stop the warning to change the host name

Similar Questions

• LaserJet P1505n printer: How can I change the host name to NPI1BDC68 to meaninful something more?

  My network, a HP LaserJet P1505n printer, host name is set to NPI1BDC68. Is this cable or is there a way for me to change? Trying to solve: manuals were reviewed, Forum questions were searched, google General search conducted. I am running Win XP and a Mac Pro with OS X 10.6.8.

  Well, which took me 10 minutes to solve.  I found the answer on a HP site based in France. (I kinda changed my google query and tried again.)  The site asks on first access, if you wish to continue in English, thankfully.  http://support.HP.com/us-en/document/c01175001

  In short, use Internet Explorer or Safari, go to the IP address of your network printer.  For Win XP users, you can determine the IP address using, start/printers and faxes /(select printer)/properties/ports tab / select new/Configure button/second field printer port to down the IP address shown.

  Once connected to the network printer subsystem, select the Networking tab.  The host name is the first field which can be changed. Enter a new name from 1 to 15 characters.  Tip: He doesn't like spaces. Underscores work well and the new name can be mixed case. Press the button apply at the bottom of the screen when done.  Warning appears that access to the printer may need to be changed if the IP address has been changed.  Acknowledge the warning. Printer goes offline for a few seconds. The page automatically refreshes and the new host name can be confirmed by inspection.

• Problem of Listener after changing the host name & ip address of a node

  Environment - Oracle 11g R2 is installed in the OEL 5 (node Oracle VirtualBox). Voluntarily, I changed the IP address and the host name of the node for use as a node pending. What are the changes that are needed to make in listener.ora and tnsnames.ora file?
  
  Thanks in advance.
  
  Kind regards
  Sandy
  
  Published by: 918868 on October 26, 2012 20:21

  issue following commands OS below

  lsnrctl stop
  CD /home/oracle/app/oracle/product/11.2.0/dbhome_2/network/admin/
  MV listener.ora listener.ora.sav
  lsnrctl start
  lsnrctl status
  # now wait 65 seconds before continuing as below
  lsnrctl service

  COPY orders & results from above, then PASTE it back here

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• To change the host name of the device WAE

  If I want to change the host name of one of the WAE machine in my network, can I just rename it through Central Manager GUI? It is possible through CLI as well? Would the database of this device kept in CM by the change of host name?

  Thank you!

  Joe

  Hey Joe,

  You should be able to change it without any impact. In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit. I would like to know if this is the information you were looking for? In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit.

  Kind regards

  Kanwal

• Can I change the host name and the IP of the ESXi servers?

  For reasons, I need to change the host name and IP address of my ESXi hosts on which is located the offices of the view.

  I can change it directly? or view desktop computers will be affected by the change?

  This thread will help you

  Re: Hosts view change ESXi and Vcenter Ip addresses

  If you found my answer helpful, review the allocation of points by choosing answers useful/correct

• Changing the host name of a Machine running ESXi4.1U2...

  Re: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 861

  in ESXi4.1U2 (note: ESXi ESX not)-I want to change the host name - refers only to ESX - and not all steps are relevant.

  After I'm on the way to do it for ESXi4.1U2-

  THX in advance,

  r

  First line (vim - cmd hostsvc/net/dns_info) would get only the host name, while the second line would be the main task of chaning the host name.

  Once you run the second line, just select another item in the client vSphere (such as data store) and then check back the "and DNS routing, so it'll be Refresh display data (for me, it automatically displays the changes).

  If you still get the same result and the host name has not changed, could check if you can change it via DCUI?

• How to change the host name

  I have a lot of VSphere 4.1, ESXi 4.1 that I need to change the host name. Then I go in VSphere, highlight the host, set mode now, goto, DNS and routing configuration, the new host name change and restart, get fashion maint and host on the console of the host name ESXi said the NEW host name in DNS and routing it says the NEW name of host, but on the left hosts & Clusters discovered I still see the OLD host name... I try to add the new host name and it is said that there are already.  Is there something I missed >? >

  John

  the name to remember in the DB vcenter. one of the ways is to remove and add the vCenter.

• Change the host name and the url of the Oracle Application

  Hello, I need help to change the url of Application Oracle
  OLD url - http:// appssvr.XYZ.com:8007
  NEW url - http://erp.XYZ.co.in:8002
  
  Help, please

  Hi Richa,

  Please go through the below mentioned Notes Metalink.
  You just need to change the appropriate settings in the context of requests ($APPL_TOP/admin/*.xml, location) file and run Autoconfig.

  341322.1 how to change the hostname of a stream of Applications using automatic configuration
  338003.1 how to change the host name or port of the database layer using automatic configuration

  Let me know if you still have doubts.

  Concerning
  Neeraj Sharma

• change the host name

  On the summary of the machine tab, you can see a host name, below the status line. Is there a way to change the host name, because now it reads something is no longer connected to the ESXi server.

  I'm under ESXi 4 Update 1.

  Unfortunately there is not. You do not have access to the physical console?

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Re: change the host name to db and apps on linux 64-bit component,

  Hello
  
  12.1.3 on linux 64-bit r,.
  
  I want to change the host name of the db layer change and apps on linux 64-bit,
  
  are below there is place of docs? /
  
  
  How to change the host name of a component of Applications using AutoConfig (Doc ID 341322.1()
  
  NOTE: 338003.1 -How to change the host name or port of the database using AutoConfig layer.
  
  
  Kind regards.

  12.1.3 on linux 64-bit r,.

  I want to change the host name of the db layer change and apps on linux 64-bit,

  are below there is place of docs? /

  How to change the host name of a component of Applications using AutoConfig (Doc ID 341322.1)

  NOTE: 338003.1 -how to change the host name or port of the database layer using automatic configuration.

  Yes.

  Thank you
  Hussein

• Change the host name on STANDY RAC cluster nodes

  Hello
  
  I would like to know the steps required to modify and hostname in Oracle RAC configuration, if I update the host names of the 2 nodes in the CARS
  
  IM under Redhat EL 5, Oraclle 11g
  
  Thanks in advance

  I don't think you can change the hostname with CRS without re-installation of CRS.

• HP Pavilion 360: How can I change the host name of files?

  I need to chance the host name of file on my PC I do not know how?

  Ok. Thank you. I'll give it a try!

• I am unable to stop the hosts of loading process, because it takes a lot of memory

  I am unable to stop the hosts of loading process, because it takes a lot of memory

  Hello

  Some processes have to load, however, you can use these tools to check those and look for ones that
  can use a lot of memory after loading in the Manager of tasks - processes tab - CTRL + SHIFT + ESC
  Check the CPU column.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• By specifying the host name for the database during installation

  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.
  
  Published by: user4928701 on July 8, 2011 23:15

  user4928701 wrote:
  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.

  Published by: user4928701 on July 8, 2011 23:15

  lsnrctl stop

  move/rename listener.ora to new/other file name

  lsnrctl start

• IKEv2 - xml file and the host name

  Hello world

  Ikev2 anyconnect works very well in the PC.

  Xml file in c\programs data\profile PC hostname say anyconnect_ikev2.

  Under the ASDM - anyconnect profile I changed the host name to say xyz.com.

  Then PC I tried to connect again and found that the connection has been established and the hostname under xml view profile: PC go to xyz.com.

  Need to know how the PC has managed to connect even if the host name has changed?

  Concerning

  MAhesh

  Mahesh,

  The client connects to the base on the HostAddress profile field.

  Host name, is what is used to populate the drop-down list and identifies the connection in "plain language." Although it is often the COMPLETE domain name, it doesn't have to be.

  When a user makes the connection, one of the things that happens is that any changes in profile on the ASA is pushed to the locally stored user profile.