Home with windows 10

Similar Questions

• Help to install VB Studio SP1 on my PC at home with Windows Vista.

  Original title: Windows Vista

  I´d installed on my PC (XP SP 2), VB Studio SP 1 office successfully. But on my PC at home (W. Vista) it failed. Is Vista the problem?

  The same issue was a phone update W

  In both cases, the system stops after a few steps of the update

  Thank you

  Actually installed I´d laptop SP2 from mi sucessfully.on (Vista)

  I saved the download and after that, I run it, offline. Is OK

  Thank you

  On netbook mid (Windows 7) I could run VB Studio SP 1 directly from the web

  Thank you very much

  I m planning to get the two stand-alone with W 7.

• Can I see video security camera to work on the laptop at home with Windows 7?

  Hello!  Seen an ad on the TV for Windows 7 on a student in Germany, watch videos on his laptop from his home PC.  If I update to Windows 7 on PC at work and laptop at home can I view security camera video?  If so, no indication on how to proceed would be greatly appreciated.  THX.

  There is nothing in Windows Media Center that would be involved in listening mode
  the direct result of a remote security camera. Software most likely the camera
  seller would be used, or a java/activeX web-based application. Check with the
  the security camera provider.
   
  The game, August 19, 2010 02:08:33 + 0000, maewright wrote:
   
  >
  >
  > Hello!  Seen an ad on the TV for Windows 7 on a student in Germany, watch videos on his laptop from his home PC.  If I update to Windows 7 on PC at work and laptop at home can I view security camera video?  If so, no indication on how to proceed would be greatly appreciated.  THX.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• My Yahoo Mail is "" forcing me to switch to Firefox by turning my functions in basic. Firefox is compatible with windows 7 for home and student?

  Hi, I have a Yahoo Mail account for many years. Now, they have turned my account in base saying that my IE9 is no longer supported and they are "" forcing me to download Firefox otherwise I have to continue with basic messaging. Firefox is compatible with windows 7 for home and studens? If I download firefox it will affect all the files I have on my computer? Will this affect my windows mail? Thanks for a quick reply.

  Fortuna2015 said

  Firefox is compatible with windows 7 for home and studens?

  As far as I know, Firefox runs on all variants of Windows 7. Firefox works better with a lot of memory, so if your system has 2 GB of memory, you may be limited in the number of windows and tabs you can open simultaneously before things get bogged down compared to a system that has 4 GB of memory.

  If I download firefox it will affect all the files I have on my computer? Will this affect my windows mail?

  As a web browser, you can configure Firefox to your default program to open web pages and links. If you do this, while some icons may change, for example, links to web pages can change to an icon of Firefox. In addition, Firefox has a built-in PDF reader, but you can still use Adobe Reader or another program to read PDF files if you want.

  Are you using Windows Live Mail or another standalone program to retrieve messages? Firefox be involved with it because these programs to get the mail directly, not not using your browser. But if you make Firefox your default for links Manager, when you click on a link in the e-mail software, it will open in Firefox instead of Internet Explorer.

  Other things:

  (1) attention to the download links at random in search engine results. You can get Firefox here (scroll to your preferred language):

  https://www.Mozilla.org/Firefox/all/

  (2) I'm sure after Firefox is started the first time, you will have many questions. The program should give you a little tour of routine, and you can use our support articles for more information: https://support.mozilla.org/products/firefox

  (3) you must install IE11 because there are still a few sites that use patented technologies and are not displayed in Firefox, such as Windows update

  http://www.Microsoft.com/en-us/download/Internet-Explorer-11-for-Windows-7-details.aspx

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Upgrade of RAM for p-7 1074 with windows 7 Home premium

  I have a new HP p-7 1074. It came with windows 7 64 bit home premium and 8 GB of RAM. I installed two more RAM 4 GB cards, but the system says 16 GB of RAM is installed, but still says that only 7.5 GB is used. What is the problem and can I fix it?

  Try to check the advanced boot options to solve your problem by;

  By clicking on the Windows Start 'Orb', then in the bar look for msconfig and press enter
  The "System Configuration" window opens on the screen
  Click on the tab "Boot".
  Click on the 'Advanced Options' button and then uncheck the 'Maximum memory'

  Click 'OK', click 'Apply', ' OK and finally click "restart."

  Frank

• Tecra 9000 - error message with Windows XP SP3 home edition

  Hello

  I have a Tecra 9000 in very good condition, until yesterday, I have no problem!
  After updating my Windows XP service pack 2 on the "service pack 3", everything works fine but when I press the button 'TOSHIBA controls' and 'mouse' for setting, Windows error message occure: "run a dll as an app"!

  Even if I go to "Start" and "Control Panel" and press the mouse, after setting close icon, or just simply do nothing (cancel), the same message! I did not notice any other problem with the TOSHIBA utility!
  My driver for mouse is "Logitech mouse ware, 9.40! Can you help me?

  This oldie works well with Windows XP SP2 home edition and in my opinion you should use without SP3. Try to remove the SP3, and I hope that everything will work properly again. Problem is that the old tools and utilities designed for Toshiba probably aren't tested and updated to SP3.

  I have more Satellite M70 and use sill with SP3. I don't want to risk anything and have problems.

• Qosmio X 500 - 10W: old software with Windows 7 Home Premium

  Hello

  First excuse my bad English, I'm french.

  A month ago, I bought an X 500 - 10W.

  I would like to re - install two old games that turned on my satellite M30-104 with windows Xp.

  I just can not install those on the Qosmio that works with Windows 7 Home Premium 64-bit, even if I use the compatibility mode.

  Is there a way to make these ancient works of software?

  I found the virtual computer (for windows Xp mode), but it only works with Windows 7 Pro or Ultimate.

  Thanks for your replies.

  This with virtual PC is good idea and you should get the right version.
  I mean if you have games that are designed for Windows XP Home edition, then you know that this will not work on the new operating system to Win7.

  Best application virtualization for me without a doubt is VMware Workstation > http://www.vmware.com/

• On Satellite A200 (PSAE6E) FN key works only with Windows XP Home edition

  Hello

  I just get my Toshiba Satellite A200-2BH, (PSAE6E), included with windows Vista. I'm not comfortable with that OS so I formatted the hard drive and install win XP pro SP3 all seem to be fine with the driver downloaded from driver support Toshiba on the line, but the FN key do not work in certain combinations, for example:
  FN + F5 or + F6 or + F7 do not work
  someone say online in this forum that I should install updated BIOS, but this note on the Toshiba support website me resist:

  * "This Bios update adds functionality to your system *."
  * This Bios is NOT compatible for notebook computers equipped with Windows Vista! "*

  What should I do?
  My current setup is:
  Satellite A200 PSAE6E with WXP PRO SP3 with the FN key does not
  Should I install this update to fix this problem?

  Please help me with the path I should follow
  Thank you very much

  FN feature under Windows XP Home edition is supported with the latest version of the BIOS update. So don't be afraid. Download the right BIOS update and update Windows XP Home edition.
  Before start you BIOS updated to close all running applications and make sure that the laptop is connected to the power supply do not do this with battery power!

• Install Windows 10 Pro lowered home (with no product key) after expenses.

  Received my Lenovo ThinkPad 11th yesterday and after much research, I decided to do a clean install. It came with WIndows 10 Pro and I checked the settings (that I created my Windows account at the same time) and he said that it has been activated using Windows. According to the instructions of Microsoft (and various YouTube videos, I've looked), once a machine is activated, it would automatically update the product key, so no need to find.

  That is the problem. I had installed 10 Windows on a USB key and the installation went well, or so I thought. I checked the settings after installing different programs that I would use as he said that I need activate Windows. Well, checking settings, he lowered me 10 Windows Home and of course the the product key in the system (if it's still there) that is the error I get is not valid.

  Of course, it is not a product key on the bottom of the computer and there is nothing in the box. How can I get my product key back so that I can install Pro back?

  Using ProduKey, I get two different keys. One for the new Home edition and the other for the OEM Bios. I guess that I need reintsall (new) and use the key in BIOS Yes?

  So guess what? He's back for Pro and it is activated!

  I think what happened is that I downloaded the single language version and that's what he screwed up. I just redownloaded windows 10 (first on the menu drop-down) and he installed Pro and activated.

  Creating new media doesn't let you choose, he will choose for you based on your product key from the system.

  Thanks for your help.

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• Home Edition Windows 7 x 64 with the update problem

  Hi M.T.

  I have a problem with Windows Update on my W7 home edition of x 64.

  In the last 3 days, the update of trys to reinstall the same updates,

  because it shows failiors update.

  There are not exactly errors messages, but once again necessary to install and restart.

  I tried to choose one of those Det updatelist and try cast

  Microsft home page, download and install manually and restart

  It shows the update is filled to 100%, but once again in the list he has failed.

  What a waste.

  What is the problem. ???

  Concerning

  Cabriuno

  Hello

  Method 1:

  You can try the suggestion given in the article below and check if that helps.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2:

  You can also try to download and install the updates manually. Download the updates from the below given link using the KB updates that show that not installed successfully.

  http://www.Microsoft.com/downloads/en/default.aspx

  Before installing the updates set the computer to clean up state of startup and then continue the installation. To configure the boot of the computer follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.

  I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.

  Please see the bulletin: Windows 7 Upgrade Option Carey Frisch

• Bootsect.dat file is corrupt, NTLDR is missing/compressed on x 86 pc with Windows XP Home Edition Sp3 and Ie8

  I have a x 86 pc with Windows XP Home Edition SP3 and IE8.

  While preparing for a possible update for Win 7, I thought repartioning and "multiboot" my HARD drive.

  I tried to get WinXP operating as best I can.  I was also check out how to use the Windows Recovery Console to reinstall WinXP and transfer files to a clean reinstall.

  Found while searching "All boot paths" to Start\Run\msconfig\BOOT. INI that one boot path has been highlighted with errors indicating that "file is corrupt because playing a disc error has occurred" and that NTLDR is missing or corrupt.  In fact, it is blurred.  It points to "Recovery Console Microsoft Windows/cmdcon.  I've not used the Recovery Console, ever.

  I have a desktop Gateway 5310 S (detail) and no original XP disc, apparently.

  I have, but never used, a 4ea. set of recovery CD as of 12/05/05 I need to have created after purchase.

  I also had many, odd, problems that come and go, including worth displaying various websites, Yahoo Home Pages and E-mail that keep switch to compatibility mode or outright deletion.  The video and audio on Hulu and video-on-demand online services are always out of sync.  I have problems with editing posts on sites like this even if I can edit my profile fine pages.

  This particular set of problems started recently and very suddenly, from one day to the other.  It was after he worked actually pretty good for a change.

  I don't know how long the boot.ini file has been damaged, I actually discovered by chance.

  I can also not to reinstall some programs such as Family Tree Maker 2005 and 2008, when it was suggested to me by ancestry.com to uninstall/reinstall.

  I have the latest Java and Adobe Flash Player.  I've defragged and disc verified my discs.

  I used CCleaner to delete temp and unwanted files per day.  I ran Hitman Pro, MBAM, MBAR, MSE and SAS several times without detected virus or malware.

  And, as I mentioned above, I have problems with the editor of this site, right now.  Sometimes it just freezes and I have to leave to clear.  Other times it's duplicating entire sentences.  He also flip/flip flops between a Publisher full page and, as now, a half page window of the editor on the half left of the page.

  Suggestions from what people you can come would be greatly appreciated.  This gets really annoying.

  Thank you

  Vernon

  When you check the paths in the boot.ini file, and the recovery console is installed, you will always get an error message indicating that the startup path is not valid.

  If the recovery console is actually corrupted just to uninstall, you can reinstall or burn a cd with the recovery console.

  go here for instructions on deleting the recovery console.

  ===========

  Here's how to make a bootable xp recovery console cd

  Courtesy of JoseIbarra

  You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

  Here's how:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  RC. ISO

  Download the ISO from here:

  http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  ===============

  as for the other problems:

  did you use Registry cleaners?

  These can damage your system

  You seem to be free of infection, it would seem that a part of your process cleaning has removed a necessary file.

  ===============

  Checkdisk with parameter/r should be run. and run it again until there is no error.

  ==========

  you are fully updated and patched to Microsoft updates?

• HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

  HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

  You need an external DVD drive to get the repair will.

  Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

  The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

  A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

  See this page from HP