Home office records

Similar Questions

• If I sync my home office and my desk, I will lose the bookmarks of one or all the other supplement?

  I hope to have a single list of bookmarks that are the result of a combination of ALL my devices (phone, Tablet, office and Home Office work). That's how sync is scheduled to work? All devices 'equal' to another, or a master-slave scenario?

  Yes, if you synchronize both your home and work desk the bookmarks from the registration desk will be combined with those of the Office of work and vice versa.

• Silverlight will not install on my computer. I get an error code 659. Silverlight has worked on computer at the same time. Vista in Home Office business management.

  Silverlight will not install on my computer.  I get an error code 659.  Silverlight has worked on computer at the same time.  Vista in Home Office business management.  Can someone help me with this issue?  I installed Vista service pack 2.

  johncoxcpa,
  Well looking at the log you've posted, I came across this article:
  MSI (s) (2 c: D4) [22:29:29:073]: sequence number number for this installation system restore.
  This installation is forbidden by system policy. Contact your system administrator.
  c:\c17e5b6672c37d9f685b\Silverlight.msi

  So it seems that if your system has a software restriction policy installs.  You need to contact your IT Department. to learn about the changes to the policy will be to install Silverlight.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RVL200 ssl vpn, I'm not able to access resources network or ping of the Home Office

  I had installed a Linksys router using port forwarding to allow remote access to the server desktop remotely. I had some problems with it and I've always wanted a vpn connection to the office, but I could not ' operate. So I bought the RVL200 after that I read on it and ssl vpn.

  I have the router installed right after the modem cable to the office. I'm able to hit the external ip address of the House. I have the router to access the Server Active directory for connections. The connection works fine, all the different active directory accounts have access to the vpn through this. I am also able to make administration of the router remotely. I am able to connect to the vpn and get connected virtual passage. The icon in the systray says that everything is good. With all this, I'm not able to ping every address on the remote network. I can't reach all the network resources as \\pdrserver\irms or my print server ip address. I can't use network XP Favorites to find anything on the remote network.

  Someone has an idea what I am doing wrong? I appreciate the help.

  I thought about it. I was using the same IP for the home and office. It was confusing. I changed my IP to another system. Home office and now 12.4.4.X now 11.4.4.X. After that, everything worked as it should. Readers without mapped problem, ping remote computers. I could access the remote print servers. Works well. So make sure that you do not use the same IP addresses on both sides of the VPN.

• I want to load the home office xP on a vista computer

  I bought a portable Toshiba which has Vista on it.  My Top Desk has Home Office XP, which has been downloaded to a Compaq who works on Vista.  I was told that I can not load my XP Home Office on my Lap Top because it has been implemented for a Dell originally.  How could he be responsible for my Compaq and not allowed to be loaded to my Toshiba?

  If OfficeXP (he not there no home OfficeXP BTW) was provided by your origonal PC manufacturer when you purchased the PC then its oem version and is only permitted for the PC and not may be transferred to any other PC.

  If however OfficeXP is a commercial version then you can install it on your new PC, having first uninstall any trial version of Office.
  OfficeXP is however not fully compatible with Vista or Wiin7 - the main problems with Outlook

• I work in local government, the Norway and need to work on 3 different PCs - an office, a Home Office, and a few times on my laptop (to show proghress and development). Can I install all these 3 places with my team account? (I never work simultanesly)

  I work in local government, the Norway and need to work on 3 different PCs - an office, a Home Office, and a few times on my laptop (to show proghress and development). Can I install all these 3 places with my team account? (I work on one of these 3 pc simultanesly).

  Hi claire nadège,

  According to the number of licenses you have purchased under the account of the team, you can install on machines.

  Kind regards
  Rave

• Update my version of CS6 Home Office

  I have for several years been CS in my desk and my home office, but I forgot to update for CS5 to CS6 in time. I tried to use the CS6 serial number only. my desktop version, but I did not.

  Can I get a new serial No. for a CS6 version to my home office?

  If you have CS6, you are allowed to install and enabled on both machines using the same serial number.  If you are not able to get the second machine turned on by using the same serial number, you must contact Adobe support via chat and explain the problem.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• I want to install CC on 3 computers - home, office and laptop. Do I have to buy an extra subscription for it?

  I want to install CC on 3 computers - home, office and laptop. Do I have to buy an extra subscription for it?

  Hi Turbofinch,

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone.

  If you install on a third computer, you will be asked to turn off this feature on the other two computers.  You can then re-enable one of the two previous computers and use Cloud Creative apps on it.

  If you regularly need to use creative cloud on more than two computers, it would be better to buy an additional subscription.  It's the same btw licenses we have for our perpetual product.  A benefit for creative cloud on the perpetural product is that you can install on Mac and Windows with the same subscription!

  Let me know if you need more help.

  Thank you!

  Florianne

• Home office 64 bit installation problem

  I have a 64-bit computer and downloaded 64-bit desktop at home, but it won't let me make it work because I have a 32-bit version of 2010 Professional on my computer.  I can't uninstall the 32-bit professional, but it does not show to the memory

  32 and 64-bit versions of Office cannot coexist, you must first uninstall the 32-bit version.

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  If the step above does not resolve the problem, uninstall Office by removing all the registry keys for this office manually check the item below:

  Note: Read the disclaimer mentioned in this article before you perform the troubleshooting steps.

  Instead of office 12 files looking for records Office 14.

  http://support.Microsoft.com/kb/928218

  Try to reinstall Office.

• Update error code 646 and home office edition 2007

  Hello, I am unable to down load updates from my home editon of microsoft office 2007 and I get an error code 646 failed down charges are consistent with the other members on the forum, Help compalints!

  I get the same error and it took me a while to find a way to remedy.   I don't know if it works for you, but I had to go to user accounts and disable user account control.  Control of this account was preventing the update to settle.  Alternatively, you can manually install the updates if you do not want to disable user account control.

  To disable it go to start - Control Panel - user accounts.

• Transfer of two Home Office PSTN lines

  Hello

  I'm a bit confused, because I am new to this sort of thing.

  In my office, I have two PSTN lines and I would like to transfer to my house via a WiFi connection that is already established. I'm looking for the reliable solution plans. The research I've done so far, I think I need 2 FXS on the side of the House and 2-port FXO X on the side of the Office. I can install two SPA 2102 or SPA 3102 (new model) on the side of the Office and connect the two PSTN lines that I have here. I should connect to my WiFi router and configure them as two different Subscribers with two different IPs from my subnet. On my other WiFi router at home, I have to connect a LinkSys PAP2T, which has two FXS ports and taken there are two analog telephones.

  My questions are:

  1 - is the above configuration sounds right?

  2. is there something I should know about in the configuration of the devices?

  3 - is the PAP2T support two different Subscribers?

  4. will I CLI on analog lines at my home.

  5. where can I find information of such a configuration?

  Thanks in advance

  
  

• Temporary Desktp locked me out of my home office.

  About 3 days ago I have connected to my office of wives and went to connect to mine. (I have rights admn) BTU the screne told me that I me being connected to a temporary desktop computer. Having a standard desktop Compaq. And a tab of the window telling me that I need display the event log. I did and could find nothing wrong. When I start, then computer, then to my drive c, and then users... It's when I see the records office 4... One for me, my wife, my son and one for me with Temp in parenthacies. and this one has a picture of a lock on the front of it. If so, that makes sense to the reader. Have I been hacked or is - a virus?

  In any case how I remove and get back to the office of origin?

  I would really appreciate some help on this.

  Thank you

  ksix.    E-mail address is removed from the privacy *.

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Why I can't download Photoshop CC 2015.5 on my home office?

  My creative cloud app doesn't allow me to download PS CC 2015.5 on my desk at home. I have an account through the University where I teach.

  I pasted the error messages I get every time I try to download Photoshop. Adobed tells me to rename the filke and try again, but I don't know HOW to rename the file.

  ----------

  Exit code: 146

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 1 warning (s)

  FATAL: Error (Code = 146) the "MoveDirectoryCommand" command for the package: "AdobePreview1.2.0All - win64', version: 1.2.0"

  FATAL: An error has occurred in the installation of the package (name: AdobePreview1.2.0All - win64 Version: 1.2.0).) Error code: '146'

  WARN: Cannot move the directory "C:\adobeTemp\ETR7D2.tmp\1\Application\preview.generate" to "C:\Program Files\Common Files\Adobe\Plug-Ins\CC\Generator\preview20155.generate"

  -------------------------------------------------------------------------------------

  

  

  Hi Bmccoy2,

  For more information on how to solve the error Code 146 see resolve error Code 146 met by installing office creative Cloud... .

  We invite you to update this discussion if you have any questions about the steps listed in the document.

• Moved from home office computer. Try to connect to the home network. Working Group changed now it won't let me connect you to Windows. It is the search for field. What can I do now?

  My TI guy told me to do the following...

  go to my computer, and then click Properties. Then go in the name of the computer from a network to a working group. I entered the name of my working group. Then it tells me to restart so I did.

  Now when I try to get into windows that connect, when I enter the username and password he tells me to check and make sure that they are correct and check the field. It does give me an option to choose a domain.

  It's husband's computer and I need to run quickly. Any help would be appreciated.

  Note please. I am a novice user and that you will need as more detailed instructions you can give.

  Thank you

  Aimee Bushmaker

  Green Bay, WI

  BTW - Windows XP Professional is installed on the PC.

  Not good.

  When you remove a computer from a domain, and put in a workgroup, you must ensure that you have a local user account with administrative privileges created on the machine before removing the domain.  Maybe the built-in Administrator account will work, but in most domain environments, the default password [White] is replaced by a different password.  Microsoft has an article that deals with this:

  "You can not connect after you remove the computer from the domain.
    <>http://support.Microsoft.com/kb/317049 >

  Your technician COMPUTER should have known this would be a problem.  If you are a novice user and you can not access the built-in Administrator account, then your best bet to get must return to the domain and have your guys IT re - join to the domain.  Make sure you have a local user with administrative privileges created before withdrawing again to the field.

  Note that you normally will not have to remove a computer from a domain to make it work in a home-networking environment (working group).  You should be able to connect using the credentials cached [field] and your home network must always be visible to you.

  HTH,
  JW

• How can I access a computer on my network wirreless from the Home Office and see what they do?

  I just want to see what my kids on laptops out there without going on them. I just want to be able to access from the desktop home.

  Hello

  · What is the edition of windows installed?

  There is no software for Windows XP from Microsoft which can be used to monitor the action taken on another computer.

  However, there are some third party software that can help you with your needs.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

  If you use windows XP Professional, then you can try Remote Desktop connection. For more information please visit the link below:

  How to use the Windows XP Professional Remote Desktop feature: http://support.microsoft.com/kb/315328