HostService in IC Agent availability
I tried to look at the availability of the service windows on a specific host. However, the only data that resembles collect are "Running" or "Does not work" or a variant of start or stop... However these results of text cannot be mapped on a timeline to see how long the service is down or provide such data on a report. I tried to create a derived metric that in turn the 'Running' at 100% and any other value would be 0% but I'm not a programmer so my knowledge is limited in this region...
That's what I was playing with, but I get an error when I try to use it
TrueAvail = 0
If (HostServiceState value.name = 'Running')
Returns the value 100
on the other
return TrueAvail
Can someone help with the derived metric? or does anyone have any better ideas on how to get windows service availability?
You can go there. This cartride will create derived parameters svcAvailability and svcBaselineAvailability
During the creation of the cartridge I fond syntax error in the code above. I've updated that (in the .car & respoonse above)
When you create a Time-Driven metric (or a rule), it is almost always activate "Enable Trigger without Data" too.
I did it for metric svcAvailability
Tags: Dell Tech
Similar Questions
-
What are the native agents available in the ESXI if I plugged with vCenter!
Hello
Please let me know what are the available agents in ESXI, if it is connected to vCenter?
HA - FDM
Management - VPX
Hi Hari,
'management' of services agents on ESXi are under /etc/init.d that they are installed with the host software:
pass, ntpd, sfcbd, slpd, wsman, vobd
The agents that comes exclusively from vCenter Server are:
vCenter agent:
"vpxa" - the software that collects, communicates and executes the actions received from vCenter Server. The Server vCenter agent is installed the first time that any host is added to the inventory of vCenter Server
Checking status: State of /etc/init.d/vpxa
HA agent:
"vmware-fdm" (FDM/Fault Domain Manager)
The older pre 5.0 welcomes its AAM agent
Kind regards
P.
-
UCCE 8.5.4 - Whisper works not when agents are available
Hello
I configured the murmur to play for a group of skills, and it works only if the call is on hold, and no agent is available. When an agent becomes available, the whisper plays. However, if there are agents available at the time the call is sent to the queue to the node of the skill, the murmur does not play. If anyone has experienced this?
Thank you
Brian
Group competence app_media_lib and media_server value in front of the queue and then test.
-
Install the new FDMEE 11.1.2.4 - ODI Agent does not start
After the installation and configuration of EMP 11.1.2.4, components (including the FDMEE) on a Windows 2008 (single-server installation), I ran diagnosis of EPM system and found the only test that failed was to the Agent of ODI.
ODI Agent availability check: http://server1:6550 / oraclediagent
Error: com.hyperion.cis.utils.BadResponseCodeException: bad response with the GET method code: 404
Recommended action: check the application of the FDM Enterprise Edition is started and the database schemas exist.
FDMEE and all the other components of the EMP seem to work and open in the workspace. The only problem is that ODI Agent will not start. Re-installation and configuration of FDMEE has not fixed this problem. I also tried to start manually in the WebLogic administration server, but it has not started and I found the following error in ErpIntegrator0.log.
# < 18 June 2015 3:47:13 AM PDT > < error > < hats > < server1 > < ErpIntegrator0 > < ExecuteThread [ASSET]: '9' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1434624433908 > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1434624127664 'for task ' 0'. Error is: "weblogic.application.ModuleException: [HTTP:101216] Servlet: 'AgentServlet' failed by preloading at startup in a Web application: 'oraclediagent'."
com.tangosol.net.RequestTimeoutException: timeout during the startup of the service: ServiceInfo (Id = 0, name is Cluster, Type = Cluster
Set of members = MasterMemberSet)
ThisMember = null
OldestMember = null
ActualMemberSet = MemberSet (Size = 0
)
Member ID | ServiceVersion | ServiceJoined | Member State
RecycleMillis = 1200000
RecycleSet = MemberSet (Size = 0
)
)
)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:58)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:4)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.java:968)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:937)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:919)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:1296)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:297)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:204)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:181)
to oracle.odi.runtime.agent.coherence.OdiAgentCoherenceCache. < init > (OdiAgentCoherenceCache.java:52)
at oracle.odi.runtime.agent.servlet.AgentServlet.initCoherence(AgentServlet.java:812)
at oracle.odi.runtime.agent.servlet.AgentServlet.initializeClusterCache(AgentServlet.java:762)
at oracle.odi.runtime.agent.servlet.AgentServlet.startup(AgentServlet.java:437)
at oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:250)
at javax.servlet.GenericServlet.init(GenericServlet.java:242)
to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:149)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:69)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
'
weblogic.application.ModuleException: [HTTP:101216] Servlet: 'AgentServlet' failed by preloading at startup in a Web application: "oraclediagent."
com.tangosol.net.RequestTimeoutException: timeout during the startup of the service: ServiceInfo (Id = 0, name is Cluster, Type = Cluster
Set of members = MasterMemberSet)
ThisMember = null
OldestMember = null
ActualMemberSet = MemberSet (Size = 0
)
Member ID | ServiceVersion | ServiceJoined | Member State
RecycleMillis = 1200000
RecycleSet = MemberSet (Size = 0
)
)
)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:58)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:4)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.java:968)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:937)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:919)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:1296)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:297)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:204)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:181)
to oracle.odi.runtime.agent.coherence.OdiAgentCoherenceCache. < init > (OdiAgentCoherenceCache.java:52)
at oracle.odi.runtime.agent.servlet.AgentServlet.initCoherence(AgentServlet.java:812)
at oracle.odi.runtime.agent.servlet.AgentServlet.initializeClusterCache(AgentServlet.java:762)
at oracle.odi.runtime.agent.servlet.AgentServlet.startup(AgentServlet.java:437)
at oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:250)
at javax.servlet.GenericServlet.init(GenericServlet.java:242)
to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:149)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:69)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:149)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:69)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: com.tangosol.net.RequestTimeoutException: timeout during the startup of the service: ServiceInfo (Id = 0, name is Cluster, Type = Cluster
Set of members = MasterMemberSet)
ThisMember = null
OldestMember = null
ActualMemberSet = MemberSet (Size = 0
)
Member ID | ServiceVersion | ServiceJoined | Member State
RecycleMillis = 1200000
RecycleSet = MemberSet (Size = 0
)
)
)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:58)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:4)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.java:968)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:937)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:919)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:1296)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:297)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:204)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:181)
to oracle.odi.runtime.agent.coherence.OdiAgentCoherenceCache. < init > (OdiAgentCoherenceCache.java:52)
at oracle.odi.runtime.agent.servlet.AgentServlet.initCoherence(AgentServlet.java:812)
at oracle.odi.runtime.agent.servlet.AgentServlet.initializeClusterCache(AgentServlet.java:762)
at oracle.odi.runtime.agent.servlet.AgentServlet.startup(AgentServlet.java:437)
at oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:250)
at javax.servlet.GenericServlet.init(GenericServlet.java:242)
to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:149)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:69)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
# < 18 June 2015 3:47:13 AM PDT > < error > < hats > < server1 > < ErpIntegrator0 > < ExecuteThread [ASSET]: '9' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1434624433916 > < BEA-149202 > < encountered an exception while trying to commit Task 7 for the application "oraclediagent". >
During my research of these errors, I found results indicating the problem could be related to multiple NIC cards or enforceable, but I don't know if this is the reason of my problem and how to check it. Any help would be appreciated!
In your case, it seems that the list of the WKA is formed using the IP 127.0.0.1 loopback address but consistency has bound to the IP address of 10 points. Finally, make sure that they match so that ODI Agent can start, but given that it's a DHCP box you well then that tends to add another layer of complication.
What we tend to do in support with DHCP boxes to avoid problems with name resolution is to simulate a static IP address by adding a loopback adapter (google, you can add a loopback adapter Server 2008 for instructions) with a static IP address (I often use smth like setting IPv4 10.10.10.10 (, netmask 255.255.255.0 & no gateway) then add an entry to the hosts file to map the IP address for the host name of the host name for example, 10.10.10.10
You must make sure that the host name resolution works as expected in Java according to this link as well (which I think is why we go to the "loopback hack" first place in support): https://docs.oracle.com/cd/E40248_01/epm.1112/epm_install/frameset.htm?ch06s02s01.html
I would start by looping config tbh as I remember seeing someone with a box of AWS, earlier when helping a colleague where host name resolution was not working with that tool and they had problems with the Agent of ODI.
Concerning
Craig
-
Can I use groups of network devices ACS to have one device acting as authenticator ACS two Windows domains to 802. 1 x for a single switch?
Hope the question makes sense but to put it a little more meat on the issue:
I have a single ACS device that I try to use for authentication of 802. 1 x on a switch. The problem is that I want to have the part of allocation of VLAN implementation allocated through the ACS server on the control dependant users with an account domain, but we have two domains without trust between them. the remote agent in ACS to should not be installed on servers in different domains and that two agents available are for resiliance only, so does not fit this unfortunatley.
That's why I finished watching with several groups of devices.
someone at - it ideas if this will work or if there is another way to make this work.
Hello
ACS cannot authenticate 'natively' in 2 different domains that do not have a defined relationship. If this is not possible, then you must make 2 ACS servers, one in each area. Configure the ACS 'primary' to the 'secondary' server proxy queries based on the provided field.
This would require a second server ACS be set upwards (you will probably pay an additional fee for the second ACS server). You do not want to configure a proxy distribution table. This would require the user explicitly indicate the domain name with their user name.
Kind regards
~ JG
Please evaluate the useful messages
-
EIM/WIM: Display opening hours
Hello
We have installed just EIM/WIM and you try to check a situation where there is no agent available to meet the demand of the plant for a cat. When a customer clicks on the Chat button in a Web browser, he or she gets the following message appears:
Thank you for your inquiry. Our opening hours are from 09:00 - 5 pm PST, Monday to Friday. If you are putting in the hours of service and always to get this message, please try after some time, as all our agents may be busy or not available at this time.Then we created a calendar with hours open from 01:00 to 23:00, but new customers receive the same message, that is the part of this message indicating the opening hours does not correspond the opening hours of the calendar. We restarted the EIM/WIM server but again no luck.
What is the cause of it? How can we get around this problem?
Thank you.
Igor
Igor,
It is a static message (not a message of macro based) is why it continues to display the same message
This can be changed in the model of cat (Department > Department > cat > models) in the Options-> tab off hours see you the EIM/WIM Administration Console User Guide (page 177-181). I think it should be the same for the v4.2 (x) and the v4.3 (1).
Thank you!
-JT-
-
Cannot add a device Cisco IOS - development issue?
I try to add a router IOS (as a platform) my Hyperic (3.2.1) resources and I kept getting this error (see the following stack trace).
=============================================================
java.lang.NullPointerException at
org.hyperic.hq.ui.action.resource.platform.inventory.NewPlatformAction.execute(NewPlatformAction.java:108) to
org.hyperic.hq.ui.action.BaseRequestProcessor.processActionPerform(BaseRequestProcessor.java:63) to
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) to
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196) to
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432) to
javax.servlet.http.HttpServlet.service(HttpServlet.java:717) to
javax.servlet.http.HttpServlet.service(HttpServlet.java:810) to
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252) to
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
....
=============================================================
So, I downloaded the src and it built with the following parameters of the construction.
Windows Server 2003 SP2 (Standard edition)
Java 1.5 update 15, Ant 1.7.0 JBoss 4.0.3SP1, PostgreSQL
However, I still get the same error. After adding a few log statements, I realized that in NewPlatformAction.java ("run" method), the value of the agent is zero [agent is created by calling BizAppUtils.getAgentConnection (...)] which causes the NullPointerException in the above stack trace [boss.createPlatform (...,...,..., agent.getId ())].
BizAppUtils.getAgentConnection () is essentially a block of code to check if the "IP Port string' is null or not and this string always seems to be the null value. I put some instructions to log in NewPlatformAction.java and BizAppUtils.java and have cut-and - paste a few lines of the log server below.
Basically, BizAppUtils jump the complete code block that is supposed to create an Agent.
==============================================================
2008-03-13 12:23:32, 537 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] find the type of platform [10004]
2008-03-13 12:23:32, 537 [http - 0.0.0.0-7080-2] INFO [NewPlatformAction] platform [Cisco 1720] was created with attributes add ImageButtonBean = [null, null] cancel = ImageButtonBean [null, null] create = ImageButtonBean [null, null] Delete = ImageButtonBean [null, null] ok = ImageButtonBean [38: 10] Delete = ImageButtonBean [null, null] reset = enable ImageButtonBean [null, null] = ImageButtonBean [null, null] userset = ImageButtonBean [null, null] pageSize = null startMonth = 2 startDay = 2 startYear = 1 startHour = 12 startMin = 23 startAmPm = pm endMonth = 0 endDay = 1 endYear = 2008 endHour = 12 endMin = 23 endAmPm = null startTime = now recurInterval = recurrenceFrequencyDaily = numDays daily = 1 NumSemaines = 1 recurrenceDay=[Ljava.lang.Integer;@121e1bb recurrenceFrequencyMonthly = onEach numMonths = 1 recurrenceWeek = null monthlyRecurrenceDay = null eachDay 1 endTime = none = RID = null type = null name = Cisco 1720 location = lab description = router Cisco 1720 cpuCount = null fqdn = cisco1720.inside.eclyptic.com FPS = [{address = 10.100.1.13 netmask = mACAddress = id = 0 mTime = null cTime = null}] numIps = 1
2008-03-13 12:23:32, 553 forms of INFO [NewPlatformAction] [http - 0.0.0.0 - 7080-2] string value for the ip port is: null...
2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [BizappUtils] Agent ip port string: null...
2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [BizappUtils], returning null
2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] after the creation of agent
2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] check for agent == null is true
==============================================================
I have attached a screenshot ' create new platform "UI of Hyperic and my modified source files.
I would really like to know if I'm doing something wrong or is this a valid bug in Hyperic?
I just want to add this IOS device to Hyperic to familiarize myself with how Hyperic manages network devices. My long-term goal is to add network devices in Hyperic via an API - so pointers (or the samples/docs) to an API which allows to add devices to Hyperic is also really useful.Hi Michelle,
I was able to reproduce using a fresh installation with no agent installed. At least one officer has, on the same machine that the HQ server is fine. We should apply rather than just displaying this message:
"There is no agent available to treat this platform."Can you install + import agent and try again?
-
Creative Suite 5.5 loaded except Illustrator.
I just upgraded to a new MacBook Pro and tried to load the Creative Suite 5.5 of my installation CD. All programs loading except Illustrator. Any suggestions?
U,
Maybe it's a for this specialized forum (where you can be able to find the answer in the previous discussions),
http://forums.Adobe.com/community/download_install_setup
or for customer service (check the box I still need help and hope for an agent available for a conversation).
Here,
http://helpx.Adobe.com/contact.html?product=Illustrator&topic=downloading-installing-and-s etting up
or here,
-
Illustrator only moved since the apps Manager in CC (trial version)
I tried illustrator to see if I like it and it will not be installed. Any ideas/help?
It gives me "ERROR: third payload Installer vcredist_x86.exe failed with exit code:-2147024546" when I for more details.
Blobber,
Maybe it's a for this specialized forum (where you can be able to find the answer in the previous discussions),
http://forums.Adobe.com/community/download_install_setup
or for customer service (check the box I still need help and hope for an agent available for a conversation).
http://helpx.Adobe.com/contact.html?product=Illustrator&topic=downloading-installing-and-s etting up
-
I bought a copy of Illustrator CS6 last year and got a swap program this year for Windows. When I tried to register my software, he said that my license was revoked. What should I do? And I did to cause this?
VectorShader,
I think this is one for the customer service (check the box I still need help and hope for an agent available for a conversation).
http://helpx.Adobe.com/contact.html?product=Illustrator&topic=downloading-installing-and-s etting up
or for the customer support,
http://helpx.Adobe.com/Adobe-Connect/Adobe-Connect-phone-numbers.html
Nobody here knows more than you in these issues.
Is there no solution anyway, please report back and I will alert someone who can find the right someone sort.
-
I can't download the software I just bought! Adobe pull together your already!
I can't download the software I just bought! Adobe pull together your already!
Po,
I think this is one for the customer service (check the box I still need help and hope for an agent available for a conversation).
http://helpx.Adobe.com/contact.html?product=Illustrator&topic=downloading-installing-and-s etting up
for this specialized forum (where you can be able to find the answer in the previous discussions), or
-
Hello
in 10g R2, OEM Db control, in preferences, in the notification rules there are four choices:
Why are these choices exclusive? We can choose only on them. Why we cannot be informed of the availability of the agent and availability of database at the same time? I couldn't see if it is included in another.Agent availability. Database availability Host Availability Listener availability
Thanks for your explanation.Write several rules.
-
with selector Agent Dashboard App availability report
Hello
on 5.6.4 I try to create an availability report of the App with Agent dashboard selector.
But what creation I'm lost by choosing the right element in Add a report View.
I have tested many of them, but never could generate the same graph.
The image of App availability with selector Agent Dashboard is attached as a file.
Thanks for help.
I'm not a fan of this point of view and think it would make a bad report because it only shows the current values.
But if you really want to be able to abandon this view in a report, you can do this by adding "Reportlet" for the purpose of notice "Operation/AppMonitor/App availability with selector Agent systems" in the definition of WCF configured Editor.
Kind regards
Brian Wheeldon
-
Get status on ESXi 5.1 high availability Agent
Hello everyone!
Anyone has any script to check the status of Agent of ESXi 5.1 high availability?
Thank youRafael Nunes
Hello
OK, try this, I check on my side and that's ok.
Get-VMHostService [ESX] | Where {$_.} Key - eq "vmware-fdm"}
And you can have a status of running.
Kind regards
Julien.
-
10 gr 2 agent is available on the open VMS
10 gr 2 agent is available on the open VMS?Yes. You can download from the link below
http://www.Oracle.com/technetwork/OEM/grid-control/downloads/agentsoft-090381.html
Maybe you are looking for
-
Thunderbird 38.0.1 requires the master password to be entered twice after activation of Gmail OAuth
I have a Gmail (IMAP) and an iCloud (IMAP) TB account protected by a master password. Since the upgrade to to 38.0.1 and the configuration of the acct of Gmail for OAuth I find that when I run the application of TB he invites me for the password twic
-
Safari was hacked, so I can't change my search engine of google, what do I do?
Safari was hacked, so I can't change my search engine of google, what do I do? Whenever I search, it is said it is set to Google search, but as soon as I press on enter happens with yahoo. It has been hacked.
-
Re: Need a recovery disk for Satellite P300D - 11 H
Any body know how to get a new windows vista for the above laptop restore disc? Please hope somebody. Thnx.
-
Is it possible to manually select the images that you want imported from the camera?
original title: SLR digital import question is there a way to choose which images get imported when importing images from my Canon t2i to my laptop? most of the photos on my camera have been imported already and filled my hard drive, so I transferred
-
is j5780 software & drivers for win 8 overview of available consumer
PC clone 2.4 bicoeur seagate 750 GB hd 2 MB mem