7.1 patch for the dvd version does not support the Elimination of fog and the internet the trial version only?

  Why lightroom 5.7.1 patch for the dvd version does not support the Elimination of fog and the internet the trial version only?

  I have the dvd of my camera samsung nx3000 and got version and upgrade to 5.7.1 (high-end) and it is not the removal of the trial version of lightroom download creative cloud fog. How to get this tool software mi?

  Hi nicoa,.

  Dehaze feature has been introduced in the version of Lightroom CC2015.1 and is not a part of 5.7.1 version which is the previous version.

  If you need the dehaze feature, you must subscribe to plan creative cloud so that you use the latest version of Lightroom.

  Kind regards

  Claes

• Have WIN 8.1 and running Internet explorer as web browser cannot get Thunderbird to be my e-mail by default Web pages, keeps wanting to use MAIL!

  Have WIN 8.1 and running Internet explorer as web browser cannot get Thunderbird to be my e-mail by default Web pages, keeps wanting to use MAIL!

  About the prior Toad Hall "Windows default" comment. That was really the key to the problem - windows by default does not work unless ALL the boxes on Thunderbird are checked. I had used TB along right but wanted to send a few photos and the default TB has not been recognized, though even I had used for a few months. Where discover the box the letters on TB has been verified not a made only of the disappearance of the problem. Tried the default Windows repeatedly route to nothing does not.

• My email on my iPad (version 8.4.1) application froze on a white page. I tried to power down and restart. I know I get emails that I can hear the ping and see numbers on the app. It has been frozen for a day and I have no way to display

  My email on my iPad 2 (IOS 8.4.1) froze last night on a blank page I was trying to send a few photos. I know I get emails that I can hear the ping and my email application shows that I have two new. I tried to put this off, then restart, but nothing changes. When I type my email application it goes to the blank page and after a few seconds goes back to my home page. I'm leaving on a trip to Europe at the moment I'm in a bit of panic. Any help will be greatly appreciated.

  You tried to close the Mail application via the taskbar of the iPad: force an app to close on your iPhone, iPad or iPod touch - Apple Support ?

• Some Antivirus is locking up what I try to do. Its called Antivirus Scan. When I try and US Internet Explorer its locked all together towards the top.

  OK, so everything is messed up! Not happy. I have some antivirus a little trying to make me buy stuff here. But that's not all his locked my computer to download anything or update. His appeal analysis Antivirus! If I try and open Internet Explorer locks it upward and said "Warning of Internet Explorer - visit this site may harm your computer!" and I got a window that keeps popping up saying "Application cannot be run. The file wuauclt.exe is infected.
  You want to activate your antivirus software now? "Please please help me.

  This looks like one of the fake antivirus applications that gets allows you to install malicious software. Try to run several malware scanners. It is better to run more as each will be looking for things that the other miss. Some scanners, you can try are:

  • Malwarebytes
  • SUPERAntiSpyware
  • Ad-Aware
  • Windows Defender
  • Spybot S & D

  If malware scanners above do not find malware or may not delete it, you should consider the assignment in one of these forums using specialized malware removal:

  • http://forums.Spybot.info/
  • http://www.spywarewarrior.com/index.php
  • http://Forum.aumha.org/
  • http://www.bleepingcomputer.com/forums/
  • http://www.spywareinfoforum.com/

• Microsoft Windows XP and Norton Internet Security

  Hello
  I have a problem with my laptop Toshiba Portege R200. After the new installation of MS Windows XP Professional with SP2 and all recommended Toshiba drivers and utilities and the installation of Norton Internet Security 2005 AntiSpyware Edition laptop starts repeatedly with delay. The delay is manifested by jump for 1 to 2 minutes between when the icons are loaded on the desktop and programs (their icons) are loaded into the system tray. In this break, the system tray has no answer to all actions and the CPU is fully charged (the fan continues its maximum). In addition, sometimes the computer doesn´t wake up from sleep or hibernation mode.
  I saw this problem with Symantec Corp., and they confirmed my suspicions that some Toshiba drivers or utilities collide with Norton Internet Security system services, but they don t know which of course.

  I want to ask you if you know something about this problem because there are a lot of utilities and drivers Toshiba and it is impossible to just try on which we put problem and it is also impossible to use Norton Internet Security on my laptop.

  I would like to add that all used Toshiba drivers and utilities are up-to-date as well as MS Windows XP and Norton Internet Security. The computer has certainly no viruses as well.

  Thank you.

  Hello Martin

  I had the same problem with the Satellite P20 (1 GB of RAM). I installed the Sophos anti-virus application and after that, I noticed the same situation. The delay is certainly due after installing antivir software. I deleted and everything works fine now.

  It makes sense that the software companies are trying to complain of producers for laptop but my experience is that Toshiba has designed tools and utilities have no influence on the applications of antivir. I recommend you to test different applications with antivir. I tested it with Trend Micro PC - cillin Internet security and AntiVir guard. Two of them works well, and I noticed that the problem has disappeared.

  Good bye