A general error occurred. Found dangling error SSL

Similar Questions

• FAILED: A general error occurred: poweron vm has no

  Hello

  I am trying to create a virtual machine from a physical server fails at 1% compared to VMware vCenter Converter Standalone client with the error:

  FAILED: A general error occurred: poweron vm has no

  Vmware-converter-server-1 log contains the following (lines last 30 or more) below.

  I found a few topics on this error, but they do not work, such as assigning a static IP address above using DHCP.

  Environment:
  VMware Server - ESXi 4.1
  Physical machine - RHEL 5.5
  VMware vCenter Converter Standalone client, version 5.0.0 Build-470252

  Any help is greatly appreciated.

  JOURNAL:

  2012 03-20 T 13: 24:20.570 - 04:00 [info 02452 "Default"] connection to the host on port 443 usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.570 - 04:00 [info 02452 "Default"] at localVersion is: vim.version.version7
  2012 03-20 T 13: 24:20.616 - 04:00 [info 02452 "Default"] remote version is: vim.version.version6
  2012 03-20 T 13: 24:20.632 - 04:00 [info 02452 "Default"] root user authentication
  2012 03-20 T 13: 24:20.648 - 04:00 [info 02452 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2012 03-20 T 13: 24:20.663 - 04:00 [info 02452 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.710 - 04:00 [info 02452 ' vmomi.soapStub [57]'] adapter heel of reset for Server TCP:usmar - bldvmsvr02:443: closed
  2012 03-20 T 13: 24:20.710 - 04:00 [info 02452 "Default"] created a new element of Scheduler with id = '12', firstTimeToRun = '2012-03-20 13:24:20.570', source ' ', targetRPOInMinutes = '0 '. -__thiscall Converter::Server:Scheduler:SchedulerItemImpl: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/schedulerItemImpl.cpp:87")
  2012 03-20 T 13: 24:20.710 - Planner element 04:00 [info 02452 "Default"] with id = '12' created - __thiscall int Converter::Server:Scheduler: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/priorityQScheduler.cpp:49")
  2012 03-20 T 13: 24:20.710 - 04:00 [02464 "Default" info] point 12 hourly Planner to run at time = 13:24:20.710 2012-03-20. -Sub __thiscall Converter::Server:Scheduler:SimpleScheduler:Run (void) ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/simpleScheduler.cpp:109")
  2012 03-20 T 13: 24:20.741 - 04:00 [info 02484 "Default"] connection to the host on port 443 usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.741 - 04:00 [info 02484 "Default"] at localVersion is: vim.version.version7
  2012 03-20 T 13: 24:20.788 - 04:00 [info 02484 "Default"] remote version is: vim.version.version6
  2012 03-20 T 13: 24:20.788 - 04:00 [info 02484 "Default"] root user authentication
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ComputeResource for vim. HostSystem: ha-host is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ResourcePool to vim.ComputeResource:ha - computer-res is vim. ResourcePool: ha-root-pool
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 'Default'] data center for vim.ComputeResource:ha - computer-res is vim. Datacenter: ha-datacenter
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 'Default'] folder root VM vim. Datacenter: ha-datacenter is vim. File: vm-folder-ha
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 "Default"] reuse existing connection of VIM to usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.866 - 04:00 [info 02484 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2012 03-20 T 13: 24:20.866 - 04:00 [info 02484 ' vmomi.soapStub [58]'] adapter heel of reset for Server TCP:usmar - bldvmsvr02:443: closed
  2012 03-20 T 13: 24:20.913 - 04:00 [00360 info 'Default'] [task, 338] [task-12] - BEGIN - convert
  2012 03-20 T 13: 24:20.929 - 04:00 [00360 "Default" error] Found dangling SSL error: [0] error:00000001:lib (0): func (0): reason (1)
  2012 03-20 T 13: 24:20.945 - 04:00 [info 02484 "Default"] Started task 'task-12' for job = ' job-12 ", item = '12' - __thiscall Sub Converter::Server:Job:JobProcessorImpl:StartProcessingJobs (void) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:383").
  2012 03-20 T 13: 24:20.945 - 04:00 [00360 info 'Default'] [taskSpec, 467] task [12] [TaskMap] - 12:task - 23
  2012 03-20 T 13: 24:20.991 - 04:00 [01044 info "Default"] ConverterConnection: KeepAlive timer cancelled, StopKeepAlive succeeded
  2012 03-20 T 13: 24:20.991 - 04:00 [info 01044 ' vmomi.soapStub [55]'] adapter reset for server PIPE:\\.\pipe\vmware-converter-worker-soap heel: closed
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 "Default" error] [task, 350] [LRO] Unexpected Exception: vmodl.fault.SystemError
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [task, 379] [task-12] - ERROR - convert: vmodl.fault.SystemError
  -> (vmodl.fault.SystemError) {}
  -> dynamicType = < unset >
  -> faultCause = (vmodl. NULL in MethodFault),
  -> reason = 'poweron vm impossible. "
  -> msg = ""
  ->}
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 267] retrieved taskInfo for ' converter.task.Task:task - 12 "mapping to" converter.task.Task:task - 12 "."
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 307] the task with id = 'task-12' proved to be a task 'recent '.
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-12. The task is still 'young' so a bundle of newspapers going now is assigned.
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-12.
  2012 03-20 T 13: 24:28.429 - 04:00 [01036 info "Default"] passage work 0 'job-12' completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")
  2012 03-20 T 13: 24:28.444 - 04:00 [01036 info "Default"] suspended 1 elements of Planner for employment (job-12) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")
  2012 03-20 T 13: 24:28.601 - 04:00 [00360 info "Default"] ConverterConnection: KeepAlive timer cancelled, StopKeepAlive succeeded
  2012 03-20 T 13: 24:28.601 - 04:00 [info 00360 ' vmomi.soapStub [59]'] adapter reset for server PIPE:\\.\pipe\vmware-converter-worker-soap heel: closed
  2012 03-20 T 13: 24:28.601 - 04:00 [warning 00360 ' vmomi.soapStub [59]'] termination invocation: moref=vmodl.query.PropertyCollector.Filter:session[5264bd60-de17-d6f4-e798-cb998a3233ed]52f3406e-964c-dea1-c23e-6f30439c2a81 method, server=PIPE:\\.\pipe\vmware-converter-worker-soap = destroy
  2012 03-20 T 13: 25:17.849 - 04:00 [01708 info 'Default'] [diagnosticManager, 343] generate Converter.Server log bundle with no job log.
  2012 03-20 T 13: 25:17.849 - 04:00 [01708 info 'Default'] [diagnosticManager, 370] generate Converter.Server bundle of newspaper.

  "CheckLicenses: ha-license-manager doesn't have a power control.

  This clearly indicates the reason for failure are missing licenses. It may be the number of processors which is not taken in charge or any other resource, not the number of virtual machines under tension.

  Kind regards

  Plamen

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• Snapshots fail with "a general error has occurred:

  All of a sudden in the last few days, we cannot take snapshots on a handful of our VMs. trying to do so gets to about 90% and finally fails with "a general error has occurred:

  Ive done some research and every result I found that included this error had something after the "has occurred."

  Any thoughts on how to get more information on this or it can be the cause?

  Thank you!

  > Regarding CD-ROM, depending on the vSphere client, it is not currently connected:

  That's right, but it seems that there is a problem with the location of the ISO file, so please set to "Client" CD-ROM drive just for this spread as possible a problem.

  André

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• General error has occurred while trying to run the initial Setup Wizard

  Anyone have advice on the implementation of vCOPS?  I have deployed the ovf, use a Pool of IP and configure static ip addresses, I get to the login page (https://< IP > / admin) and when running the Setup Wizard initial on the front page of details of vCenter Server I get a message "General error has occurred", which does not allow me to go further.  Now, I closed the browser to try again and I get a "Virtual Appliance Repair" screen that also fails with a general error has occurred.  Can anyone help solve this?

  The vCOPS unit is version 5.0.1.0 build 677931

  vCenter is version 4.1.0 build 258902

  

  Thank you

  
  Dan

  Looks like you had a communication problem between two virtual machines.

  When you created the IP pool leave you this option disabled?  Also, you associate it with the same network that the virtual machines are connected?

• FAILED: A general error occurred: unknown exception

  Hello
  When I try to convert and join physical machine to VMware ESXi Server Infrastructure I got this error: "FAILURE: a general error occurred: unknown exception.
  There are status "Race" at the moment (but does not show percentage bar) and then "A FAILED" is displayed.
  I've added screen captures and logs as an attachment.
  Please help me

  Youe error is

  2012 04-25 T 11: 34:31.195 + 02:00 [info 01340 'Default'] [, 0] Vmount library: 2 error while opening the control device of the driver VSTOR2

  Try to uninstall and clean install the converter 5.

  If the error occurs again, check the status of the pilot VSTOR: "sc qc vstor2-mntapi10-shared '.

• NDMP server reported a general error (name not found?)

  Dear all,

  Oracle Secure Backup, I want to restore to the other way, but I got the error

  NDMP server reported a general error (name not found?)

  # State failed to 2013/09/16.15:45 - NDMP server reported a general error (name not found?) #.

  Thanks for your response

  OK, when you put it in the alternative path for restoration, you must list the name of the file too. You can see the original path on the left which includes the name of the file, so your other path should be something like ' / export/res_from_tap/thisfileisrestored.

  Thank you

  Rich

• A general error occurred: error [VdbODBCError] - 1

  Hello

  I have Virtual Cener 4.01 on windows 2008 R2 64-bit server.

  I have ESXi hosts with 4.1_update01 patch and have the free db SQL server for the VC

  I was connected to the VC and notived a server has been disconnected.

  So I tried to connect it again and I had "a general error occurred: failed to ... " Error: error[VdbODBCError] (-1) "ODBC error: (40001) - [Microsoft] [ODBC SQL ... " ERROR [42000 "

  I followed http://kb.vmware.com/kb/1003980

  Shrunked the log file and restarted the management agent but still no luck.

  The VM on the server is still online. Can someone please help. Thank you

  The log file has this

  [2011-03-02 15:42:01.247 06116 info ' vmomi.soapStub [4]' opID = 0000003D EE6B6942] Reset Adapter stub server TCP:mnisvmsrv4:443: closed
  [2011-03-02 15:42:01.247 06116 "App" opID error = 0000003D EE6B6942] An unrecoverable problem has occurred, stopping the service of VMware VirtualCenter. : Error [VdbODBCError]-(1) "ODBC error: (42000) - [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo." VPX_HOST_VM_CONFIG_OPTION'. 'PK_VPX_HOST_VM_CONFIG_OPTION' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the file group. "is returned when you run the SQL statement ' INSERT INTO VPX_HOST_VM_CONFIG_OPTION WITH (ROWLOCK) (HOST_ID, CONFIG_OPTION_VER, DATA, index_tableau, CONFIG_OPTION_DESC, CREATE_SUPPORTED_FLG, DEFAULT_CONFIG_OPTION_FLG) VALUES (?,?,?,?,?,?,?)".
  [2011-03-02 15:42:01.809 07132 info "App" opID = EE6B6942-00000046] [VpxLRO] - tâche-interne-56---vmodl.query.PropertyCollector.Filter.destroy--FA2F537F-CA34-44A4-95F8-14AAF05BB5B2(909B8829-6F75-42A7-9023-4AFA478ACDE9 BEGIN)
  [2011-03-02 15:42:01.809 07132 info "App" opID = EE6B6942-00000046] [VpxLRO] - spéciale-interne-56---vmodl.query.PropertyCollector.Filter.destroy--FA2F537F-CA34-44A4-95F8-14AAF05BB5B2(909B8829-6F75-42A7-9023-4AFA478ACDE9 FINISH)
  [2011-03-02 15:42:54.927 05640 info "App" opID = EE6B6942-00000048] [VpxLRO] - tâche-interne-57---vim.view.InventoryView.closeFolder--FA2F537F-CA34-44A4-95F8-14AAF05BB5B2(909B8829-6F75-42A7-9023-4AFA478ACDE9 BEGIN)
  [2011-03-02 15:42:54.927 05640 info "App" opID = EE6B6942-00000048] [VpxLRO] - spéciale-interne-57---vim.view.InventoryView.closeFolder--FA2F537F-CA34-44A4-95F8-14AAF05BB5B2(909B8829-6F75-42A7-9023-4AFA478ACDE9 FINISH)
  [2011-03-02 15:42:58.375 06116 info "App" opID = 0000003D EE6B6942] Force the closure of VMware VirtualCenter now

  Hello..

  Don't know the exact reason of why you get this error, but you try to manage a host ESXi 4.1 Update 1 with vCenter 4.0.x?

  If so, this is not supported... Page 3 here http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf

  / Rubeck

• Error: A general error occurred: failure

  Hello

  Get an error on one of my guests in my cluster: "impossible to apply the parameters of resource of DRS to xxxxx host cluster (reason: a general error occurred: failure).

  First of all, I don't know what this refers to? Secondly, where should I look at to fix? When I check the tab tasks, it refers to a virtual machine that I have difficulties to the cancellation of the registration. This is whence the error? If so, how can I delete it?

  Thank you.

  You can enable SSH

  http://www.VM-help.com/esx40i/ESXi_enable_SSH.php

• Impossible to apply settings of resource of DRS on host (reason: a general error occurred: failure). This can drastically reduce the effectiveness of the DRS

  We have a group of 10 hosts working ok for months. Last week, we get the error

  Impossible to apply settings of resource of DRS on host (reason: a general error occurred: failure). This can drastically reduce the effectiveness of the DRS

  on one of the hosts.

  looking to restart the hosts but not sure this could cure the problem.

  Have you tried the steps in this KB?

  Application of parameters of DRS to an ESX host generates an error (1004667)

• A computer record virtual using the VI Toolkit gets "a general error has occurred: invalid error" error.

  Hello

  I am a relative to the VI Toolkit novice so apologies if I ask you something ridiculous.

  I am trying to save a virtual machine using the VI Toolkit, but get the error "a general error has occurred: failure of ' (seen in the VI Client) when the virtual machine must be connected to the host. I use Registervm_task to perform this task.

  Here is the code:

  -

  ---

  to connect-VIServer MyVIServer

  http://Reflection.Assembly: LoadWithPartialName ("vmware.vim")

  $clus_name = "MY_CLUSTER".

  $folder_name = "DR".

  $esxcsv = import-csv «.\esx-hosts.csv.

  $vmcsv = import-csv «.\vm-list.csv.

  $dr_folder = get-view-file-filter viewtype @{"name" = $folder_name}

  $clus = get-view - viewtype ClusterComputeResource-filter @{"name" = $clus_name}

  foreach ($vm to $vmcsv)

  {

  + $dr_folder. RegisterVM_task($vm.) PATH, $vm. VM, $false, $clus. ResourcePool, $null) +.

  }

  -

  ---

  If I look in the 'tasks and events' VI, I see the following events:

  'Machine virtual myvm is connected' and then a few seconds later "Creating myserver on the host myhost.myfqdn.net in my data center"

  I can join the virtual machine manually via the VI Client and confirmed the account that I'm using has permissions.

  Any ideas or suggestions would be welcome.

  Kind regards

  Jamie.

  If the problem persists, could perhaps include a sample of the content of the two CSV files?

• How can I fix the error SSL 61 (Linux OS)

  Whenever I try to connect to my customer's internal Web site light Linux OS I get the error SSL 61. Firefox is the only browser on the workstation. There is no connection problems of Non-Linux systems on any browser, including Firefox.

  Below error:
  SSL error
  Contact your Helpdesk with the following information:
  You chose not to approve "Go Daddy Secure
  Authority - G2 of certification', the issuer of the server
  security certificate (SSL 61 error).

  How can I fix this error? I tried to install the cert manually at the client.

  COR - el: this does not resolve the question for SHA1 certs.

  I added the certificate to the Citrix DB. I finally found the problem after researching on Citrix forums and other various sites.

  This question is the cert itself, we bought a cert and use SHA2, however the Citrix Receiver of Linux does not support at this stage the SHA2.

  So either the only resolution retype the cert to use SHA1 or wait for an update from Citrix.

  Thank you both for your time.

  c