Hotkey Utility with XP SP2 and L10

Similar Questions

• TOSHIBA Hotkey Utility and Winamp - solution

  I asked question on how yo use Hotkey utility with Winamp. I solve this problem. I have change the Hotkey.exe file. You can download it from [here | http://www.mkysoft.com/dosyalar/HotkeyWinampPatch.zip]. You can find the Readme.

  Hello

  Thanks a lot for this useful info!

• Why Adobe 64 Flashutil is listed as a process in my task with Windows 7 and IE 11 Manager utility

  Why Adobe 64 Flashutil is listed as a process in my task manager utility with Windows 7 and IE 11?    What is and what is its role?

  Thank you

  TomS

  It's an artifact of sandboxing (https://en.wikipedia.org/wiki/Sandbox _ (computer_security)).   The part of Flash Player dealing with untrusted content on the web is running as a low integrity process.  When Flash Player needs more privileges on the system, there is a much smaller medium integrity process called the broker who made these requests on behalf of the low integrity process.  It is a defense in depth mechanism to make it more difficult for an attacker to exploit a crash in a way that allows them to control the larger system.

• Satellite A135-SP4088: need drivers XP for power management and Hotkey utility

  Hello
  I could not find the drivers for the toshiba A135-SP4088, we bought 3 of them to the office and it is almost impossible to use with vista, so we go to XP SP2 and manage to get almost all pilots of the other models, but I can't find 2 utilities that work with this machine, they are:
  Toshiba power management (remember the bulb in the taskbar) :D

  Hotkey Utility (so I can change the brightness of the screen and go to hibernation (Fn + F4)

  I have al the rest works very well, but these two are a real problem, none of the ones I tested worked, some same crash XP and must return to a previous restore point.

  also, I did not install ACPI drivers, are they necessary?, what are those that show I'm looking for? given that the model does not exist in the csd.toshiba.com site.

  Now, how one of the largest manufacturers of laptops in the world can build a such nice computer without drivers for the most common operating system?, can someone explain me this because I sincerely do not understand.

  Thank you very much!.
  Indkt.

  Hello

  You can try after addresses:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  and
  http://209.167.114.38/support/download/ln_byModel.asp
  Maybe you can find the drivers you are looking for here.

  If this isn't the case then give some feedback and we will find another solution

  Welcome them

• Satellite A350 - how to install common Module and Hotkey Utility?

  Any of you know, I started my computer (Satellite A350) Vista and installed XP Professional.

  But when I want to install "Toshiba Hotkey utility" it says that I need to first install the "common Module. So I downloaded it from the Toshiba site (for win XP), but when I want to install it it says "this software utility does not support this system." and the installation ends. So my question is - how can I install or what I need to install to everything be all right?

  I need "Utility Hotkey" for my special keys on laptop.

  PS of course, I have XP oryginal.

  Hello

  Well, I think that's why it doesn't work, this support of the Satellite A350 doesn t XP. On the Toshiba, you can get only Vista 32 bit and Vista 64-bit drivers.

  For what model of laptop have you downloaded the tools?
  In your case, I would try the utilities for Satellite A300. It is similar to yours, and there you can get all of the XP utilities.

  In the worst case, you can use the special keys on XP. :(

• Dot net Frame work 2.0 SP2 and 3.5 Sp1 failed with error 0 x 80070643

  Can you please help me out with the solution for Dot net Frame work 2.0 SP2 and 3.5 Sp1 failures that occur frequently.

  We tried with the dotnet uninstall and update with the last, but still the questions are on the same machine when we have updated with the latest patches released from Microsoft.we use WSUS 3.0 to update patches from microsoft in desktop computers

  Error code : Installation failure: Windows failed to install the following update with error 0 x 80070643:

  Please help with a permanent solution.

  http://support.Microsoft.com/kb/976982

• I have a pc very very slow and I need to top it up with xp sp1, if I do that, I'll be able to get the necessary updates? Can I ignore sp2 and go straight to sp3?

  I have the disc that came with my pc which is sp1. just boot my PC with the floppy in the drive?

  Yes, you can jump SP2 and install SP3 directly. Or integrate your SP1 installation disc:

  http://theeldergeek.com/slipstreamed_xpsp3_cd.htm MS - MVP - Elephant Boy computers - don't panic!

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.

• PC with Vista sp2 I can backup and reinstall on the new PC with Windows 7?

  I bought a new PC with Windows 7 and you want to back up my old PC running Windows Vista SP2. Can I do a total back up and reinstall without jeopardizing the Windows 7? Or y at - it a program that moves from programs for me, instead of a return to the top?

  Hello

  You don't give enough information:

  Read this about the legality of moving from an operating system:

  If the computer/laptop came with Windows Vista preinstalled operating system (Dell, HP, Acer, etc.), this product key provided with your computer/laptop to the OEM license preinstalled and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  Only retail Operating System license that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ______________________________________________

  Years although it was licensed for retail sales of a clone of Vista that you want to move in all probability if boot not that this image contains drivers for the old Vista, not the most recent motherboard on Windows 7 computer.

  And programs need to be reinstalled from the original media.

  See you soon.

• I can't install windows vista SP2 and problem with SP1

  So I installed SP1 with windows update and each update, it says service pack 1 in the list of installation. Second problem, I downloaded the file for SP2 and when I open it it just comes up with the error message "these data are incorrect."

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• I need a list send me Windows based utility of magnification for XP, am a MSN user with vision problems and cannot zoom in easily on what I have.

  I need a list, sent me to my XP Windows-based magnification utilities, am a user of MSN base with vision problems and cannot zoom in with what I have, and the work of the "Magnifier" somewhat well but could use something better.

  Any ideas?

  Hello

  Please refer to the links and check if it helps.

  How to set accessibility features for people who are blind or who have low vision in Windows XP

  http://support.Microsoft.com/kb/308978

   

  Windows XP accessibility tutorials

  http://www.Microsoft.com/enable/training/windowsxp/default.aspx

  Overview of the magnifying glass

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/magnify_about.mspx?mfr=true

  I hope the information is useful!

• Hotkey utility on Windows7

  Hi all, I'm new here, so please bear with me.

  The hotkey utility is available in windows 7? Might me able to get hold of a cheap copy of windows7 to replace Vista on my laptop Toshiba L350, and I am only collecting information about this and am just wondering if the utility hotkey (the one that descends from the top of the screen when you hold down the Fn key) is available in windows 7? I can't be able to find it in the download section?

  Thank you very much

  For Win7 download section you will find under http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp

  Check if it is available for your model of laptop. If this isn't the case, it will soon be available. Satellite L300 is certainly supported for Win7 and it is just a matter of time when you find all Toshiba drivers, tools and utilities for download.

• Equium A60 - cannot install hotkey utility

  HELO

  I have an Equium A60-181and I lost the recovery disc.

  I installed Windows and then started with the suggested order:

  silent acoustic CD/dvd V1.00.005
  V6.0.1_BASIC Acrobat Reader
  wireless lan (atheros) 802 utility. 11a / g, of V3.1.1.51
  cardbus controller pci-1620 TI ultramedia pilot V1.0.0.9
  Toshiba configfree V4.60.08
  Console V3.04.00
  controls V3.05.0902
  chipset ATI + display driver V6.14.10.6430
  InterVideo windvd V5.0B11.288 - SRS

  and when he gets here, I'm trying to install: toshiba hotkey utility for display V1.00.03SA
  the installer says:
  "Driver not found!" This configuration will end. "

  Of this, I can't install any of the Toshiba tools: Pc Diagnostics, energy saving and Toshiba Utilities

  What if I'm doing wrong? What could be the missing driver? I installed EVERYTHING that has been proposed in the list and he did repeatedly reformatting.

  Thanks if anyone can help!
  Pablo

  Hello!

  Normally before you start to install the Toshiba Utilities, all drivers must be installed for the hardware so you have already installed the display driver? You may notice yellow exclamation in Device Manager?

  Check it!

  Good bye

• Satellite A60 - Hotkey Utility Driver not found

  Hello

  I had to do a clean reinstall of Windows XP, Service Pack 2 (not recovery discs) on the A60.
  I reinstalled all the drivers in the order on the list to install it, but when I try to install the Hotkey utility for display it stops and reports "driver not found".

  I have tried to install everything but the end upward with no FN keys, can not change the brightness or volume in fact that I did not sound at all!

  Can anyone help?
  Robin is soon

  Hello

  I am not sure what the problem may be, but as I see in the statement of the facilities is written:
  ...
  Toshiba hotkey utility for display V1.00.03SA
  Toshiba hotkey utility V1.00.08SA
  ...

  Did you follow this order?
  Try please install Toshiba hotkey utility V1.00.08SA at the beginning and then Toshiba hotkey utility for display V1.00.03SA.
  After doing this installation utility V1.00.07SA TOSHIBA.

  MI is logical to install hotkey utility first.

  Please post the result.

• Upgrading the Toshiba with Vista SP2 product recovery disks? (32-bit)

  Is it possible to upgrade my installation cd (I have an ISO of it file) with Service Pack 2?

  The original disc is 32-bit edition, no service pack. I ask because I think it is unnecessary to wait 2 more hours each time when I reinstall the system to service packs to be installed: s

  Any help appreciated,
  Greetings from Poland - Wyso :)

  Hello

  > Is it possible to upgrade my installation cd (I have an ISO of it file) with Service Pack 2?
  I think that this is not possible because the iso file is a package that cannot be opened again.

  But it is possible to install the OS by using the recovery disk.
  Then to install SP2 and then to create an image of the C partition.
  I did it by using the utility of Symantec Ghost.
  I create an image of my C partition, and is that something goes wrong I can retrieve the unit by using this ghost image file

  Welcome them