Horizontal lines after having printed a picture with HP 7610

Similar Questions

• Horizontal lines after turning on my Satellite

  Sometimes when I turn on the laptop, it happens with a lot of horizontal lines and worsens. If I press the specific keys on the left side of the keyboard, the lines disappear and may disappear completely and no return, but most of the time they come back when I remove my finger from the key.

  I did restore of the system a day ago and lines temporarily disappeared but now they are back and would not go. Now, they have disappeared randomly. Is it a hardware fault?

  If Yes, can someone help me contact Toshiba in Spain I've tried to communicate with them and AI? I had no answer. AI? ve only had my laptop a month and I feel unlucky that each computer AI? ve got, won't. But this time, we have 3 years warranty snack.

  Thank you
  Sam.

  Hello Sam

  Try please connect external monitor to your laptop. FN + F5 key combination to switch to the external display only. Please watch carefully if the problem persists and let us know. We will continue our discussion after your next assignment.

• Horizontal lines after rendering?

  I have a video that is very "fast" or theres a lot of movement in it.

  After I have make, it becomes very 'line is' whenever there is a rapid movement. Basically, I see horizontal lines of the pullout.

  The source footage is not like that.

  Is there a special method or the codec I can use to avoid this problem?

  Sounds like the video is interlaced. Your computer is progressive and interlaced cameras some shoots. Older TV is interlaced, and some of the most recent one is both. If the end result is for the computer only you'll want to deinterlace the video. If it's for TV only you can probably leave him alone and it should play fine when playing on a TV.

  I think for deinterlacing you have to change it when you export to "Progressive Scan". However, you can also deinterlace the clips in your project before exporting. I called technical support Adobe on this same thing several years and they suggest I do both, deinterlace the clips in the project when you export it.

  You may have seen 1080i and 720 p, etc. the P is a progressive scan and the I for interlaced. I think the reason why interwoven was because it's less bandwidth to send half of the image at once (all other lines) than the whole image. Thus, a need for dissemination to use interlaced. But, everything I guess that moves to progressive scan. However, I imagine that the intertwining of will always be supported because many things is intertwined.

  Just play with a small clip by exporting it just as it is and make a DVD of it, play it and see what it looks like on your DVD player. My DVD drive has done a top for progressive scan button. You may need to change a setting on your TV or it, or she can just play so what. Then, if you are not satisfied with the result, try to simply define the export to progressive scan option.

  I have installed on this computer first otherwise I would look to see how to deinterlace the clips for you, but it's something as simple as right-clicking the clips on the timeline, or something. I can watch it later and get back to you.

  Hope that helps!

• Screen flashing horizontal lines after replacing the RAM

  Hello world

  Today, I replaced the original 2 2 GB RAM each with 2 other 4 GB each (Kingston) for better performance.

  I have a Macbook Pro end 2011 15 ", IOS 9.3.1.

  I opened the computer it vacuum cleaner very carefully, with the lowest power and then I removed the two RAM.

  I'm not new, the machine worked perfectly for 20 minutes, then the screen went black (electricity was running in it, I could see some lights on the bottom), I did close it with the button, turn it on and horizontal lines appeared.

  I turn again and nothing has changed. I replaced the new memory with the 'old' and I still have horizontal lines that cross the monitor (white, grey, black).

  Any idea of what is happening and how to fix it?

  Thank you in advance!

  That could be the problem:

  http://www.Apple.com/support/MacBookPro-videoissues/

• GeForce 9800GT problems (resolution and horizontal lines) after upgrading to Windows 7

  I have recently upgraded to Windows 7 on my desktop HP m9350f computer.  I more a few days later my screen has finished by resolution 800 x 600 with horizontal lines on the screen, from the start.  I spent several hours with the support of Microsoft and HP by train to reload the updated drivers from the Internet HP site and Web of NVIDIA site with no improvement.  As part of the normal troubleshooting I plugged a cable and another monitor and the problem is neither the monitor nor the cable.  I removed the video card and temporarily replaced by another video card and the problem goes away, so the problem is with the graphics card (as opposed to the motherboard).  I replaced the NVIDIA card and the problem is back, essentially confirming that the problem is directly related to the graphics card.  While I found 'a lot' of discussions on the internet about similar issues with 9800GT cards, I can't find a solution to this problem. HP and MS have exhausted their resources. Any ideas or solutions?

  It's time for a new video card.   Remember to match the energy needs of the new card with the power supply of your PC.

• Text 3D CC + postcard problem! horizontal line after rendering!

  Hello.

  I tried to do a text in 3D, using a 3D text with a postcard background layer. I merge the two layers and it will then restore. But during the rendering process, I get a horizontal line of light and shadow in the center of the layer of finish.

  like this http://oi61.tinypic.com/5wl35x.jpg

  A friend send a PS file and told me to check it out. I played a little with it and I found that when I use his layer of the postcard (so that in the file it send me) and it has merged with a 3-d object, it turns out that the fine. Without the line. But as soon as I do my own postcard layer and use that one, I've got the bug again.

  The line is always in the Center and the horizontal, no matter where my 3D object.

  I checked on the settings basic 3D of the layer of the postcard, compared him to mine and could not find any differences. My PC is new and very powerful, he can also be my GPU, since it turns out fine when I use its postcard layer.

  I also tried to reset the settings by deleting this file in the appdata folder, but it does not solve my problem.

  Please someone help me! I bought a PC just to learn the 3D work and it's very frustrating and discouraging to be stuck at the beginning like this.

  Hi Alex,

  I noticed the difference in the lighting too, while playing around the scene. I need to talk with the developers to see what is happening because the directionality you point out (bright on top, darker on bottom) is meaningless to me, given the IBL all-white. I think there may be a bug in the rendering (even without the line), which has been fixed in the version of 2014 (15.2.2).

  I see that you have the version 14.2, so you should get at least the 14.2.1 updated because it has fixed major bugs in this document, including the 3D layers Merger Treaty.

  Kind regards

  Steve

• I'm getting horizontal lines on my prints through my epsomsx200 of ideas please

  set of photos have horizontal lines of a thumbs down for their

  Please see if:

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/2779/1163

  and/or,.

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/2779/1168

  help.

• Why my printer more hp 8600 spit an extra page (empty) after having printed a single page?

  I use a HP Officejet Pro 8600 Plus on a HP Pavilion HPE computer running 64-bit Windows 7. He did since I started to use the new printer there is ten days.

  Y at - it a fix for this problem?

  I found something that seems to work.  At the end of this process, you will be asked to restart your computer, so probably best to do when you are not in delays and/or with several programs.

  You need the HP Jet Pro 8600 for this Officce installation disc.   Insert the disk into your CD/DVD/BlueRay player and be sure that it is active.

  Then go to control panel > programs and features.  Search for "Software device HP Officejet Pro 8600Basic".   Do a RIGHT CLICK on the program.  Appears in a context menu for the uninstall, change or repair.  Left click on "fix."  The program took about 5 seconds on my K-3770.

  After the repair the program runs it asks to restart the computer for the changes to take effect, now or later.

  I tried the repair by printing multiple Word 2010 files which had been printing an extra 10 seconds after page started printing.  I have tested as print current Page, print selection, print, print all extended Custom Pages.  It seems to have solved the problem.

  I hope this helps everyone.

  HP-why this feature isn't VERY accessible?  I fell on it, when I was trying everything and anything to correct this proglem.   I'm sure it's buried somewhere in the documentation, but I ran into it.

• How can I print a picture with a caption and EXIF information?

  Hello

  I want to print a photo and use the legend of meta-data and information on the shutter speed, focal and so on. I realized that there is a way to print this information in the print module, but it is connected directly to the image, that doesn't look good. Question is there another way? Perhaps with Photoshop? I would like to have the flexibility I have with the slideshow Designer, where I can put the legend to the left of the image and the ISO, shutter speed and so right. Is it possible somehow?

  I'm looking for an easy preset that I could apply to a large number of photos.

  Thank you!

  There's a Lightroom called Mogrify addin that will make this (and much more). Just google it. It's something that you need to buy, but there is not a lot of money.

• I had to remove my suite CS6 Design and Web to download and install the new LR6 and impossible to find a link to download the suite again and re install. This after having spent 5 hours with a technician in the CAT to do the upgrade of LR of CC.

  Where can I get the link to download design CS6 and web premium? I was forced to delete/uninstall my whole suite in order for the CC app download and install lightroom 6.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• horizontal lines dark 3110cn

  After replacing the toner cartridge black on my printer 3110cn, it leaves dark horizontal lines on black contamination check the page and it leaves of the dark horizontal lines on a printed page with a photo.  I asked a new cartridge, thinking it was defective and that did not solve the problem.  Checking page of contamination is correct on the other three colors.  Any ideas what could cause this problem?  My printer is under warranty, but ran only 7,000 copies.

  Any help would be appreciated.

  
  

• Borders and the vertical and horizontal lines

  Hi guys,.

  I'm new to InDesign and I am trying to create the below, but I'm having difficulties.

  How can I create the border and vertical and horizontal lines as shown in the picture? I wan't to make a model of these so that I can easily modify the title and the text and keep the same formatting.

  Thank you!

  

  You must learn to have a little patience. Everyone here is a volunteer, and we all work day, too.

  Your outer rim could be either a stroke applied to a block of text in multiple columns, or it could be a separate framework used closely as a background. If you apply a line directly on the text block, you can add an insert to move the text of the line. Horizontal rules (that's the term for a straight line in page layout) look like they're probably paragraph nets (lines above or below a paragraph). These can be included as part of the paragraph styles applied to securities. Paragraph nets can be adjusted to the weight and position on the basis of either the first or the last line of paragraph (depending on whether the rule is above or below) and can run across the width of the column or just the width of the text, and to add dashes, positive or negative.

  There is no way to automate the vertical rules, at least not with ID right out of the box. You can add a few PlaceHolder rules between columns on your master page, but you will need to override and set them on the page of the document itself. Set benchmarks of rule between columns on the master page would help, especially in a situation where the rule needs to be broken to accommodate something like the floating image.

  You can see if the school library has some reference materials. A particularly good book for a beginner would be Visual Quickstart Guide of Sandee Cohen for InDesign.

• Print the date with photo and individual photo

  I want to print a picture with the date of Jim and photo print

  I want to print a picture with the date of Jim and photo print

  ==================================
  You can add text for just some pictures...
  with Windows Paint...

  Start / Accessories / Paint...

  Adding text with Microsoft Paint
  http://www.peddlergraphics.com/PaintText.html

  Add text to a picture with Windows Paint
  http://www.pcdon.com/deAddingTexttoaPhoto.html

  And/or... Maybe the following free software would be
  be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  FWIW... you can add the date corresponding to one
  or a batch of photos using the free software
  FastStone Image Viewer.

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  "Basic steps to add dates to image files.
  using Fast Stone Image Viewer'...
  (FWIW... it's easier to do than to explain)

  (You may need to experiment with the post office, police
  size, color and different Variables to achieve
  the desired result).

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...
  (If the white field has any text inside...
  by selecting erase it and press your delete key...

  Open the window drop... "Insert a Variable."
  choose... EXIF DateTime / Date and time... Ok...

  Browse for the files you want to attach... Select
  them and on the left, click on the Add button...

  Choose an output Format...

  Choose an output folder...

  Check the "Rename..."

  Click on the button convert...

  When the files are converted... Click done...

  Now go to your backup folder and see the result...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to create a horizontal line in the region of html

  Hello

  How can I create the html elements, including a horizontal line in an html area filled with items. I want to use this horizontal line to part elements optically. Moreover, my solution for now is to group the elements belonging together in a separate html area. So I have now 3 parts of html, each filled with 5 columns of elements. Is it possible to align the elements in the 3 regions (together)? Cause at the present time, only the items in each region are aligned.

  I use oracle 11 g 2 with apex 4.1

  wucis wrote:

  Apex version is 4.1

  Theme: Sapphire 17

  Page: Two level Tabs - right Sidebar (optional / based on a table)

  The region is HTML

  Main question is, how to create a horizontal line as visible separator between items.

  My personal preference would be to group the items according to the needs in the subregions and use CSS to display the Visual borders and uniform spacing of control over formatting tables.

  If however you want using HTML single region, is to create elements of the only view to the agenda of the positions of the sequence in the region where you want the jumps to appear, with the following parameters:

  Name: PX_HR_1 / / substitute suffix number and an increment of page as required

  Display in the form: Display only

  Save Session State: NO.

  Start on a new line: Yes

  Start the new field: Yes

  ColSpan: number of columns in your layout

  Label: leave blank

  Horizontal/Vertical alignment: Above

  Model: --choose a model--

  Type of source: Static assignment

  Source of value or expression:

• HP OfficeJet Pro 6978: Horizontal lines in printing photos on paper photo with HP OfficeJet Pro 6978

  I bought a HP OfficeJet Pro 6978 today and implemented according to the instructions.  I loaded with premium photo paper more HP and proceeded to print a photo from my Mac.  As he came on the printer it has horizontal lines there.  I read somewhere on the forum that it could be a software problem, so I went to my computer to Microsoft and tried to print the same image using OS 7 and the results are the same.

  After reading some of these other forums, I pulled the plug and has waited a few minutes and plugged back in and the problem was solved!