Homepage of database no. connect after changing PC host name
I changed the host name of the computer recently in Windows 7 and since then, I am unableto connect to the oracle database home page, I tried to enter to change some iniialization oracle files, but they are
locked. How can I save the new host name in oracle 10g XE?
GabyPR wrote:
I changed the host name of the computer recently in Windows 7 and since then, I am unable
to connect to the oracle database home page, I tried to enter to change some iniialization oracle files, but they are
locked. How can I save the new host name in oracle 10g XE?
Hello Gaby,.
You may need to 'operating system administrator' privileges to change these files. Run Notepad as 'administrator' file (right click and run as admin option), then open the files in Notepad.
You can try to change the listener.ora and replace the old name to the new host, or you can simply add your old host for the 'c:\Windows\System32\drivers\etc\hosts' file name (if the old host name is not used by another computer on your network).
Concerning
Gokhan Atil
Tags: Database
Similar Questions
-
Problem of Listener after changing the host name &; ip address of a node
Environment - Oracle 11g R2 is installed in the OEL 5 (node Oracle VirtualBox). Voluntarily, I changed the IP address and the host name of the node for use as a node pending. What are the changes that are needed to make in listener.ora and tnsnames.ora file?
Thanks in advance.
Kind regards
Sandy
Published by: 918868 on October 26, 2012 20:21issue following commands OS below
lsnrctl stop
CD /home/oracle/app/oracle/product/11.2.0/dbhome_2/network/admin/
MV listener.ora listener.ora.sav
lsnrctl start
lsnrctl status
# now wait 65 seconds before continuing as below
lsnrctl serviceCOPY orders & results from above, then PASTE it back here
-
Change the host name of the database server, which must change accordingly?
Hello
I have an oracle (instance 11.2.0.3.0) database is running on a Linux machine. (Release of Red Hat Enterprise Linux Server 5.8 (Tikanga))
now, the database is running.
issues related to the:
1. what files to change after change of server name? (tnsnames.ora? listener.ora? something else?)
2. what appropriate measures must be in what orders? thank you very much in advance
(we need to bounce back to the database, listener?)
PL see also MOS Doc 578169.1
HTH
Srini -
Breaking SMB permissions after the NAS host name change.
Broken SMB permissions after the NAS host name change
ReadyNAS 104 firmware 6.5.1
Who can help me?
I couldn't reach the NAS with Windows Explorer. Problem solved now.
-
To change the host name of the device WAE
If I want to change the host name of one of the WAE machine in my network, can I just rename it through Central Manager GUI? It is possible through CLI as well? Would the database of this device kept in CM by the change of host name?
Thank you!
Joe
Hey Joe,
You should be able to change it without any impact. In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit. I would like to know if this is the information you were looking for? In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit.
Kind regards
Kanwal
-
Changing the host name of a Machine running ESXi4.1U2...
in ESXi4.1U2 (note: ESXi ESX not)-I want to change the host name - refers only to ESX - and not all steps are relevant.
After I'm on the way to do it for ESXi4.1U2-
THX in advance,
r
First line (vim - cmd hostsvc/net/dns_info) would get only the host name, while the second line would be the main task of chaning the host name.
Once you run the second line, just select another item in the client vSphere (such as data store) and then check back the "and DNS routing, so it'll be Refresh display data (for me, it automatically displays the changes).
If you still get the same result and the host name has not changed, could check if you can change it via DCUI?
-
Change the host name and the url of the Oracle Application
Hello, I need help to change the url of Application Oracle
OLD url - http:// appssvr.XYZ.com:8007
NEW url - http://erp.XYZ.co.in:8002
Help, pleaseHi Richa,
Please go through the below mentioned Notes Metalink.
You just need to change the appropriate settings in the context of requests ($APPL_TOP/admin/*.xml, location) file and run Autoconfig.341322.1 how to change the hostname of a stream of Applications using automatic configuration
338003.1 how to change the host name or port of the database layer using automatic configurationLet me know if you still have doubts.
Concerning
Neeraj Sharma -
On the summary of the machine tab, you can see a host name, below the status line. Is there a way to change the host name, because now it reads something is no longer connected to the ESXi server.
I'm under ESXi 4 Update 1.
Unfortunately there is not. You do not have access to the physical console?
Marcelo Soares
VMWare Certified Professional 310/410
Master virtualization technology
Globant Argentina
Review the allocation of points for "useful" or "right" answers.
-
Re: change the host name to db and apps on linux 64-bit component,
Hello
12.1.3 on linux 64-bit r,.
I want to change the host name of the db layer change and apps on linux 64-bit,
are below there is place of docs? /
How to change the host name of a component of Applications using AutoConfig (Doc ID 341322.1()
NOTE: 338003.1 -How to change the host name or port of the database using AutoConfig layer.
Kind regards.12.1.3 on linux 64-bit r,.
I want to change the host name of the db layer change and apps on linux 64-bit,
are below there is place of docs? /
How to change the host name of a component of Applications using AutoConfig (Doc ID 341322.1)
NOTE: 338003.1 -how to change the host name or port of the database layer using automatic configuration.
Yes.
Thank you
Hussein -
LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf
Hi everyone;
I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).
I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.
I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)
So yes, here it is...
Anyone have any ideas on the issue?
See you soon,.
Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip. On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.
-
Can I change the host name and the IP of the ESXi servers?
For reasons, I need to change the host name and IP address of my ESXi hosts on which is located the offices of the view.
I can change it directly? or view desktop computers will be affected by the change?
This thread will help you
Re: Hosts view change ESXi and Vcenter Ip addresses
If you found my answer helpful, review the allocation of points by choosing answers useful/correct
-
I have a lot of VSphere 4.1, ESXi 4.1 that I need to change the host name. Then I go in VSphere, highlight the host, set mode now, goto, DNS and routing configuration, the new host name change and restart, get fashion maint and host on the console of the host name ESXi said the NEW host name in DNS and routing it says the NEW name of host, but on the left hosts & Clusters discovered I still see the OLD host name... I try to add the new host name and it is said that there are already. Is there something I missed >? >
John
the name to remember in the DB vcenter. one of the ways is to remove and add the vCenter.
-
Recovery after disaster - new host names, locations of different files. -noob
Hello
I am a "junior dba' best, pardon the beginner questions.
I'm learning works recovery after disaster before that I never do. My scenario is that I'm assuming the worse where I actually take backups RMAN backupsets and auto, copy them to a new computer, and all rise again.
In the documentation, I read that it says that you should copy tnsnames.ora and listener.ora. My first question is my hostname dead.franklyn.bignose.ca machine "works, but pretending is dead" and the NEW machine has live.franklyn.bignose.ca. tnsnames and listener.ora both of course refers to old.franklyn.bignose.ca, so I do not know how to approach this problem.
Second, the new machine is that a new installation of 11.2.0.3 and the db home in/u01/app/oracle/product/11.2.0/dbhome_1/ old one was an update of 11.2.0.1 11.2.0.3 so he lives at u01/app/oracle/product/11.2.0.3/dbhome_1/. I don't know how cranky that will make Oracle.
Any comments or advice?My first question is my hostname dead.franklyn.bignose.ca machine "works, but pretending is dead" and the NEW machine has live.franklyn.bignose.ca. tnsnames and listener.ora both of course refers to old.franklyn.bignose.ca, so I do not know how to approach this problem.
You must set your file listener.ora accordingly with respective host names. Say about the live host name, the listener.ora should have the hostname as living and dead server, the listener.ora must have the hostname as dead
Second, the new machine is that a new installation of 11.2.0.3 and the db home in/u01/app/oracle/product/11.2.0/dbhome_1/ old one was an update of 11.2.0.1 11.2.0.3 so he lives at u01/app/oracle/product/11.2.0.3/dbhome_1/. I don't know how cranky that will make Oracle.
It wouldn't matter. Only thing is, you must make the appropriate changes in the required files (say listener.ora).
Refer to this
http://learnwithme11g.WordPress.com/2011/12/20/creating-physical-standby-database-with-RMAN-duplicate/
http://learnwithme11g.WordPress.com/2011/12/07/creating-a-physical-standby-database-11gr2-3/
http://www.Oracle-base.com/articles/11g/DataGuardSetup_11gR2.php
http://gavinsoorma.com/2010/03/17/create-standby-database-using-11g-duplicate-from-active-database/ -
stop the warning to change the host name
I continue to be careful:
Your computer name is already in use on this network. the name has been changed...
I click ok and keeps coming back with many more and will not stop!
Thank you
This is the share name that is duplicated on another device on the network, or the name of VICTORIES under the Ethernet settings. Both are in system preferences.
Under network, click the network connection you are using (wired or wireless). Click the Advanced button, then the WINS tab change the NetBIOS name to something else. Click OK. If it is active, click on the button apply.
If that doesn't help, click on the share icon. Change the computer name to something else. This is necessary, or even do anything if at least one of the options of sharing is checked.
-
My network, a HP LaserJet P1505n printer, host name is set to NPI1BDC68. Is this cable or is there a way for me to change? Trying to solve: manuals were reviewed, Forum questions were searched, google General search conducted. I am running Win XP and a Mac Pro with OS X 10.6.8.
Well, which took me 10 minutes to solve. I found the answer on a HP site based in France. (I kinda changed my google query and tried again.) The site asks on first access, if you wish to continue in English, thankfully. http://support.HP.com/us-en/document/c01175001
In short, use Internet Explorer or Safari, go to the IP address of your network printer. For Win XP users, you can determine the IP address using, start/printers and faxes /(select printer)/properties/ports tab / select new/Configure button/second field printer port to down the IP address shown.
Once connected to the network printer subsystem, select the Networking tab. The host name is the first field which can be changed. Enter a new name from 1 to 15 characters. Tip: He doesn't like spaces. Underscores work well and the new name can be mixed case. Press the button apply at the bottom of the screen when done. Warning appears that access to the printer may need to be changed if the IP address has been changed. Acknowledge the warning. Printer goes offline for a few seconds. The page automatically refreshes and the new host name can be confirmed by inspection.
Maybe you are looking for
-
I have a G4 and the transfer of data to an I mac?
I have a G4 and the transfer of data to an I mac? There is no port Firewire on the Imac A1418
-
10.11.2 update blocks the account and apps
I've updated my Mac mini (i7, 16 GB; computer with 1 TB of HDD, more NAS RAID 5 attached, more a Lacie 2 TB hard drive for Time Machine backups) of OS X El Capitan 10.11.1 in 10.11.2. After the reboot, don't not a single application works. The only p
-
Cannot download the security updates in windows xp
Windows XP issue - I have several times notice that security updates are available, but after going through the movements SEVERAL times, always the message automatic updates that "some updates could not be installed". All seem to be updated for secu
-
Black screen after the user logon in Windows 7
HelloI use Windows 7 ultimate x 64 on my desktop. Recently, I just turned on my PC and when I tried to connect to my account after the Welcome screen, a black screen came up with the cursor and nothing else has been demonstrated. He just hung there.T
-
HP elitebook 8440p complete notebook drivers and the sequence of the drivers
"I produced HP elitebook 8440p pc note book without LF438ec #UUZ. I use win 7 Home premium 64-bit, I want a free recovery Online link