Hot to assign the specific name ring?

On all my previus phone, I was able to assign a different ringtone to user diferent, and I knew exactly when my wife gives me the word to the mother-in-law.

Can I do the same thing with my new shiny Atrix 2?

for someone else, you open the contact, but instead of edit, you choose options.

Tags: Motorola Phones

Similar Questions

  • New virtual machine for the model with the specific name

    Hello

    I'm trying to add some model VM to VAPP using recomposeVApp (...). And it works well except that I can not change the name of the virtual machine while recomposing. It takes the name of the model. But how to add VMS to model with the specific name? I use the v1.0 API.

    This is my code:

    ReferenceType vmTemplateRef = new ReferenceType();
    vmTemplateRef.setName ("MyNewVM"); This name is ignored. The name of the model is taken!
    vmTemplateRef.setHref (vmRef.getHref ()); reference to the model

    CompositionItemParamType vmItem = new CompositionItemParamType();
    vmItem.setSource (vmTemplateRef);

    create the type params VAPP recompose.
    RecomposeVAppParamsType recomposeVAppParamsType = new RecomposeVAppParamsType();
    recomposeVAppParamsType.setName (vAppRef.getName ()); The name of vApp. It is ok.

    added the element of the virtual machine.
    The newItems < CompositionItemParamType > recomposeVAppParamsType = list
    . getItem().
    newItems.add (vmItem);

    Task task = vapp.recomposeVapp (recomposeVAppParamsType);

    Thank you

    Hello

    For after this code fragment:

    vmTemplateRef.setName ("MyNewVM"); This name is ignored. The name of the model is taken!

    The model name is ignored because vmTemplateRef is the only reference to the object that will be used for the operation of recomposition. If changing the name it will be always ignored.

    I think that changing the name of the virtual machine template for recompose cannot be done as follows:

    (1) operation recomposeVApp().

    (2) get the recomposed VAPP

    (3) download the children-> VM you want to change.

    (4) change the name of the virtual computer.

    I hope this helps!

  • How to obtain the list of virtual machines in a cluster with the specific name

    Get-Cluster "Group 1" | Get - VM | where {$_.name - eq "owp *"} | Select name

    I've tried to filter the virtual machines with a specific name of a cluster by using a single command line but I am not going do anything...?

    I get results if I just Get-Cluster "Cluster 1' | Get - VM, but I want excluded other virtual machines to help to be enjoyed.

    Use - as instead of-eq

    Get-Cluster 'Cluster 1' | Get-VM | where {$_.name -like "owp*"} | select name
    
  • How to assign the tablespace name local index when converted to INTERVAL

    Hello
    I'm converting a range partition table in the table to partition INTERVAL. The storage space for the tables is GIVEN. After this operation, all the indexes the world and are valid and usable. However, when the next interval partition is created, the local index is also created in the tablespace DATA. How can I make sure that new partitions of the interval for the index will be created them within the existing Index table?

    Thank you
    Murali

    Change the index to specify the desired storage space, and new partitions will be created there.

    ALTER INDEX my_index MODIFY DEFAULT ATTRIBUTES TABLESPACE my_preferred_tablespace;
    
  • Check which table has no column with the specific name number of tables

    Hello

    Inside my diagram I have 66 tables, each column last_update_date. Although all do not have the program_update_date column. The problem is that I want to go through all the tables and tables that don't have the program_update_date column. It should be noted that if the table does not have the column 2 program_update_date query will be used instead of the query 1.

    Query1:
    ----------
    Select last_extract_date,
    TO_CHAR (min (largest (nvl (*last_update_date*, January 1, 10 '), nvl (*program_update_date*, January 1, 10 '))), "DD-MON-YY HH24:MI:SS") mi.
    TO_CHAR (max (greatest (nvl (*last_update_date*, January 1, 10 '), nvl (*program_update_date*, January 1, 10 '))), "DD-MON-YY HH24:MI:SS") my
    of table_names
    Last_extract_date group
    last_extract_date desc order;


    query2:
    ----------
    Select last_extract_date,
    TO_CHAR (min (NVL(last_update_date,'01-Jan-10')), "DD-MON-YY HH24:MI:SS") mi.
    TO_CHAR (Max (NVL(last_update_date,'01-Jan-10')), "DD-MON-YY HH24:MI:SS") my
    of mispa_events
    Last_extract_date group
    last_extract_date desc order;

    Please find the PLSQL code that must be used:

    Declare
    Cursor C_1 is
    Single select table_name from user_tables; table_names varchar2 (240); BEGIN C_1 open; Loop Fetch C_1 in table_names; WHEN THE EXIT C_1% NOTFOUND;


    EXECUTE IMMEDIATE ('select last_extract_date)
    TO_CHAR (min (largest (nvl (last_update_date, "1 January 10"), nvl (program_update_date, "1 January 10"))), "MON-DD-YY HH24:MI:SS") mi.
    TO_CHAR (max (greatest (nvl (last_update_date, "1 January 10"), nvl (program_update_date, "1 January 10"))), "MON-DD-YY HH24:MI:SS") my
    of ' | table_names | »
    Last_extract_date group
    order of last_extract_date desc');


    End loop;
    Close C_1;
    COMMIT;
    End;


    Help, please.

    Thanks in advance.

    Published by: P.Sam on June 14, 2010 17:00

    Try this

    SELECT table_name
      FROM (SELECT   table_name,
                     SUM (CASE
                             WHEN column_name = 'PROGRAM_UPDATE_DATE'
                                THEN 1
                             ELSE 0
                          END) cnt
                FROM user_tab_columns
            GROUP BY table_name)
     WHERE cnt > 0
    

    This will give you all the tables that has no ' PROGRAM_UPDATE_DATE in a column

  • cfinclude query: return the result to the specific line

    I tried to crack this all day and I feel like if I just had a little nudge in the right direction I could succeed.

    I have a query that returns records of some textbooks that are at a specific school. I standardized the database manuals so that the categories of primary, secondary and tertiary subjects are represented by the primary key of this category in its own table. The application loops through the records, I want to go back to the topic (varchar) category that goes with this (digital) key in the table.

    Since Coldfusion will not allow nested cfoutput, I tried to use cfinclude to enter the specific name for the subject category that accompanies the current manual - but what I have until this returns all subjects for school in each row id - they are the subjects of law! but I'm not all, just the right with the good book/record one. Can anyone suggest what I need to do? I enclose the code for the home page and for one of the cfincludes (they are identical, except for the "primary", "secondary" and "tertiary").

    I know I should leave something but I can't understand that. Thank you very much in advance.

    Cow Holy, I managed to do work! Code attached... and thank you so much, everyone! * Phew *.

  • Assign the page file (.vmem) VM a specific file and folder name.

    My AV (Comodo) analysis file (.vmem) VM paging to death (the hosts making it unusable).  I want to assign the file to the SSD and give it a permanent name.  I read that I can attribute the work of virtual machine files directory and this will help you.  The problem is Comodo.  Can I exclude a file or folder of the analysis, but the mutation .vmem file name prevents the exclusion to work whenever I turn off / the virtual machine.  Thanks for any help.  Enjoy, John.

    EDIT: I just restarted my VM and host and then grew up the virtual machine.  He continued to wear the same name of file (.vmem).  It will continue to be this way?

    One option is to add the following parameter to the file vmx of your comments (with comments turned off and closed player).

    mainMem.useNamedFile = "false".

    This will change the behavior to NOT use the named file for the permutation of VRAM.

    If this does not change the behavior, you may need to change the host config.ini file and add the line there instead.

    Personally, for any AV I always exclude my file to the root of the VMS under analysis, given that the files are constantly changing and open, and the files themselves do not contain viruses. This is NOT to say that the customers themselves can not GET a virus inside their own operating system... but the files to your host will not some virus shipped including your AV needs to scan contain.

  • I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

    I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

    You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

  • I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

    I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

    I would get one that has 4700 comments already.

  • How to assign a constant name 'letter' to the USB port?

    My Compaq Presario with Windows 7 has two USB ports on the front and on the back.  I use both to the front to connect a drive hard ext to the back, usb flash drives and a camera. Everytime Iplug in the disk hard ext, the PC assigns a letter to port such as J.  The next time I plug the camera into the same port, the PC gives it a different letter and I need to go back up and reconfigre Norton where to back up.  How to assign a constant name 'letter' to the USB port?

    I think that the previous answer may have been cut off, but they were right. You assign it a letter on the USB port, you assign a letter to the device. With your drive plugged, if you right-click on the computer icon and select manage you will arrive at the computer management screen. Click the disk management icon and you should see your drive listed. Right click on that and you should see a choice to change the drive letter and path. From there, click change and select a drive letter for your device.

  • Assign the PMP license to specific users without TMS

    Hello guys,.

    IM development environment of videoconferencing on my client with this specification:

    -Worm CUCM 11.x

    -Telepresence conductor XC4.0 (only 1)

    -vTelepresence Server ver 4.2 (only 1)

    My problem is im using PMP licenses, no screen. So I really confuse how to assign the license PMP to specific users.

    I already insert the driver's license, like the image below:

    the multiparty license on driver State said: I already have 25 license PMP but assign 0. and he said: if I did a conference call, he used license SMP, so the lack of SMP license error always come. So I need 1 license PMP connection to my user / ext to remove the error warning.

    I can do without TMS?

    If can, please help me with this.

    Thank you all.

    Best regards

    Christophe.

    The recommendation is to use use AD to import users in CUCM and TMSPE to make sure that all the same users are added.  However, you may manually create users in CUCM and TMSPE as long as the details between the two systems are the same, including the address of the video as that will identify the user as long as the host of the CMR.

  • BlackBerry Smartphones how can I keep my 8800 on "Silent", but leave the specific number of rings audible?

    I need help my BlackBerry 8800 ring loudly in the night of specific numbers (I'm in the search and rescue team), but I don't want to not completely defined the "Loud" phone because there are people who call my number by accident at any time from 02:00 through 06:00. Can I set up my phone so that I can keep on "Silent" but always leave a little the number of rings through the audible ringer? How can I do this? I don't mind waking up at 2:00 for an emergency, but not because someone keeps calling me by mistake. Help, please!

    Yes, open profiles and define exceptions in the box advanced for these contacts, you need to pass.

  • Is it possible to assign the DHCP pool to a specific SSID?

    Hi experts,

    I wanted to know if it is possible to assign a DHCP pool to a specific SSID on the Cisco Aironet 1142. If so, what commands do I need to implement?

    Thanks in advance.

    concerning

    Fari

    We can directly assign the DHCP for the SSID pool, we can map the SSID to a VLAN and this subnet VLANS can be configured for the DHCP pool...

    If this client that connects to the SSID will hit him VLAN and then this VLAN the DHCP is reset...

    On the access point, you can configure the DHCP pool or even on the switch or L3 device or server...

    Regrads

    Surendra

  • Add the short name field for specifications in the XSL file

    Hello

    I'm looking for help to see if it is possible to add the short name for the inputs and spare field in a specification of Formulation in the XSL file. If it is possible, how can I do this?

    Thanks in advance.

    Well, CSS is much more locked, by design. So it's a little (or maybe a lot) more complicated.

    Also remember that if you change the CSS schema, and you use the web service contract that we provide for the CSS message, then the approach will probably be different. This means that the web service contract would not support additional XML nodes, unless he expects them.

    If you do not use our web service contract, then you could make changes in the XML in a different way. Can you elaborate on how you receive the message in CSS?

    Basically, if you use the web service method, then you will probably need to use the ExportExtensions method, which is documented in the CSS guide. ExportExtensions allows you to include xml code in a node specific extensibility through managers, which are classes that you configure in the config\extensions\exportExtensions.xml configuration file. It is currently the custom how sections are included in syndication. So you can add your own XML nodes and call you a custom class to provide additional data that you need.

  • How to use the adapter to assign the task to a specific user

    Hi all

    I am currently configuring a task in an approval process, so that it is assigned to a person determined by the organisation of the applicant. I wrote a small method that search the user name for the name of an organization in a file (we might change this later, but it's ok for now) a return, has created a map using this method, but it looks as if I can't map the map returns the value to the user field that the transfer will go.
    I would like someone to help me...

    assignRequestToUser

    public void assignRequestToUser (long plRequestKey,
    long plUserKey)
    throws Thor.API.Exceptions.tcAdministratorAlreadyAssignedException,
    Thor.API.Exceptions.tcAPIException,
    Thor.API.Exceptions.tcInvalidUserException,
    Thor.API.Exceptions.tcRequestNotFoundException,
    Thor.API.Exceptions.tcUserNotFoundException,
    tcAPIException

    Assigns an administrator to apply. This is possible if the request does not have a current Director. The user being affected must be member of a groups assigned to this request administrative privileges.

    Parameters:
    plRequestKey - the key for the request.
    plUserKey - the key of the user to assign administrator
    Throws:
    tcAdministratorAlreadyAssignedException
    tcAPIException
    tcInvalidUserException
    tcRequestNotFoundException
    tcUserNotFoundException

Maybe you are looking for