Home phone does not receive calls since I've implemented HP 7520

Similar Questions

• updated to ios 9.3 and now my phone will not receive calls?

  I have an iPhone from Verizon 6s.  I have updated to iOS 9.3 last night successfully.  Today, when someone tries to call me, my phone does not ring.  Happening in virtual machine after 4-5 rings.  My wife has the same phone and the same exact problem (it updated to iOS 9.3 as well).  Help, so I can receive calls.

  Have you checked to make sure that do not disturb is not activated in the settings? The volume is mounted? If you checked every setting and switch, try a forced reboot. No data will be affected.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• Bought a phone #, do not receive calls

  Skype on iPhone. Paid to say # and phone settings I, but incoming calls do not come! Says it goes to voice mail, but it does not sound again. I'm online, so it isn't that.

  Traveling to Europe and the aging parents need to be able to call us.

  Help!

  UPDATE: works after all. It might not work because I have several facilities-iphone, laptop and desktop. I left all connected first of all that the office and called from the fixed line home-success. Then quit that, connected to the laptop computer and called success. Then quit that and connected on phone portable-success. Be sure to check the settings for accepting calls under tools options privacy protection.

  This is not what I hoped for, is for voicemail be left when I'm offline. In other words, someone calls my phone number iphone Skype and because I am not connected to a wifi, they get the message. Leave a message has not created a voice message when I logged in.

• Smartphones bb curve 8900 blackBerry does not receive calls. Everything else works!

  Hello, just bought a 8900, after a new Reset SIM. Everything worked for about a week, now I can't receive calls. If I call my phone, I get the music while waiting for someone to answer, but the BB don't gives no indication that a call comes, no ring, no screen change, etc.. I drilled down in all profiles and checked for what is obvious. Even taken by an ATT store where they pulled the battery and reinstall the SIM card, but no change. Someone at - it suggestions? The last thing I did before that I noticed this problem is to download a ringtone via my browser and set it so that's what someone means when they call me (before i pickup.) When I call my phone, I get the Lady saying that I can listen to music while I wait for someone to answer. I can hear it even ring through the other phone between a break in music...

  This has been resolved. Had a problem with my account settings, by the Support Center of device...

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.

• SPA112 does not receive incoming calls

  This a a new SPA112 set up for RingCentral in the USA (www.ringcentral.com)

  I can make outgoing calls. I can receive incoming calls if they are for a short period after an outgoing call - I care, but after a longer period, the phone does not ring on incoming calls. If I make an outgoing call then I can receive incoming calls again for a short period. So it seems that some timeout in game. I spent hours with the support of RingCentral and they can't figure it out - they said now they give me is no longer supported. They sell the SPA122 (which is essentially the same device) so I don't see why the SAP112 will not work.

  A log file is attached. There are 3 calls, 1 call is a call that didn't go off, call 2 is a call out, call 3 is a call that rang.

  SPA112 122 using the same firmware, so has the same functionality with regard to phones. The 122 has just an extra ethernet port you can connect between your modem and your router (or computer).

  It seems that you lose your registration to their servers. I say that because there is nothing in the paper to suggest even the first call made to you. In addition, when you try to make an outgoing call, you get a "407 Proxy authentication required" back, which means their servers doesn't know who you are. Once you authenticate, the call passes by and you are registered and can receive calls, until the registration expires.

  Under the "line 1" (or 2 as the case my be), under "Proxy and registration", make sure that 'Register' is set to 'Yes'. "." If it's already like that, check the value of "record expires. This is the number of seconds between records. I have mine has 180 (3 minutes). But you can try lower values, even 30 seconds and see if it makes a difference.

• BlackBerry Smartphones phone does not ring when unknwon number calls

  Help, please. It has just starting happening.

  If a phone call is received several steps that my conatcts list, the phone does not ring.

  Any ideas anyone.

  Thanks rich.

  It may happen that the profile exception is active.

  To check this go to profiles -> Advanced -> uncheck all check user profile except fo:

• APPLE 5S PHONE DOES NOT RING ON INCOMING CALLS

  APPLE 5S PHONE DOES NOT RING ON INCOMING CALLS

  1. Have you checked to see if you have the volume mounted on the ring?
  2. Have you checked to ensure the silence on the side of the phone is not set to mute setting?
  3. Have you checked to see if you disturb not activated?

  

• my phone does not ring when there is an incoming call.

  My phone does not ring when there is an incoming call.

  Have you checked if it is on mute?

  The "secret" key is above the volume buttons on the left side of the iPhone (red = mute is enabled)

• My phone does not always sound

  MY phone does not always sound. I miss calls

  Hi Lizhel,

  If you do not hear the ring of your iPhone, it may be due to a reception of the issue called. Fortunately the article below the link Details a number of measures that can help to ensure that you are well able to receive calls on your device.

  If you can not make or receive calls on your iPhone
  https://support.Apple.com/en-us/HT204027

  Kind regards!

• URGENT blackBerry Smartphones: phone does not start after update (21/05/2009)

  As indicated in the title, my phone does not after that I updated last night. He mentioned that he will not be able to make any calls or anything for the next 2 hours, but after the time of 2 hours, it seems to fail during startup.

  At first, I thought it was battery problem that the screen is not actually light up and so I charge my phone. So I just realized even during the loading, the bright red light (LED) Dungeon blinks from time to time. I look closely at the screen and you can vaguely see the logo of loading.

  It is, he does not meet one of the buttons. None of them activate the backlight on the Dungeon of the flashing display vaguely similar to when I first pluged load.

  I suspect that's not supported properly.

  Please anyone can solve my problem as soon as possible, since one day it stopped working and already cause me trouble.

  Thank you very much

  Alfred

  Hello!

  Sorry about that... I have no direct experience with your situation and therefore has no direct information to communicate. But I remember an article that I had heard about bringing a BB masoned to life. Check it out here:

  http://adlen45.ActiveBoard.com/index.spark?forumid=123568&p=3&TopicId=18834966

  I have no idea if data are useful or not... but maybe it's a start for you.

  See you soon!

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• By pressing the home button does not take me to the home screen of iOS 9.3.3

  I have recenly updated upgraded to iOS 9.3.3 and I noticed that pressing the home button does not take me to the home screen. The only way to get there is by using the creature of multitasking. (double pressing the home button) Also, some applications seem to freeze if turn my phone off and then turn it back on, or when I access it via the multitasking function. Can someone please help?

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• My Home Page does not load when Firefox starts

  Since the Firfox 18 update, my home page does not load at startup. I have Windows 7 please notify

  Great, thanks it is an extension that was added without my account had been done - for anyone else having this problem, the extension was for Grammarly - grammar checker!

• iPhone SE: rotation of the home screen does not work

  Hi guys,.

  I already looked for answers to this problem in discussions, but I couldn't find anything that solves the problem. Here's the situation:

  -brand new SE iPhone: he got yesterday and just imported my contacts, changed some settings and installed a few applications... that's all.

  -Home screen does not turn in landscape mode (my previous blackberry contact made it by default, so I'm used to doing all that on the phone horizontally keep and wasn't expecting such a problem with iPhone); rotation does not also happen in the app store. However, it runs perfectly landscape when you use applications (Calculator, messages, etc.).

  -J' tried the solutions suggested by other users in different threads:

  (1) checked the lock on the gray screen (it was off). tried to turn it on and then again on the way to see if the rotation is enabled without success.

  (2) looked in ' settings/display and brightness' to see if "zoom mode" has been activated to move it off but discovered that the iPhone SE (or his version of the iOS) has no "zoom mode" option in this Panel... no problem, but no solution: /.

  (3) I think that try a reset should not be necessary, that the phone is brand new and it behaved like that the first time I have it turned on (I reason?).

  (4) I read that some versions of the iPhone (for example 6) do not have the "home screen rotation" function (which, to me, seems completely absurd) and, supposedly, you can use the phone in portrait mode, while the 6s for a reason any the available option: the specs should be similar to the 6s, anyone know (for sure) if the home screen rotation is supported on the self?

  Thank you all in advance... I hope that someone will come up with a solution because I know, it seems a stupid thing, but for me, it's terribly boring.

  the plug should be similar to the 6s, anyone know (for sure) if the home screen rotation is supported on the self?

  To my knowledge, no.

  Barry

  P.S. I have a.