Holding an effect until the display

Similar Questions

• Camera LR Android disappears when the display size is set to small

  Hi all

  Apparently, there is a bug in Android Mobile with Lightroom. 7 Android there is a parameter called size display, under the display settings panel, which effectively defines the display scaling. If the value is 'Small' on my Nexus 6 p disappears the camera feature of Lightroom Mobile.  It comes back as soon as I put the default display size.

  See you soon

  Tom

  Hi Tom,

  Android is still not official for all devices, and we have not tested extensively on our applications.

  Personally, I don't have a handy device with me so will be updating once I've tested the same Nougat.

  Kind regards

  Assani

• my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  Hi Kdooley,

  Are a. When you facing this problem?

  B. using a laptop or a desktop computer?

  C. is - what happens with specific applications?

  D. don't you plug a different keyboard to check?

  Method 1

  I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2

  Method 2

  Try to change the rate of repeat on the keyboard and check if it helps.

  1. Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
  2. Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  If the problem persists, then it might be a problem with the keyboard itself.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Possible to display an icon from loading until the page load completely?

  4.2.1

  THM:2

  Hello world

  I have an application with two expensive queries that takes a while to load (on the page sent). On the page there is a selection list filter. When the user changes, the page is sent and two classic run reports based on this filter. I have a dynamic action (load which) goes off on the amendment of the list and then submits the page. However, the loading icon is visible until the moment where that page is submitted. Once the page is sent, then also the reports takes some time to display all of the records. Is there a way to display some sort of an icon of loading time of the page load completely? OR this is not possible.

  Thank you!

  Ryan

  Hi Ryan,

  Please check the old thread with the same question

  PROGRESS BAR WHILE LOADING A PAGE

  Kind regards

  Jitendra

• In After Effects when I use the Color Finesse 3, a grid appears in the display. How to disable that?

  When I click the button, and then synthesis, then ITS Color Finesse 3 creative cloud, a grid appears on the video in the display window, and I don't know a how to take that off?

  Color THE 3 Finesse provided with After Effects and is automatically installed during the After Effects is installed. The only reason to upgrade to the paid version if you want to use Color Finesse in Premiere Pro, as well as in After Effects.

  Because this is a college computer, you have the option to install/uninstall software? Many universities to lock down computers in order to limit this access. You will need full access including an admin password, to use the following steps. If you are not allowed access, you can pass the following to whoever does the computer management.

  To remove the trial version, delete the entire folder "Synthetic aperture" found in:

  / Library/Application Support/Adobe/Common/Plug-ins/7.0/MediaCore

  (Note that it is the library folder at the base of your boot drive, not that of your home folder).

  Then, re-enable the embedded Color Finesse version by going to the following folder:

  / Applications/Adobe/Adobe After Effects CC/Support Files/Plug-ins/effects/Synthetic Aperture

  Now, in this "Synthetic aperture" folder, you will find a plug-in with parentheses around the name:

  (Color Finesse 3 AE64)

  Remove the parentheses by the name of file for AE go to him. Not NOT remove parentheses from the folder "(Support CF3)" or AE will launch very, very slowly, and Color Finesse is not working properly. "

  "Finally, in the"(Support CF3) folder ", find it" (Color Finesse 3 IU) "application and remove the brackets.

  Launch of EI, apply Color Finesse to a layer, enter a name, and you should be good to go without grid lines.

  Bob Currier

  Synthesis

• Color or effects application Alpha Object order on the display

  Hello world

  CS5 Flash AS3

  I have a button that I am the creation of 2 clips in the library. One is the button body (converted to MC form).

  The 2nd is a series of button logo to PNG for a change of State of button, Visual additional.

  I add the MC logo with addChild to the body of the button. Then I add the body of the button to the display/scene container.

  Everything is set correctly.

  If I add alpha / transform the color on the body of the button, it goes to the top - covering the button logo.

  Do not apply color or alpha to the regulator button and apply a color or an alpha for the logo of the button has no effect (poster correctly).

  Any ideas?

  Thank you

  Jim

  It is not clear to me what you're trying to do.  If you place the logo as a child of the body, then whatever you do to the body will be afftect the logo.  If you want to only affect the body and not the logos, so you need to add two objects as children separated a third objection, which acts as the container for the two.  You can separately affect changes to the body.

• Last image remains in display panal until the next frame starts.

  For some reason any every time I cut a clip and follow it with an empty space of the last frame of the clip remains in the panal display, even if the clip is finished. This isn't a problem when I go to the clip, empty space is represented until the next clip begins. It is in audio synchronization for the right frame up a nightmare. Any suggestions?

  Welcome to the forum.

  Rather than leave a gap in the video, what happens if you insert black Video (created with the new icon in the project Panel)?

  Note that deviations may cause all sorts of issues later, while there are not recommended.

  Good luck

  Hunt

• Web pages display lingers when hidden - not hidden until the screen interacted with

  Just had the time to find the solution to this problem, that I experienced. Impossible to find a solution from the forums search.

  I used a QNXStageWebView and I wanted to hide when the user switches to another view of the application. I tried to set the scene on a null value, the zOrder-1 and the visible to false. None worked without a problem, as the webView wouldn't be hidden until the user attempted to interact with the latter, when the UI would suddenly be cool and hide the persistent webView.

  See below for the solution.

  The solution: set the viewport to null, in addition to affecting the zOrder-1, when you want to hide the QNXStageWebView.

  webView:QNXStageWebView = new QNXStageWebView();

  webView.viewPort = null;

  webView.zOrder = -1;

• Delay in the display of the modeless dialog box

  I use a modeless dialog box to display "Please wait...". "users in an operation that lasts from 3 to 8 seconds.

  The dialog box is called by the Menuitem run() method. Once the dialog box appears, the task begins

  running in the background. A loop then periodically checks whether the task is complete. When the task

  MenuItem _taskItem = new MenuItem("Task", 20, 30)
  {
     public void run(){
      try {
              Dialog progressDialog = new Dialog( "Please wait...",
              null,null,0,Bitmap.getPredefinedBitmap(Bitmap.HOURGLASS),
              Dialog.GLOBAL_STATUS);
  
          progressDialog.show();
  
          Task task = new Task();
          task.doTask();
  
          for(int i=0; i<10; i++)
          {
              if(task.isComplete())
              {
                  break;
              }
  
              Thread.sleep(1000);
          }
  
          progressDialog.close();
      }
      catch(IOException e){
      ...
      }
     }
  }
  
  addMenuItem(_taskItem);
  

  is completed, the dialog box is closed. I have attached a code snippet that illustrates the basic approach.

  The main problem with this approach is that the modeless dialog box is not displayed immediately after

  progressDialog.show () is called. It seems to be queued for later. It is generally not displayed until after

  the task is complete, which is far too late an effective busy indicator.

  The only way I was able to display the dialog box immediately is by invoking it as a modal dialog box

  (that is, progressDialog.doModal ()). But it will not work because a modal dialog box will prevent the application of

  execution of the task. In my view, that it must be modeless.

  The 3.4.0 API spec refers to a dialogue show() method that accepts an arg, Show (int priority) priority. The spec

  said little about what values can be, and the way in which priority is actually used. Does anyone have experience with the

  setting priorities? This will help display a modeless dialog immediately?

  Someone aware of other methods to force the display of a dialog box - is there a way to force the processing of

  all events pending? (I tried UiApplication.updateDisplay (), without success).

  Thank you!

  So that your dialog box display, your task must be in a separate thread.

  What you do in the code snippet you provided actually holds the wire of the event and thus prevent this thread to display the dialog box.

• Re: x 505-"turn off the display" does not properly

  To make a long story short, I had a load of problems with my Toshiba Qosmio X 505. I talked to tech support and they had me completely clear the computer and reinstall the OS. Everything has been fine for days until today!

  For some reason any whenever my screen turns off (for energy saving), I can't get my computer to respond. I don't know if he's asleep, going into hibernation mode, or even the difference between one of these things, but when I press the buttons, move the mouse/Touchpad, try multimedia keys, the power button, nothing makes my computer come back. I have to hold the power button / stop and completely restard come back again the computer.

  Why is this happening? It worked great for everyday, but I think it has something to do with the NVIDIA driver update I downloaded. It is the main change I have made to the computer yesterday and now it seems to do. Does anyone have recommendations? How can I make my computer stop doing that? I have all the options of my black screen off for now, but that does not seem a good solution for this problem that he used to work properly.

  Hey,.

  Akuma is right, you should only use the display drivers provided by Toshiba and not nVidia. The nVidia drivers are not pre-tested and that's the reason why they can cause such problems. Also they don t have an overheating protection, installation happens on your own risk.

  If you need to test it with the drivers from the official website of Toshiba. Prior to installation, remove the current display driver, and then restart the computer. Then you can begin with the installation of Toshiba display drivers.

  In the worst case it of necessary to reinstall the whole system again, but before that, you try a system restore to an earlier point.

• MEMORY SYSTEM classic blackBerry: Blackberry classic 'System' memory in environments; Storage and just access grows until the phone freezes

  Ive had BB for over 10 years.

  I'm recently on the new classic BB and had two combined in one week.  Both display the same problem - the system memory DEVELOPS itself...  Finally, when the combined system, applications and user files hits like 15 gb +, the phone crashes, stops working, wont work correctly or for example, open a text. This, coupled with the notifications of memory almost full system, remember to remove etc...

  I have just 8 applications user, no responsible side. All applications (default Inc. those preinstalled I guess) total 730 mb, user files 38 MB.

  The top off button seems to erase the memory of the system growing (but age), reducing back to between 2.8 and 3.5 GB, from where it slides up again...

  I saw exactly the same problem reported in other threads and others, to my knowledge, none have found a cure, and there were a variety of possible reasons for questionable apps never put an end to calendars or sync for always emails...  I have a timing of 30 days and the handset prev I put this at 14, just in case, without success.  It seems that much of the problem gave up BB...

  Ive spent hours on the phone with the help of BB, hours, days sat trying to sort with emails for the BB and it seems some suggestions are not better than ive already read in the many sons and ive visited forums.  It's like they know the problem but don't have any ideas...

  Anyone who has met or experienced, what if a cure has been found?

  Assuming that many do not have the problem, devrais I press on the other hand, third handset?   For the record, the current had no possible cross contamination, no switch of the device or to save plugs on the other, or the BB link, all started fresh and kept away etc. previous backup...

  Thank you.

  If you can, please answer the questions numbered above. Knowing that the information will be, otherwise I would not have asked

  Also, this: "by pressing the button of the top fopr the 3 seconds to turn off and then after a bit, by restarting using the same button" done little other than to turn the unit off and on again.

  Do a restart appropriate in this way:
  Reboot: The unit powered on, press in and hold the power button on top about 20-30 seconds, ignore the 3-2-1 timer and hold the button until the screen goes black and you see the red LED.
  or
  Restart: With the unit on, keys on the volume of the edge side, press and hold both the up and down for about 20 seconds volume keys, ignoring the initial message of screenshot... the screen go black, reboot.

  Try a reboot this way and let us know in a day or so how this growth of system memory only.

• U3014 + PS3. Problem with the display resolution?

  Hello!

  PS3 cannot expose to a resolution of the screen for Dell U3014. I use the HDMI-HDMI cable. In the attempt of a choice display resolution in the settings of the PS3 when it test the monitor may not issue image. This means that an installer of the screen may not be complete. Now the installation of the screen program gives 576 p. As you understand, it is impossible to play on it. Please help with a problem.

  Thank you.

  Niko7,

  The U3014 HDMI port can do 1920 x 1080 (1080 p).
  * With the monitor and the PS3 on and using a HDMI to HDMI (not a DVI to HDMI) cable right, turn off the PS3 via the power switch on the back and then turn back with this same switch
  * Press and hold the power button on the front of the PS3 until you hear 2 beeps. Once it turns on, the screen should display a message something like: "an HDMI cable has been detected, you want to set up?
  * Then go here to set the video output to your TV/monitor
  http://manuals.PlayStation.NET/document/en/PS3/current/settings/videooutput.html
  * When you go through Setup for HDMI setting, you will need to check what your monitor video output modes supported (480i/480 p/576i/576 p/720 p/1080i/1080 p)
  * After you go through the intial setting HDMI menu and displays your PS3 via HDMI cable, on the main menu of the PS3, go to settings and then scroll the display settings. In display settings, put the full range RGB (HDMI) to full and put Y Pb/Cb Pr/Cr super-white (HDMI) on we

• How do you get managers and the effects to the show

  I just opened PE (OS X 10.5.8) on a trail basis.

  But it seems not to have executives who should appear in the menu content.

  I imported an image, and the image shows as expected.

  Then I click on windows > content and the correct palette is displayed, but there is nothing in the range of frames. None of the other pallets of this group seems to have any content either.

  Y at - it any action you have to take to get the images to appear?

  Any suggestions as to what could be causing the problem?

  Thank you

  Go to library > application support > adobe > photoshop elements > 9.0 > local > en_US (or location) and delete the mediaDatabase.db3. The next time you start PES, wait until the effect controls panel is filled before you try to use the program.

  Note that this is the library at the top level of your hard drive, no system > library or your username > library.