High rate of error SSL in FxM

Similar Questions

• what I do with error SSL 61?

  I get the following error: error SSL 61: you hva not chosen to trust the server's secure high assurance COMODO CA, the issuer of the security of the server certificate

  Hello

  1. do you have Comodo Security software installed on the computer?

  2 is specific to the program the issue?

  3 did you last modified the software on the computer?

  If the problem is specific to Comodo then I suggest you to contact Comodo support at:

  http://www.Comodo.com/support/Comodo-support.php

• That means "a high rate of 13 split I/O per second?

  I have generated a system health report and he gave me this warning: "the high rate of 13 split I/O per second has been detected. This represents 54% of the total I/O process. Look at the size of the I/O process compared to the size of the disc format and defragment or reformat the disks with a high I/O split. »

  He also gave me: "investigate why 22% (5 416) events were lost during data collection. Settings for maximum buffers for Windows event trace (ETW, Event Tracing for Windows) and the size of the buffer is perhaps not optimal depending on which data sets are collected. »

  And yet the drive check to see all the "success." Certainly, gravity is only a 'warning', but what is the average thing split IO? This means reformat my hard drive of the system? I've defragmented yesterday evening and have a lot of space on the disk.

  This means my CPU or motherboard goes wrong? Lately, when loading of ABIT EQ, the alert sounds the HyperTransport, until I have click on default (to reset the range, which has the characters corrupt in there - but not for the current actual rate of HyperTransport). I apply, and the beep goes away; but I find myself having to keep doing. Possibly associated with (and the only other thing I'm really proven recently, as I had posted in another section of the forum), is every time I watch a video online (YouTube, etc.) or a DVD, if I leave the mouse alone for a minute or more, the screen becomes the password | Quick screen and I have to re-enter the password (unless I catch it and move the mouse before the end). In the Saver screen and re - apply '(none)' fixed this - but I have to do after never watched video.

  Any ideas on what could be going on here?

  Hi EyeAmSMF,

  Split IO/sec indicates the rate at which the disk I/o requests were divided into several applications. A split i/o may result from demand for data in a format that is too large to fit into a single i/o or that the disk is fragmented on single disk systems.

  Access the link below to find more information about the error of e/s/s Split.

  http://msdn.Microsoft.com/en-us/library/ms804035.aspx

  However, it seems that the problem is not persists after reinstalling Windows Vista.

  Regarding the installation of Service pack 2 for Windows Vista, I suggest to download the standalone version of Service pack 2 from the link below and try to install it and check if it works very well.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  You can also navigate to the link below and follow the steps on how to install Service pack 2 on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix the error SSL 61 (Linux OS)

  Whenever I try to connect to my customer's internal Web site light Linux OS I get the error SSL 61. Firefox is the only browser on the workstation. There is no connection problems of Non-Linux systems on any browser, including Firefox.

  Below error:
  SSL error
  Contact your Helpdesk with the following information:
  You chose not to approve "Go Daddy Secure
  Authority - G2 of certification', the issuer of the server
  security certificate (SSL 61 error).

  How can I fix this error? I tried to install the cert manually at the client.

  COR - el: this does not resolve the question for SHA1 certs.

  I added the certificate to the Citrix DB. I finally found the problem after researching on Citrix forums and other various sites.

  This question is the cert itself, we bought a cert and use SHA2, however the Citrix Receiver of Linux does not support at this stage the SHA2.

  So either the only resolution retype the cert to use SHA1 or wait for an update from Citrix.

  Thank you both for your time.

  c

• I still have to pay the 29.99 as I am an instructor and cannot afford the higher rate.  I see the rate for students and instructor is 19.99 per month, which is easier to handle.

  I still have to pay the 29.99 as I am an instructor and cannot afford the higher rate.  I see the rate for students and instructor is 19.99 per month, which is easier to handle.

  Adobe in education... Start here https://creative.adobe.com/join/edu

  Educational https://creative.adobe.com/plans?plan=edu

  When you purchase a subscription to education, the terms you "click to accept" should be clear about the first/last years

  -Intro price http://forums.adobe.com/thread/1448933?tstart=0 one can help

  http://www.Adobe.com/products/creativecloud/students.edu.html

  http://www.Adobe.com/education/students/student-eligibility-Guide.edu.html

  Redemption Code https://creative.adobe.com/educard

  Proof of ID http://www.adobe.com/store/au_edu/academic_id.html

• A general error occurred. Found dangling error SSL

  I get the following error message when you try to convert a Windows 2003 server with converter 5: a general error occurred. Found dangling error SSL.

  I read this article http://KB.VMware.com/selfservice/microsites/Search.do?Language=en_US & cmd = displayKC & externalId = 2002296 but to the Phisical DNS server is fine. It can solve all the names I've tried and hosts file that only contains the entry for localhost.

  Also, I can't find messages like these ones:

  [#18] [2011-06-29 10:50:34.904 04732 WARNING "App"] [, 0] [NFC ERROR] NfcNewAuthdConnectionEx: Could not connect pair. Error: Failed to search for host for server host.domain.abc address: no host is unknown
  [#18] [2011-06-29 10:50:34.904 04732 info "App"] [, 0] Error opening 2338 disc vpxa-nfc: / / [VMFS02]

  Any ideas of what I should do?

  The agent log:

  WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 192.168.128.116:902

  your VC is not visible from the source machine.

• Another Question error too high rate data

  Hi all

  I saw a few posts about pgc errors, but most of them deals with slide shows and video not; and I can't find anything with the REF = KApgc error.

  I'm just all my movies on a DVD created, not rocket science.  I use the 'submenu Film' preset with only top 5 movies, things like Easter, birthday, etc.  My transition for each button is a slate (for lack of a better word) which says exactly what it is and when it happened, before each movie plays.

  After I had set everything up, I realized that I didn't have an opportunity to "play all" which would include these slates.  A simple solution, make a 'play together' button that links to a timeline that has everything in it - slate, then the movie, then slate, the next movie and so on.  (When I say movie - they are all .mov files rendered from After Effects, even the slates)

  My transcoding settings are NTSC DV high quality 7 MB VBR 2 pass and the "highest quality" is checked.

  When I run the "check disk" all right.  Listen to samples of the disc, all right.

  Build disk: transcoding hours then the error: data too high to * timecode * REF = KApgc.

  When this film is in itself with a click of a button, it is fine.  It is only in the scenario 'play together' that it produces the error.

  If the flow rate is not too high in one place, why is it too high in another?  It's the same thing, just a longer timetable.

  Help, please!

  Thank you.

  Only a calendar.  But it's just a few clicks away...

  -Jeff

• Error SSL on all Web sites. At clearing roaming/mozilla, deleted all files.

  Hello!

  I've been clearing firefox to my system to reinstall from scratch. I went into %APPDATA%\microsoft\windows\sendto and deleted the folder of Mozilla completely. Now, when I reinstall firefox, it won't even let my my account sync - everything appears as untrusted SSL with the error code: sec_error_unknown_issuer. Can someone help me please?

  Please try to add an exception on the bottom of the error page and inspect the certificate (see the attached screenshot for instructions):

  • What information about the issuer of the certificate contain?

• Error SSL in Thunderbird 31.0

  After Thunderbird now upgrade to 31.0, it sopped working with Dovecot altogether. He cannot use TLS connection more (it worked well before 31.0).

  Registration of IMAP server log file:

  23 Jul 11:24 dovecot mailserver: imap-connection: disconnected (no authentication attempts): rip = 10.y.y.y, lip = 10.x.x.x, TLS: SSL_read() failed: error: 14094412:SSL routines: SSL3_READ_BYTES:sslv3 wrong certificate alert: alert number SSL 42

  IMAP server root certificate use this generated for the intranet. All other certificates, including one used by the mail server, refer to this CA.

  Other services work very well with this configuration, except 31.0 Thunderbird. I had to disable SSL/TLS for her altogether, since the Thunderbird wait still in the phase of "Reception of... mail server configuration. ».

  No other configuration change. Firewall is not blocking communication. I would appreciate any reasonable pieces of advice, except the demotion to farm to 31.0 version, which did not result in this error.

  I also have this problem. Everything that used to work, then the same problem after upgrade to 31.0.

  And I also tried to delete and then re - import my self-signed CA certificate, it did not work.

  External inspection is: delete the self-signed CA certificate and accept the certificate of the server as exceptions. Or manually add server certificates to preference = > view certificates (Certificate Manager) = > servers

  Although he works at the moment, I wish that the bug will be corrected as soon as possible.

• Error SSL - HP Envy Windows 8.1

  I have a craving for M6 has recently updated to Windows 8.1. I noticed an error in the system log.

  The service finished unexpectedly HP attached to the remote Service. He did this 12454 times. The following corrective action will be performed in 5000 milliseconds: restart the service. «There is a cycle of warnings: "SSL certificate settings deleted for the endpoint: 0.0.0.0:53000.» «followed of "settings of SSL certificate created by a process admin for endpoint: 0.0.0.0:53000.» »

  Th App log lists a corresponding error:

  Application: HPConnectedRemoteService.exe

  Version of the Framework: v4.0.30319

  Description: The process was completed due to an unhandled exception.

  Exception details: System.InvalidOperationException

  Battery:

  at System.ServiceModel.Security.SecurityUtils.GetCertificateFromStoreCore (System.Security.Cryptography.X509Certificates.StoreName, System.Security.Cryptography.X509Certificates.StoreLocation, System.Security.Cryptography.X509Certificates.X509FindType, System.Object, System.ServiceModel.EndpointAddress, Boolean)

  at System.ServiceModel.Security.X509CertificateRecipientServiceCredential.SetCertificate (System.Security.Cryptography.X509Certificates.StoreLocation, System.Security.Cryptography.X509Certificates.StoreName, System.Security.Cryptography.X509Certificates.X509FindType, System.Object)

  at SwitchBoard.Utils.WCFServiceHostUtil.setupService (System.Object, System.Type, Int32, Boolean)

  at SwitchBoard.SwitchBoardService.RunService)

  at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)

  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)

  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)

  at System.Threading.ThreadHelper.ThreadStart)

  Any ideas on how I can fix the SSL for the HP service attached to the remote Service for Windows 8.1 other that restore the 8.0 Windows build?

  Hi ChrisP227,
  
  Welcome to the HP Forums!
  
  I wish I could help you with this problem. I need to confirm some information with you. You use the Remote connected HP? Have you been able to use the application previously on Windows 8? I would also try to reinstall the original version of the HP connected remote service. I've included the document 'using HP Support Assistant (Windows 8)'.
  
  Waiting for the answer.

• Considerations of sample calendar high rates (~1MS/s)

  Hi all

  My experience with Labview is quite limited, and so far I have mostly editing and debugging code which was bequeathed to me. I use USB DAQ to taste to 10 samples/second card and were not too concerned with the precise timing. I am interested in a new application of hardware and software of NOR and identified the USB-6343 map like the one to use (900 ksps / s 500kS/s and input, output). The plan is to generate an accurate output signal (amplitude and timing accuracy) which is a bit facings on the input signal. I don't plan to write the log data to a file at that rate, just to capture, process and output.

  It is relatively simple to be sampled and transmission of analog signals at these high frequencies of sampling? Currently I use just loops timed precisely to the millisecond, but that would require a precision microsecond timing. Is this something that is pretty standard to achieve or are these frequencies of sampling carried out a totally different way? Can anyone provide links to point me in the right dirrection?

  I'm sorry if this question has already been asked, but I hope that it is generic enough to not be a burden. It is a project that I take in my spare time, so I am just in the things of plan which includes determine how difficult side things software is going to be.

  Thank you.

  -A

  The acquisition DAQ clocks will give you the best time you can get. If recover you the data in the form of wave, t0 represents the start time and dt, the time interval between samples. If you've read continuously, all samples of data are synchronized compared to t0. The accuracy of dt is equal to the precision of the oscillator of time base on the DAQ hardware, usually +/-100 ppm.

  I don't remember the clock on the USB-6343 frequency, but many devices use 80 MHz. You won't get exactly 900 kHz to 80 MHz source, because this isn't a full report. 80 MHz / 900 kHz = 88.888...

  The use of millisecond clock is called avoiding the and is fast enough, nor free from jitter to do something like what you have in mind.

  Lynn

• Counters of artifacts of high rates of decimation filtering

  Hello

  I have problems with a report filter high decimation of artifacts in my data.

  I use Digital Filter Design NStage MRate filter Design VI to create you a filter step achieve a ratio of decimation of 2000. The first step is a CIC. Both are the TREE. The decimation ratio first step is 500. The other two are 2. My incoming data rate is between 1 and 10 MECH. / s.

  I'm acquiring a few seconds of data in blocks 200 ksps, and I'm filtering their block by block. I get artifacts at the borders between the blocks, as described below in two different zoom levels:

  

  

  When you implement this filter, get the best results using the MRate Nstage DFD filtering to block VI with the symmetrical extension type. I think that it is supposed to avoid artifacts at the extremes of field.

  My application is lower. Another loop acquires the data blocks, and stores them in the queue. This loop treats each data block. The reason for the inside of the loop is because data are acquired from two channels simultaneously, make the waveform output a table 2 x 200000. The vi 'IQ Mix' is a mixture a wave of frequency equivalent with the data to convert it to focus on the DC I and Q signals.

  

  Anyone who deals with this problem before? It strengthens with the highest ratio of decimation and lower bandwidth.

  Cody,

  Thanks for the offer, but I think that I traced this problem down.

  Number 1 has been that if I want to deal with continuous data, my mix waves must be continuous. I mixed a same wave with each block. I did the phase of my wave continuous mixing from block to block, and which removed a lot of artifacts.

  Number 2 was that I need to use the right filter treatment VI. Above, I use the VI for one-piece, non-continuous treatment.

  Number 3 was when using the continuous processing VI, I need to make sure you use a separate VI for each channel instance, I want to deal with. This means that I can't use a loop for looping through the channels. A non-parallelisee loop for use the same instance for all iterations. Paralleled A for loop is not compatible with that iteration uses what instance.

  I'm not completely out of the woods yet, however. I always have problems with the first block of data, that I proceeded. I think it's a quite different problem for a separate thread, though.

• Error: SSL handshake failure

  Error: Failed to transfer SSL, what is wrong

  Here is the code:

  const QUrl url ("http://xxxxxx.com");

  QNetworkRequest request (url);

  If (AppSettings::isUsingHttps()) {}
  request.setUrl (QUrl ("https://xxxxxxxx.com"));

  Config QSslConfiguration = request.sslConfiguration ();
  config.setPeerVerifyMode (QSslSocket::VerifyNone);
  config.setProtocol (QSsl::TlsV1);
  request.setSslConfiguration (config);
  }

  Answer QNetworkReply * = m_networkAccessManager-> get (request);
  bool ok = connect (response, SIGNAL (finished (()), this, SLOT (onGetReply ()));
  Q_ASSERT (OK);
  Q_UNUSED (OK);

  Benecore wrote:

  Make it easy

  QNetworkReply *reply = m_networkAccessManager->get(request);
  reply->ignoreSslErrors();
  

  I wouldn't have to follow this 'advice', with code like this, there is no reason to use https at all.

  You can call ignoreSslErrors with a QSslError QList of objects.

  Unfortunately, you cannot use the certificate store of the systems (which is really stupid), so you manage the import of the (String) server certificate yourself.

  If you have the cert that you create the list of the QSslErrors with the certificate, which go to method to ignore it.

• Error SSL blackBerry Smartphones when redirect to HTTPS

  We have the new Stroms in home and users are complaing that HTTPS login screens can access.  They were able to get on the site on their 8830's

  Errors;

  -The server returned the following error: "access denied: insecure SSL request.

  -Unable to connect using the current security settings. Please contact your service provider

  -Vous MDS has been configured to reject the SSL request on servers have certificates that are not approved or has expired.

  I tried to solve this problem as follows;

  -Options / Security Options / TLS

  -Changed 'Allow the HTTPS redirects' = YES (did not work)

  -changed 'Proxy' in 'Pocket' (didn't work but I got a different error message)

  Selected server returned an error during attempthing to fill ask you.

  Anyone have any suggestions on how to fix this?  Or is it a setting on the BES?

  Thank you

  I found the problem.

  The last adjustment was inside the browser.

  When in the browser select Options / General / default browser has been configured for Blackberry

  * I changed "Internet browser" and it worked.

• Error SSL using the neutrons API and CLI directly on controller nodes

  VIO vSphere 6.0 + 1.0 + NSX

  I am trying to execute the following code segment:

  credentials of 139 = get_credentials()

  Neutron 140 = customer. Customer ('2.0',

  141 username = credentials ['username'],

  142 = credentials ["password"] password,

  143 auth_url = credentials ["auth_url'],

  144 tenant_name = ['tenant_name'] credentials,

  145 endpoint_url = credentials ['url'],

  146 = ['token'] credentials token,

  147 insecurity = True)

  response of 148 = neutron.list_ports)

  When I run the Python script, it error the following:

  Traceback (most recent call changed):

  File "getMACAddr.py", line 148, < module >

  response = neutron.list_ports)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 111, in with_params

  RET = self.function (instance, * args, * kwargs)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 306, in list_ports

  * _params)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1250, in the list

  for r in self._pagination (collection, path, * params):

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1263, in _pagination

  RES = self.get (path, params = params)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1236, in get

  headers = headers, params = params)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1221, in retry_request

  headers = headers, params = params)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/v2_0/client.py", line 1156, in do_request

  RESP, replybody = self.httpclient.do_request (action, method, body = body)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/client.py", line 192, in do_request

  * kwargs)

  File "/ usr/lib/python2.7/dist-packages/neutronclient/client.py", line 148, in _cs_request

  throw exceptions. SslCertificateValidationError (reason = e)

  neutronclient.common.exceptions.SslCertificateValidationError: SSL certificate validation failed: [Errno-1] _ssl.c:510: error: 140770 CF: protocol SSL routines: SSL23_GET_SERVER_HELLO:unknown

  The /var/log/neutron/server.log file has the following corresponding entry for when the script tries to establish the connection:

  2015-04-11 07:17:31.941 2096 INFO neutron.wsgi [---] (2096) accepted ('10.27.16.164', 34495)

  When I run the CLI from the same controller node, I get the error with or without the - indicator of insecurity:

  ports of neutron root@controller02:/tmp#-Liste

  SSL certificate validation failed: [Errno-1] _ssl.c:510: error: 140770 CF: protocol SSL routines: SSL23_GET_SERVER_HELLO:unknown

  root@controller02:/tmp# neutron - insecure port-list

  SSL certificate validation failed: [Errno-1] _ssl.c:510: error: 140770 CF: protocol SSL routines: SSL23_GET_SERVER_HELLO:unknown

  If I run my Macbook Pro local neutrons CLI command, it works fine. This leads me to believe that it is a communication error when the controller node tries to talk to himself. I tried setting the OS_AUTH_URL and the OS_URL both the localhost IP address and address IP 10 - network - both result in the same error.

  Any ideas?

  --

  Chris

  It seems that the SSL error was caused because I connect to the OS_URL for neutrons on SSL - which is what access security page of the & showed that the correct URL in the Horizon. By changing the OS_URL to use the HTTP protocol, it began to work.