The list of all virtual machines with more than 2 virtual disks

Similar Questions

• Cannot start a virtual machine with more than 1 CPU socket added

  I've set up a few boxes of ESXi 5.5 with the free license in recent weeks, they have all been without problems so far. All 4 servers have the same exact hardware

  Environment:

  Dell Poweredge T620

  E5-2630 2 Intel CPU

  40 GB OF DDR3 ECC RAM

  ESXi is installed on 2 x 146 GB 15 K SAS drives RAID-1

  Data for virtual machines store are 8 x 600 GB 10 K SAS RAID-10 disc

  Guest operating system is Server2012r2 on all virtual machines

  Installed it on ESXi 3 previous were conducted with custom ESXi 5.5 Dell without problem.

  The 4th is where I will have questions. I used the following ESXi installed just in case there is a bug somewhere

  5.5 of VMware ESXi

  ESXi 5.5 customized by Dell

  5.5 U1 of VMware ESXi

  Any version of the ESXi I use I can't have a virtual machine to begin with more than 1 CPU socket added to it. The virtual machine does not start even the VMWare BIOS. I tried the Bios EFI as well with no luck. The error message I get in the events is ' fatal error VMware ESX: vcpu (vcpu-X)-X:VM - entry failed; Valid VMCS (error code 8). The vcpu-X is always another. I have attached the log file is created. If I give the VM 1 single processor TI starts very well. I'm at a loss as to what could be the issue.

  Problem is solved. I caught another server with identical hardware, verified it worked properly, then started to swap parts between them. Turned out to be CPU1. Once this has been replaced from a working server I have not had any problems. Warranty has been appealed.

  Thanks for all the help!

• Cannot create a virtual machine with more than 256 GB

  I thought that the max capacity 2 TB vm. but I can't create a virtual machine more than 256 GB. what I am doing wrong?

  Thank you

  You probably use a block size of 1 MB, which limits a single HDD 256 GB.  You will need a larger block size

  1 MB = 256 GB

  2 512 GB

  4 MB = 1024 GB

  8 MB = 2048 GB

• The list of all virtual machines to a host group in Virtual Machine port group

  Ladies and gentlemen,

  I would like to create a powershell script to list all my virtual machines to a host, but a group of Machine virtual PortGroup... It is possible...? I see only found Internet see the VirtualPortGroup of the host...

  Thanks in advance & looks

  All your VMS have a mapping single portgroup or it not with multiple NICs on different port groups?

  If they are all the same, then the following should work:

  Get-VM | Select Host, Name, @{N="PortGroup";E={$_.NetworkAdapters[0].NetworkName}} | Sort PortGroup, Name, Host
  

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://Virtu-al.NET

• The list of all virtual machines in a Datacenter

  Hello

  I have several data centers in the vCetner and I want to list virtual machines in a perticular Datacenter. Here is the script I wrote. Apologies, I am an amateur and my script is a mess;

  #! / usr/bin/perl - w
  use strict;
  Use Data::Dumper;
  use VMware::VIRuntime;
  My % opts =)
  Data Center = > {}
  Type = > "s =",
  help = > 'enter the name of the data center. "
  required = > 1,
  }
  );
  OPTS::add_options (%OPTS);
  OPTS::parse();
  OPTS::Validate();
  Util::Connect();
  my $dc = Opts::get_option ('Center');
  My $dc_views = Vim::find_entity_views (view_type = > 'Data center',)
  filter = > {name = > $dc});
  foreach (@$dc_views)
  {
  My $funky = Vim::get_view (mo_ref = > $_-> vmFolder);
  My $funky2 = $funky-> childEntity;
  My $funky3 = Vim::get_views (mo_ref_array = > $funky2);
  foreach (@$funky3) {print $_-> name.} "\n"; }
  }

  When I run above to put it just said 'Discovered virtual machine:

  #perl test.pl - Server < what > - username < whatever - > password < what > - datacenter DC01_ESXi5

  Virtual machine discovery
  It would be great if someone could explain to me where I'm wrong. I don't want a script that I would like to get the desired result, indeed, I want to know where I am going wrong in above script. I find it extremely difficult to understand the structure of data API vSphere. Programming Perl is not the issue here.
  Thnaks.

  There is a somewhat easier way that browsing the inventory tree.

  If you just want to entities in a data center, you can use begin_entity in your find_entity_view* calls.

  #! / usr/bin/perl - w

  use strict;

  Use Data::Dumper;

  use VMware::VIRuntime;

  My % opts =)

  Data Center-Online {}

  type-online "s =",

  help-online "Please enter the name of the data center."

  necessary,-online 1

  }

  );

  OPTS::add_options (%OPTS);

  OPTS::parse();

  OPTS::Validate();

  Util::Connect();

  my $dc = Opts::get_option ('Center');

  My $dc_view = Vim::find_entity_view (view_type-online "Data center"

  filter-online {name-online $dc},

  Properties-online ['name']);

  Don't Die "No data center named"$dc"found!" unless $dc_view;

  My $vm_views = Vim::find_entity_views (view_type-online 'VirtualMachine', begin_entity-online $dc_view).

  foreach my {$vm (@$vm_views)}

  Print "vm:". "." $vm-> name. "\n";

  }

• The list of all virtual machines by Datastore

  Hello

  At some point LucD posted the following answer in another thread http://communities.vmware.com/thread/293395

  Get-Datacenter | Get-VM | %{$vm = $_Get-Datastore -VM $vm | %{$vm.Name + "-" + $_.Name} } | ft -AutoSize

  But on my end, I can't do this job, I get the following error:

  You must provide an expression of value on the side right of the '-' operator.
  On line: 1 char: 41
  + Get-Data Center | Get - VM | % {$vm = $_Get - < < < < Datastore - VM $vm | % {$vm.} Nom + «- » + $_. Name}} | FT - AutoSize
  + CategoryInfo: ParserError: (:)) [], ParentContainsErrorRecordException)
  + FullyQualifiedErrorId: ExpectedValueExpression

  Thanks for your help,

  
  

  There is a missing semicolon. It should be:

  Get-data center | Get - VM | %{$vm = $_ ; Get-Datastore - VM $vm | % {$vm. Nom + «- » + $_. Name}} | FT - AutoSize

• The list of all the virtual machines of an organization

  Hi all

  I use .net api for vcloud. I need the list of all virtual machines of an organization. How I do that?

  Kamal

  Hello

  A paralytic can contain several virtual machines. Once, you get the use of vApp, the GetChildrenVms() for the confined list of the VM.

  VAPP vapp = Vapp.GetVappByReference (customer, vAppRef);

  foreach (VAPP vm in VAPP. {GetChildrenVms()})

  Console.WriteLine ("" + vm.) Reference.Name);

  Console.WriteLine ("" + vm.) Reference.href);

  }

  Creating a paralyzed man from a vAppTemplate will contain the same number of VM contained in a vAppTempalte.

  If the vAppTemplate contains 3 VM inside. VApp created using the vAppTempalte would also contain the same 3 VM.

  Ex: If the Ex vAppTempalte: WebApplication-vAppTemplate contains a DatabaseVM and AppServerVM.

  VApp created from the Ex vAppTemplate: WebApplication-VAPP will also contain a DatabaseVM and AppServerVM.

  Kind regards

  Rajesh Kamal.

• Licenses to create a virtual machine is second with more than 8 cores?

  So, we have a machine with 4 physical Sockets with 16 cores on each. We bought 4 licenses of vmware's standard. Now, we saw early on that the number max of hearts that we assign to a virtual machine was 32, which isn't really a big problem, 32 is a lot for our needs. So we have a 32 core virtual machine running and some other smaller, but now when I try to create another virtual machine with more than 8 cores it tells me that I have insufficient licenses.

  Can anyone provide more information on that? If I can create a virtual machine with more than 8 cores, why I can't create a new one?

  He said authorized to 4 physical processors, so it's ok, it's using your Standard licenses.

  During the 60-day trial, you could create more large virtual machines, because the 60 days run with Enterprise Plus features. Now that you are using the standard license, you can create only 8 vCPU VMs.

  Solution:

  You should spend 5.5 ESXi. Your license will also work for 5.5 and you'll be able to create virtual machines with up to 64 vCPUs.

  Concerning

• need to vmdk with more than size of 2 TB

  Hello

  I install ESXi5 on 2 x 72 > RAID 5 and create VMs on it (2008), now I have to create vmdk and assign it to this virtual machine with more than 2.5 TB of size.

  I creat new RAID set and now I have data store with 3 TB space, but I can't to creat 2.5 or more to vmdk

  How can I create?  How can I activate the RAW Disk Mapping on the local storage?...

  you will not see local hard drives, it is already in the RAID, then only you can see the raid volume. Which is given below

  MPX.vmhba2:C0:t0:l0<-- disk="">

  MPX.vmhba2:C0:t0:l0:1<-- partition="">

  MPX.vmhba2:C0:t0:l0:2<-- partition="">

  It is not recommended to violate the recommended settings and rules given by vmware, it will raise many problems and if it is in production you will be screwed. On the thing you can do, is to create dynamic disks and create a split volume.

  http://www.Techotopia.com/index.php/Creating_and_Managing_Simple_and_Spanned_Volumes_on_Windows_Server_2008

  If you still want to go for RDM local pause, the RAID and see if it detects the ESX or not and if you can see the individual disks and if you are able to make RDM with these discs, then back to the VM will intervene only individual HDD so no raid and protection? So it is very risky

• Query to find records with more than 2 decimal places.

  I have written the below query to find records with more than 2 decimal places, but it is returning records with decimal places 1 & 2. 
  The datatype of the AMT column is NUMBER (without any precision).
  
  SELECT amt  FROM amount_table
   WHERE substr(amt, instr(amt, '.')) LIKE '.%'
         AND length(substr(amt, instr(amt, '.') + 1)) > 2

  Output:-
  
  AMT
  
  * 41591.1*
  * 275684.82*
  * 64491.59*
  * 3320.01*
  * 6273.68*
  * 27814.18*
  * 30326.79*
  131.8413635
  162.5352898
  208.5203816
  8863.314632
  22551.27856
  74.716992
  890.0158441
  2622.299682
  831.6683841
  * 1743.14*
  2328.195877
  3132.453438
  5159.827334
  3.236234727
  37.784
  

  Thanks

  Hello

  user1585440 wrote:

  when i inserted fee_amt as 41591.0999999999  it is displayed as 41591.1 in the output i.e,
  
  insert into amount_table (line_number,fee_amt) values (100,41591.0999999999);
  
  select fee_amt from amount_table  where line_number = 100. this query shows the output as below
  
  fee_amt
  
  41591.1
  
  The fee_amt column has number as datatype (without precision)
  
  Why it is automatically shown rounded off as 41591.1? 
  

  Published by: user1585440 on December 28, 2010 04:50

  You use SQL * more your front end?

  SQL * Plus has a fixed width to display all columns. The default for numbers is 10 characters. If necessary, SQL * Plus will be round a number or the use of scientific notation, to represent the number of the expected number of characters.
  You can use the SQL * more "SET NUMLARGEUR" to change the default view for all the numbers of orders, or "COLUMN" to set a sepcific format in an individual column.
  If you explicitly convert your channel numbers in a query, SQL * Plus adjusts the column width to whatever is needed. For example

  SELECT  TO_CHAR (fee_amt, 'TM')     AS fee_amt_d
  

  "TM" is the default format; You can call TO_CHAR with a single argument, if you prefer.

• How to list all the vm with more than one network card?

  Hello

  Is it possible to only list all my s vm in my environment with more than one network card?

  I tried using the Get-NetowrkAdapter cmdlet, but could not get the desired results.

  Get - VM | Get-NetworkAdapter | Select-Object Name. ConvertTo-HTML-head $a - body "Virtual Machines < H2 > < / H2 > ' | Out-file D:\vms.htm

  Thank you

  Hello, AGFlora-

  Of course, you can do this with the standard as cmdlets:

  ## using standard cmdletsGet-VM | Select Name, @{n="NumNICs"; e={(Get-NetworkAdapter -VM $_ | Measure-Object).Count}} | ?{$_.NumNICs -gt 1}
  

  Or, if you want to get the results a little (or a lot) more quickly, you can use the cmdlet Get-view as:

  ## fast-like, using Get-ViewGet-View -ViewType VirtualMachine -Property Name,Config.Hardware.Device | Select Name,@{n="NumNICs"; e={($_.Config.Hardware.Device | ?{$_ -is [VMware.Vim.VirtualEthernetCard]} | Measure-Object).Count}} | ?{$_.NumNICs -gt 1}
  

  Those are both by selecting the names of virtual machines and their number of network cards.  Then you can direct this output to Export-Csv, ConvertTo-HTML, what you like.  What to do for you?

• Gwetting a list of all virtual machines and used space

  
  I apologize for my very basic question.

  I need to make a file (better if an Excel file) with a list of all virtual machines in a simple 5.x vSphere infrastructure including 2 VMare ESXi 5.x servers and the disk space used (allocated, used) of each virtual computer.

  The easiest way seems to list the virtual machines from the vSphere client and export the list as a .xls file.

  It seems simple, but when I look at the file I see a lot of missing VMs or a large number of missing values for several virtual machines (just the Runts).

  Is this a problem with my vSphere client?

  I tried to create a PowerCli script using the "Get - VM|" Select-object Name"command, but my limited skills will let me extract the value of the used space.»

  Can someone please provide a sample of PowerCli I can just copy and use?

  Is there another way to get the information I need?

  Concerning

  Marius

  .

  Not knowing that if you have configured a cluster or just stand-alone hosts, here is one simple line...

  Get-VMHost-name | get - vm | select name, usedspaceGB

  From there, you can make formatting, get total usage etc.

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

• Win7 Pro XP Mode with more than 4 cores of the processor installed

  There is a small class of Windows 7 users in a particular section.  Leave section A Win7 users with more than the standard 4 hearts of the processor installed, in some cases, several times more.  Or B article Win7 users "legacy Software".  Note that "legacy software" not only old XP/32 software but also includes some advanced technical software for which the latest version is not stable on Win7 or Vista, and which also does not work on any operating system other than Windows.  People who reside in sections A and B, called 'Goblet' hereby shall Win7 Pro XP mode.  However, XP mode currently fails to install the last step with no further comment or recommendation, for all people in the section AxB.  There is a related hotfix KB2519949 which covers the series of chips AMD 8-core Bulldozer.  Microsoft has indicated that KB2519949 is highly specific instance and emits a strong caveat.  The fix may not work and may even be unstable on some systems.  Miscrosoft indicates on page Web KB2519949 further research is necessary.  I need to install XP mode and the Virtual Machine on Win7 Pro with 2 x Intel CPU E5-2620 (24 hearts).  I would accept that XP mode can run on only a subset of my installation of CPU, but only on condition that this does not affect my full CPU installation and proper use on Win7.  This is part of my doctoral research, and the problem has delays.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Windows Virtual PC and XP Mode Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• Start the list of all menu Programs - folder accidentally moved to the desktop

  I just got a new computer with Windows 7.  I accidentally dragged a folder in the "all programs" list in the start menu on the desktop.  I just wanted to create a shortcut, but accidentally moved the folder instead.  How do I restore the folder to the list of "all programs"?

  Hello

  That is not a problem and it is easy to retrieve.  You are going to want to go where the files and folders are stored in your Start menu and the best way to do this is to open your Start menu, go to all programs and on another folder with the right mouse button and choose explore.  This will put you in the location wherever the folders and shortcuts are stored.  From there, just move up a level and move the backrest to the workstation and you should be good.

  For more information, there are 2 folders that make up what you see in the menu start, a common (or public) and a private.  Both get merged to give a smooth.

  The common (public), one is to C:\ProgramData\Microsoft\Windows\Start start\program

  and the private sector, one is C:\Users\\AppData\Roaming\Microsoft\Windows\Start Menu\Programs

  Files above are below hidden folders so you will need to first enable the option to view hidden folders and files, but the right click Explore method is the best way to get there anyway.

  Finally, if you want to create a shortcut to a folder on the start menu, find it and then right click and choose "send to".  Under this menu, you will see an option to create a shortcut on the desktop.

  I hope this helps.

  Good luck & enjoy Windows 7
  Jon

  http://www.insidetheregistry.com

  PS - For future notes, if you make mistakes like that, just press CTRL + Z and it should undo what you did everything in the majority of cases.
  If this message was useful and allowed, please consider the vote and it offers as a response...