Host with dual NIC, public and private, the installation program
I am trying to set up an environment and I want to just make sure that its security and I'm doing things.
My host mahchine, Windows 7, has two network cards. A single network adapter is behind a firewall, and the other is open to the internet. I wish I had one of my VMware machines to be on the public network adapter. Now I know how to do this in the network Configurator in the workstation. My question is, is that if I connect the public network for vm machine card, my physical host computer will no longer use this card. I'm just afraid to have public network map is open on my host.
Then, is to have a VM machine linked to a NETWORK card, then only allows only not the host machine to not use this NETWORK adapter or is there a way to do it?
Thanks for any help
Yes, you can do it. In the properties of the network adapter on the host operating system, disable all protocols, clients, etc. EXCEPT the VMware Bridge Protocol. Then, VMware can use this device, but the host will not.
Tags: VMware
Similar Questions
-
I'm running Windows 7 Ultimate on my Toshiba Tecra A4-S211 and provided that the installation went, it seemed that took place without incident; except that when I try to start windows I see: "Starting windows" followed by "Setup prepares your computer for first use" that is displayed for about 3-5 seconds and then it restarts and displays abruptly: "cannot start Windows. A recent hardware or software change might be the cause. "I tried the safe mode, but also"last known good configuration"and I get the same results. Finally, I tried the repair function on the installation disc and says am Startup Repair is unable to repair the computer automatically, where then I click to send information to Microsoft to be told that if I had all the devices attached like a camera or portable music player to remove them and restart. I have nothing set, no flash player or anything.
I tried to do all the steps above a dozen times each, and the results are consistent, except that the start of repair is sometimes said that there is nothing wrong with windows. Here also to point out that I had XP running on it before without problem and I tested the DVD on another computer and it worked.Hi Austin,.
You can try some of them in Mode safe - tap F8 repeatedly that you start.
If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
protected. The manufacturer of your system will also sell the physical DVD cheap since you already
Clean Windows. You can also do an ERD on another computer.Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
return and then try to startup repair.)How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7Try the disk Options recovery or Windows 7 startup repair.
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlAlso from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlRetry After Chkdsk startup repair.
If after those you can try the system restore to fashion without failure or the valuation or Windows 7
disc.How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html--------------------------------------------------------------------
If you need to repair disks - these help repair Windows not re-install.
How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html======================================
If necessary:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlFollow the steps in this link as well.
-
Public and private IPs on the same Interface by using NAT Exemption/policy NAT
I'm looking for some feedback on whether my thoughts on the installation program will run.
Equipment: PIX 515E 6.2 (2)
Scenario:
The inside interface of the PIX will host 3 blocks of addresses IP - 24 public 2 blocks and 1 private/16 block. (All IP addresses have been replaced by dummy blocks.)
Blocks of audiences:
* 192.168.10.0/24
* 192.168.20.0/24
Block of private:
* 10.50.0.0/16
Traffic from the public 2/24 blocks should go through the firewall without address translation.
The two blocs of the public will be able to receive connections initiated from the Internet.
Public blocks will need to be able to send and receive traffic on a static VPN tunnel to our headquarters without subject to address translation
Traffic leaving the sector private/16 block should be subjected to PAT before passing through the firewall.
Private/block 16 will not receive incoming traffic from the Internet (other than responses to outbound connections initiated from within the private block).
However, the private block will also have to be able to send and receive traffic on a static VPN tunnel to our headquarters * without * subject to address translation (i.e. hosts on our corporate network must be able to initiate connections to the private block and vice versa).
The inside interface of the PIX will be connected to a Catalyst 3xxx series layer 3 switch, which will be responsible for routing all internal (so the PIX will never be routing of traffic on the interface, it was received).
My ideas on how to implement are:
* Use the exemption of NAT to exempt public address translation blocks. This will allow incoming and outgoing connections through the firewall.
* Use the exemption of NAT to exempt the block private NAT when connecting to our head office on the VPN tunnel.
* Use policy NAT w / PAT to translate the block private connecting to all other hosts.
I have translated these thoughts in the following configuration snippet.
Because the NAT exemption is processed before policy NAT in the evaluation of the NAT rules, I believe that this should allow the public IP blocks treat incoming/outgoing traffic without translation, while submitting the private translation block (except during handling of incoming/outgoing connections to our network of corporate office).
Can someone confirm my assumptions about this?
# ----------------------------------------------------------------------
traffic of # which should be exempted from translation
permit ip 192.168.10.0 access list nat_exempt 255.255.255.0 any
nat_exempt 192.168.20.0 ip access list allow 255.255.255.0 any
nat_exempt ip 10.50.0.0 access list allow 255.255.0.0 10.100.0.0/16
traffic of # which should be the subject of translation
policy_nat ip 10.50.0.0 access list allow 255.255.0.0 any
# Suppose 192.168.5.1 is the address to use for PAT
Global (outside) 1 192.168.5.1
NAT (inside) 0-list of access nat_exempt
NAT (inside) 1 access-list policy_nat
# assumes that 192.168.10.7 is the IP address of the inside layer 3 switch
Route inside 192.168.10.0 255.255.255.0 192.168.10.7 1
Route inside 192.168.20.0 255.255.255.0 192.168.10.7 1
Route inside 10.50.0.0 255.255.0.0 192.168.10.7 1
#assume the following configuration sections appear elsewhere: static tunnel VPN, ACL, ifconfig, etc..
# ----------------------------------------------------------------------
Yes, this will work, even if you don't need political NAT for the 10.50.0.0 network. For PAT the 10.50.0.0 network when to anywhere (except via VPN) just do:
Global 1 192.168.15.1 (outside)
NAT (inside) 1 10.50.0.0 255.255.0.0
As I said, you have works perfectly, the above is just an easier way to do it.
-
How to get the public and private keys to use recaptcha?
I registered with google to get a recaptcha for my Web site. I've gotten has been the key to site and the secret key! If I need to get the public and private key for muse!
Hello
Please use the site as a 'public key'key key and Secret as "clΘ privΘe".
Concerning
Vivek
-
Generate public and private keys within the smart card
Hi all
I use this code to generate public and private keys within the smart card.
KeyPair kp = new pair of keys (KeyPair.ALG_RSA_CRT, KeyBuilder.LENGTH_RSA_512);
kp.genKeyPair ();
PrivateKey prikey = kp.getPrivate ();
PublicKey pubkey = kp.getPublic ();
This code runs without error.
I need to obtain the public key of the smart card. So I need to get the public key to a byte array.
But I can't get these keys in array of bytes of plain text.
The methods I can get for pubkey object are
pubkey.clearKey ();
pubkey. Equals (obj);
pubkey.getSize ();
pubkey.getType ();
pubkey.isInitialized (); only these.
I use
Eclipse Version: 3.4.1 (level of agreement of the compiler = 1.4)
Jcop plugin (to connect with the real map and to test the java code in virtual card provided by JCOP)
OmniKey5321 (characters without contact) card reader
What is the reason to get those above methods pubkey object? Is it a version problem?
How can I get the public key in ordinary byte array? Is this possible?
If it is not possible, is there a way to get the public key as a certificate of export or something another solution?
If my script is not a possible strategy, how can I use private public keys to send the applet-specific data? Is there a better way to do it?
Published by: 863766 on June 6, 2011 12:16 AMRSAPublicKey pubkey = kp.getPublic();then
pubkey.getExponent(...); pubkey.getModulus(...); -
I bought a security certificate, and the site tells me that it has been installed successfully. I need to export the certificate so that I can create public and private keys, but I can't find the certificate to do so.
Firefox (Firefox Orange) > Options > Options > advanced > Certificates > authorities > export
-
Telepresence Content Server: Dissemination to the Public and private users
*****
Infrastructure:
TMS 14.5 (private network)
VCS - C 8.5.1 (private network)
VCS-E 8.5.1 (Public network)
S5.3 TCS (private network)
Codian: Supervisor 8500, MSE 8510, 8321 ISDN (private network)
*****
New to this, so I don't know what would be the best way to do this, but basically the goal is to broadcast videos of TCS to the users of the network internal as live audiences without security problems. Try to do this without an external broadcast service.
It is the State that works very well for internal users, but is not available to public users because it's on a private network.
Any help is greatly appreciated.
Thank you
MikeYou will need to provide public access to your Cameras, you can consult the administration of CHT Guide for a list of ports. We have our TCS on a private network and have the lanes of traffic through the network load balancers that rely on the public network to provide all access public and private.
-
It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?
It would be the default path to wrap the text with the image when you work in Design view.
This document explains more:
https://helpx.Adobe.com/Muse/using/wrapping-text-image.html
Thank you
Sanjit
-
I have a host with 2 NIC cards. I created a Windows prompt with 2 NIC cards. I would like to bind each NETWORK card on the client to a different physical NICS on the host. Is there a way to do this? They always end up both bind to the same network adapter.
Hello.
You can do it. Assuming that you have a Windows host, make sure that VMWare bridge Protocol is linked both to the network adapters on the host. Then, use the VMware virtual network Editor to set VMnet0 until the bridge at 1 on the network adapters on the host. Vmnet2 or another unused to the bridge on the other network adapter for the host.
Good luck!
-
Question about the installation of XP with an OEM disc and using the number of CoA HP
Hello
I have a DC5100SFF that I bought refurbished last year, and it came not with all drives. It comes with windows XP pro and has the CoA sticker with the activation code. It also has "HP" written on it.
I thought to wipe the hard drive and reinstall XP Pro in the near future. I have an an OEM Windows XP Pro disc, but it is not specific to HP. The CoA sticker has been removed from the new drive (and the package is not open), but there is nothing on the packaging to indicate what OEM brand (its likely it was another popular provider).
My question is, if I install XP from this disc, he on my machine can use the number on the certificate of authenticity to activate it, or do I need to use a specific disc HP XP Pro?
Thank you
Hello:
David is correct. You don't have the product key if you use recovery discs.
However, I believe that you can still get the recovery disc for your Business from HP desktop PC.
Just dial 1-800-334-5144 and inform the representative of customer services that you need a set of quick restore CD.
You will need to provide the model number and serial number.
A game costs $10.00.
As for your other question... If someone has already used the product key XP pro on the sticker on your PC, you can use any disk XP Pro OEM installation and enter the product key.
I do it all the time. I used OEM Dell on HP PC disks. Never had a problem.
Paul
-
Since Acrobat Reader downloaded DC I can't sign my PDF documents. It does not give me the option more and yes I am connected. On the old version, I got no problem with clicking on "signature" and draw the area where I needed my signature, put the password and "POOF" my signature would be there. With this new version, it won't do that or give me the option. The online help is useless. I need to explain to me how connect you as I used too?
I assumed that you had a digital signature created in your player application of old and whenever you use to fill out a pdf with a signature field signed you it. But in order to draw and then sign you must use Acrobat Pro DC no DC drive.
Thank you
Abhishek
-
I recorded my new password to download Lightroom; the installation program then asked my password and rejected the password with that I just signed up. Any suggestions?
Could you please try the computer administrator password here.
Kind regards
Hervé Khare
-
I am trying to install the 2007 Office Suite on a computer windows vista laptop. In the middle of the installation the following code appears:
The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.
What should I do to complete the installation.
Office:
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of the Office.
They will help you with your office questions in the newsgroups Office above.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: "SQLDUMPER.
When I start my laptop windows xp, an error message appears "SQLDUMPER library failed initialization.your installation is either corrupt or has been tampered with please uninstall then re run the installer to correct this problem.
Hi mark25666,Here's a similar post on this issue. Check the suggestion given in the link and see if it helps you too the question of fixing.If this is not enough, post your query in the SQL Server instances for better assistance. -
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
Hey
PeLon416
If you have problems with the gateway recovery process, you will need to contact Gateway
It's their recovery process not microsofts
You may have a hardware problem
support of bridge at the link below
http://support.gateway.com/support/default.aspx
Walter, the time zone traveller
Maybe you are looking for
-
Add an element to a cluster without updating all users of the cluster
I have a cluster that is sent to many different vi. Whenever I have added to this cluster, I need to change every vi that uses it to fix the various controls of input terminals and ungroup by names. I'm not change or remove existing items in the sour
-
Hello once again I have a simple question If we have the tables, boleans, strings, graphics, and many other things... on the front how to make them invisible (invisible as if there is nothing of them) for a few moments? Is there a report any with th
-
Users are invited to increase the length of their password the next time that they are required to change their password or is change immediately for all users at 6 characters or less?
-
It just started doing this morning... I had Outlook Express for YEARS!
-
NVIDIA GT 630 m not switching or working in HP dv6 7010tx?
Got the DV6 new 7010tx and it seems switchable Nvidia graphics is not at all even when the laptop is on the mode of high-performance switching and even tried to place profiles for apps, still no.... what to do? ! Help?