Hot add option missing from all virtual machines.

Similar Questions

• Setting Options such as Hotplug for all virtual machines

  Hello!

  I have about 5 esxi hosts 5 and about 50 virtual machines

  Unfortunately I forgot to select some options like activate the plug-in memory and cpu hot

  I have 2 questions

  1 can I do this without turning off the machine

  2. How do I make a few options like this (or for example another option as vmtools update during the feeding cycle) for all virtual machines in my environment

  It's too much time to go to all virtual machines and turn them off and turn on these options

  Thank you very much

  These features must be enabled before the virtual machine is running.  So, you will need to turn them off and then use something like powercli to enable the features and turn them back on.

  Here is an example on how to do it with powercli: http://ict-freak.nl/2009/10/05/powercli-enabledisable-the-vm-hot-add-features/

  -KjB

• How to connect sql database to esxi to save all data from the virtual machine

  How to connect sql database to esxi to save all data from the virtual machine

  Please provide steps

  In simple terms, you cannot connect ESXi to SQL. Connect a vCenter SQL (Windows only).

  If you want to save all the data that is contained in your virtual machines, I suggest a backup solution.

  Suhas

• Change the default options for a NEW virtual machine in ESXI 5.1

  Hello

  I am looking for a solution change the 'default' options for a new virtual machine created in ESXI 5.1

  I want to have parameters such as 'cpu/memory HOT-add' default to enabled instead of disabled.

  There may be more options to change to a new virtual machine.

  All those who have an option to change the 'default' options for new virtual machines?

  THX

  You can change the/etc/vmware/config of vSphere host file and add the lines mem.hotadd = 'TRUE' and vcpu.hotadd = 'TRUE '.
  The settings then apply to any VM on this host when virtual machines are turned on...

  I just tried this on a 5.1 ESXi host and it seems to work perfectly...

  / Rubeck

• Get-file provides an account of all virtual machines in the folder structure.

  Hi all

  Tried a few searches in the community, but impossible to find exactly what I was looking for.  We have a configuration folder structure in vCenter.  We have some companies that we bought over time and we set up a folder, separate them with a top-level folder and folders nested for different types of virtual machine below, something like:

  CompanyX

  -Mail servers

  -Web servers

  -DB servers

  For the purposes of internal billing, asked me to get a count of all virtual machines for each company.  I can get the count for virtual machines directly in the "CompanyX" folder, but it does not include virtual machines in subfolders.  This is the script I used so far:

  Write-Output "VM enumeration for CompanyX VMware environment Total: $((Get-dossier 'CompanyX' |)). "(Get-VM) .count) | out-file "D:\ScriptResults\CompanyX.txt" - append

  As I said, that works very well for the virtual machines in the head in the parent folder, but it does not go down to the next layer.  Is there a way to get folder do that?

  I am a novice PowerShell/PowerCLI, so forgive me if I'm missing something obvious.

  Thank you

  Bob

  Hi Bob,

  I don't know if it was different in previous versions, but in the latest PowerCLI version 4.1 U1 if you

  Get-file "CompanyX" | Get - VM

  It will retrieve the VM in the top folder and all subfolders. You can easily check this with:

  Get-file "CompanyX" | Get - VM | Select-Object - Property Name, folder

  If you only want the virtual machine in the top folder you can use:

  Get-file "CompanyX" - NoRecursion. Get - VM

  The following script will get the VM number for all companies and write the result to a .csv file.

  $ExcludeFolders = "Discovered virtual machine","other folder to exclude"
  Get-Folder vm | Get-Folder -NoRecursion | `
  Where-Object {$ExcludeFolders -notcontains $_.Name } | `
  ForEach-Object {
    $Folder = $_
    $Report = "" | Select-Object -Property Company,"Number of VM's"
    $Report.Company = $Folder.Name
    $Report."Number of VM's" = ($Folder | Get-VM | Measure-Object).Count
    $Report
  } | Export-Csv -Path CompanyVMsCount.csv -NoTypeInformation -UseCulture 
  

  If there is high records of the page you want to exclude from the list you can add them to the $ExcludeFolders variable in the first line of the script. The second line of the script gets all the 'vm' top of the folders page. The third line filter unwanted records. A few lines create the output objects. And the last line written objects in a .csv file.

  I added the Measure-Object cmdlet for the ($Folder |) Get - VM | Measure - Object). Account because otherwise you will get an error if the number is 0 or 1.

  Best regards, Robert

• Gwetting a list of all virtual machines and used space

  
  I apologize for my very basic question.

  I need to make a file (better if an Excel file) with a list of all virtual machines in a simple 5.x vSphere infrastructure including 2 VMare ESXi 5.x servers and the disk space used (allocated, used) of each virtual computer.

  The easiest way seems to list the virtual machines from the vSphere client and export the list as a .xls file.

  It seems simple, but when I look at the file I see a lot of missing VMs or a large number of missing values for several virtual machines (just the Runts).

  Is this a problem with my vSphere client?

  I tried to create a PowerCli script using the "Get - VM|" Select-object Name"command, but my limited skills will let me extract the value of the used space.»

  Can someone please provide a sample of PowerCli I can just copy and use?

  Is there another way to get the information I need?

  Concerning

  Marius

  .

  Not knowing that if you have configured a cluster or just stand-alone hosts, here is one simple line...

  Get-VMHost-name | get - vm | select name, usedspaceGB

  From there, you can make formatting, get total usage etc.

• Close all virtual machines on ESXi

  Hello

  I'm new in the administration of vSphere. I would like to raise our ESXi servers due to updates, but I've read that you shut down all virtual machines that are on it. You have something better to do then close VMs one? I expect a powershell script, but I have found none so far.

  Thank you

  Kralijir, you can do it from the console GUI.

  In the left pane, select the ESX host.

  In the right pane, click the tab "virtual machines". Now, you can select block all virtual machines here and simply right-clicking them stop all, or make other changes in bulk.

  Some changes via selection bulk require all virtual machines to be in the same State; Turned off the power, power, etc.

  If it works for you, please mark this answer as the 'response '.

• ESXi 4.1 upgrade to ESXi 5.5 while all virtual machines and data warehouses

  We have two servers ESXi 4.1.0 348481 (Essentials) and we need to upgrade to ESXi 5.5 for support of Windows Server R2 2012. We intend to use the interactive upgrade. We want to ensure that the virtual machine is preserved. More precisely VMFarm001 where ESXi is installed in the same data store as VMServer1. VMServer1 is our largest server and cannot be migrated to another data store easily because we are not allowed for vMotion.

  The following layout

  VMFarm001

  Dell PowerEdge R710

  Data store:

  Storage1 - 1.36 TB

  VMServer1 - MS Server 2003

  Install ESXi

  Storage2 - 1.82 TB

  VMServer2 - MS Server 2008 R2

  VMServer3 - MS Server 2008 R2

  VMFarm002

  HP ProLiant ML350 G5

  Data store:

  Storage1 - 95GB

  Install ESXi

  ISOs

  Storage2 - 1.82 TB

  VMServer4 - MS Server 2008 R2

  VMServer5 - MS Server 2008 R2

  I have a feeling I'm worried for nothing given that option during the ESXi upgrade and keep the VMFS datastore.

  Thank you

  Yes, that's correct.

  I recently finished the upgrade of lots of stand-alone hosts ESXi 4.1 (with local storage only) to 5.1 and all were successful. The same process applies to 5.5, so you shouldn't have a problem with preservation of VMFS data warehouses (and all virtual machines).

• The list of all virtual machines with more than 2 virtual disks

  Hello.

  I want to list all virtual machines in a data center vCenter, who got more than 2 virtual disks. Here's the workflow, I am working on that:

  1 get the view of data center

  2. get the Cluster Data Center view like the 'begine_entity '.

  3. for each view cluster overview the VirtualMachine bit cluster seen as 'begin_entity '.

  4. for each VM view, this information: VirtualMachine-> config-> hardware-> device of

  Above information is a table.

  I need help in order to extract information from this table disk, then run an if condition where the VM who got more than 2 discs should print.

  Could help you. I wrote the script to the point 4. just need advice for the posterior.

  Thank you.

  You can try one of the following values-

  1 If ($vm-> {'summary.config.numVirtualDisks'} > 2) {...}

  2 $diskCnt = grep {$_-> isa ('VirtualDisk')} @{$vm-> {'config.hardware.device'}};

  The above assumes that you've got your $vm with a filter property as follows:

  $vms = Vim::find_entity_views (view_type-online 'VirtualMachine'), the properties-online ['summary.config.numVirtualDisks', 'name', 'config.hardware.device'];

  my $vm foreach (@{$vms}) {}

  ...

  }

• Run a Windows command on all virtual machines

  Using PowerCLI, is it possible to run a Windows command on all virtual machines?  I would like to hiberbation disabled on all my servers as it is unnecessary and take up disk space.  Running powercfg-h off will do, but I really want to do it on all 200 of my VM.

  I can't seem to find the option in group policy, so I was hoping that this could be an option.

  The above posts are excellent resolutions. Here is another possible approach.

  You can do this with a Powershell script. Something like this should work:

  1. The list of virtual machines:

  SE connect-ViServer here VCenter server name

  $vms = get - VM

  1. If you have installed Powershell and PSRemoting enabled on each virtual machine, run the following:

  $vms | foreach-object {Invoke-Command - ComputerName $_.} Name - ScriptBlock {powercfg - h}

  1. If you have not installed Powershell and PSRemoting on each virtual machine, use WMI:

  foreach ($vm to $vms)

  {

  $vmName = $vm. Name

  (\[WMIClass\] ")
  (' $vmName\ROOT\CIMV2: Win32_Process "). Create ("cmd /c powercfg - h)

  }

  You should probably use the WMI method since it is unlikely that all of your virtual machines have Powershell installed and configured for remote access.

• All virtual machines on my ESX host off power at the same time

  Hi all

  Recently I attend the interview. a guy asked me this question

  < police = "Times New Roman, serif" >all virtual machines on my power off ESX at the same time host < / police >< / police >?

  What was the cause of the highest of the error, how to troubleshoot the error.please me.anybody guide to address this problem?

  Thanks

  Surya

  If all the virtual machines if lower at the same time, my bet would be VMware HA. Just for fun, build it inside your head:

  (1) 8 ESX nodes, all service consoles connected to a unique management switch.

  (2) now to create a cluster of these nodes, put all your virtual machines in there and activate HA, choose ' host isolation response: power off.

  (3) draw power from your management switch. HA on each host will deduct that the host is isolated-> turn off all the virtual machines.

  Each host will think the same thing, and hop find you with all virtual machines down to the time in the whole of the cluster. Have seen this one several times when people go and upgrade their management switches in the evening ("hey, it's only management").

  Visit my blog at http://www.vmdamentals.com

• vCenter shows all virtual machines and the host is disconnected

  Hello

  I have a two nodes in the cluster ESXi6 U2 (recently updated to 5.5) running on hp dl380p gen8. For some reason all the virtual machines are running on host A (HA and DRS are enabled).  vCenter shows all virtual machines and host A is disconnected. Cannot connect to A host using vSphere client or web client. Cannot vMotion the VMs. Impossible to activate SSH. Connection DCUI works very well. Cannot perform any action VM

  All virtual machines are in place are running at this point. I don't want to restart the virtual machines. Can you help me please?

  Thank you

  AJ

  Frozen screen DCUI came back to life. The active SSH access, killed the running process. The host of running backs.

  See you soon,.

  AJ

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• How can I add a tag to a virtual machine?

  What is the best way to be part of an workflow add a label to a virtual machine? The closest I found is System.getModule("com.vmware.library.vc.customattribute").setOrCreateCustomField (), but given that the custom fields do not appear in the web client, I need a way to do the same with the tags in place.

  Unfortunately the vSphere API does not yet provide a way to create (vCenter) tags. The only way is to use the provided of the vCO powershell cmdlets.

• All virtual machines to an ESXi Server ping

  Hi all

  For a project of mine, I need to create a script that asks for the ESXi server host name,

  and after that start ping all virtual machines that are on the ESXi server.

  I tried to do without success up to now.

  Help will be appreciated.

  Thank you!

  What follows is based on the fact that the VMware tools are installed.

  If they are not installed, you could adapt the script to try and ping displayname VM.

  $esxName = "MyEsx".

  Get-VMHost-name $esxName | Get - VM | %{

  $hostnamePresent = $_. Guest.HostName - don't $null

  {if ($hostnamePresent)}

  $pingable = test-Connection - ComputerName $_. Guest.HostName - count 1 - calm

  }

  else {}

  $pingable = $false

  }

  Select - InputObject $_ - the property name.

  @{N = "This Hostname"; E = {$hostnamePresent}},

  @{N = "responding"; E = {$pingable}}

  }