How are device LUN identified by disk?

Similar Questions

• Files of the FVO, how are the disk file stored?

  The OVF format must be a file format independent of platform for the delivery of virtual machines between virtualization systems different.

  I guess that there is a standard how do has for example the VMX file out of this and to understand how read, but what of the disk to ESXi file? From what I saw there could be a with the OVF *.vmdk file, but how this is handled on another platform of virtualization? (Since I assume also that the flat.vmdk file isn't a total area for the sector of raw disk file?)

  Take a look at the specification at http://www.dmtf.org/sites/default/files/standards/documents/DSP0243_1.1.0.pdf to see if that answers your question.

  5.2 virtual disc formats
  OVF does not require any specific disk format to use, but to conform to this specification of the format of disc must be given by a URI that identifies a unused specification on how to interpret the format of disc. The specification should not be readable by machine, but it must be static and unique for that URI can be used as key by reading an OVF package software to determine only the format of the disc. The specification must provide sufficient information so that a person skilled in the art can correctly interpret the format of disk for reading and writing data to disk. It is recommended that these URIS are resolvable.

  There are also a lot of other links to specific documentation for the OVF format to http://en.wikipedia.org/wiki/Open_Virtualization_Format

  André

• How to get LUN ID?

  Hello

  How can I get the LUN ID, when I run the script below, it runs successfully, but LUN ID shows empty.

  Help, please.

  Get - VM crpt01 | Get-hard drive |

  Select @{N = "VMName"; E={$_. Parent.Name}},

  @{N = "HDName"; E={$_. Name}},

  @{N = "Datastore"; {E = {Get-Datastore - VM $_}},

  @{N = "NAA"; E={$_. ScsiCanonicalName}},

  @{N = "Monday"; E = {$_parent.} RuntimeName.Split(':') [3]. Trim('L')}} |

  Export Csv C:\test001.csv - NoTypeInformation

  Take a look on vNugglets: get drives of VM and RDM using PowerCLI and see if it looks like what you're trying to do. It uses the display method which is usually much faster than the cmdlets from the example of the first.

  VMware KB: identification of the virtual drives pointing to Raw Device Mappings (RDMS) gives an example how to get just the RDM disks using the - DiskType 'RawPhysical', 'RawVirtual' hard disk Get parameter

• How to remove unmovable files in Disk Defragmenter.

  My desktop is a window XP (32 bit), during the Disk Defragmenter, I noticed there are 2 green bands of unremovable files in the rectangle which is box occuplying free space (in the Center), how to delete to free up disk space on my PC. Help of PSE, thanks.

  Gary

  These files are not unremoveable, they are irremovable. These are active files.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• How are added to my network WPA2-PSK authentication settings? I need to log on to my place of work.

  How are added to my network WPA2-PSK authentication settings? I need to log on to my place of work.

  original title: WPA2-PSK

  tblack1970,
  Thank you for visiting the Microsoft Answers community forum.

  This should be something that your wireless adapter on your computer supports, or does not work.  It is not a feature of Vista, but the network hardware.  When your wireless adapter on your computer sees the router which has the active Protocol, it must ask the key and once offers you the key, it needs to connect.  If you do not see this option for your network card, then you should contact the manufacturer.

  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#ECC
  What are the different wireless network security methods?

  If you plan to have a wireless network, you must configure the only people that can access your choice. Here are a few options for the security of wireless networks.

  Wi - Fi Protected Access (WPA)
  WPA encrypts information and it checks to make sure that the network security key has not been modified. WPA also authenticates users to ensure that only authorized individuals can access the network.

  There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards, but it might not work with the older routers or access points. WPA2 is more secure than WPA, but it will not work with some older network cards. WPA is designed to be used with an authentication server 802.1 X, which distributes different keys to each user. This is referred to as WPA-Enterprise or WPA2-Enterprise. It can also be used in pre-shared key (PSK), where each user has the same passphrase. This is referred to as WPA-Personal or WPA2-Personal.
   
  Wired Equivalent Privacy (WEP)
  WEP is an older network security who is still able to support older devices, but it is not recommended. When you enable WEP, you configure a network security key. This key encrypts the information that one computer sends to another computer on your network. However, WEP security is relatively easy to crack.

  We do not recommend the use of WEP. WPA or WPA2 are more secure. If you try WPA or WPA2 and they do not work, we recommend that you upgrade your network card to those who work with WPA or WPA2.

  Authentication of 802. 1 X
  802. 1 X authentication can help improve the security of 802.11 wireless networks and wired Ethernet networks. 802. 1 X uses an authentication server to validate users and to provide network access. On wireless 802. 1 X can work with key Wired Equivalent Privacy (WEP) or Wi - Fi Protected Access (WPA). This type of authentication is typically used when connecting to a network of workplaces.
   
  Let us know if you need additional assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  Hello

  Please follow instructions on the link below to see if the recovery discs are available for your laptop:

  http://support.HP.com/us-en/document/c00810334

  Paul

• How the device select radius-server

  Hi guys,.

  We have the existing Ganymede configuration to form our devices and server ACS 2 did. the acs server are managed with other suppliers that the acs server is on their site. Now intended to manage the acs server. We installed a new server CSA of our location, we have thousand of the devices, if we move to the new server we just add the acs unit 2 Server? the new acs server will be are able to connect to the device? How a device chooses which acs primary or secondary server?  Please notify.

  Old configuration

  AAA new-model

  AAA authentication login vtymethod group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local authenticated by FIS

  AAA authorization commands 0 default group Ganymede + local authenticated by FIS

  15 AAA authorization commands default group Ganymede + local authenticated by FIS

  AAA accounting send stop-record an authentication failure

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  Ganymede IP source-interface Loopback0

  RADIUS-server host 10.x.x.x

  RADIUS-server host 10.x.x.x

  New config

  AAA new-model

  AAA authentication login vtymethod group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local authenticated by FIS

  AAA authorization commands 0 default group Ganymede + local authenticated by FIS

  15 AAA authorization commands default group Ganymede + local authenticated by FIS

  AAA accounting send stop-record an authentication failure

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  Ganymede IP source-interface Loopback0

  RADIUS-server host 10.x.x.x

  RADIUS-server host 10.x.x.x

  RADIUS-server host 100.x.x.x<-->

  RADIUS-server host 100.x.x.x<-->

  Hi m.,.

  N ° not round robin.

  It checks the first IP address. It checks only the following IP address if one has failed.

  I hope it's clearer now

  Rating of useful answers is more useful to say "thank you".

• How are mobile and tablets layouts using the new sensitive update?

  I'm trying to decide if I want to apply the new update of reagent Muse and risk dealing with software problems and a learning curve, or if I should just continue with the older version. I can't find enough information tutorial to tell me exactly how this will work.  I hope that this question will make sense and thanks for any help:

  I'm working on a site that I had designed to "hack" a significant effect using lever of QooQee of page layout, so I've already compressed and versions mobile site that appear as versions of the homepage - Minies, but adapted to a more narrow screen.   As a reactive office site, it works 'just ok', but could certainly be improved.   Mobile and tablet of sites, because they are static, fine work and are made up of the way I want them to be.   But I don't know how the new program will result in these versions. I always 'shall' separate layouts for Tablet and mobile, or will/can they now be included in a site of unique, primary, sensitive desktop using different views breakpoint?

  If, then, a much more important question is how various devices with screen/resolutions sizes hen will use these alternate provisions: to decide WHAT specific breakpoint display is used for mobile and tablet devices, respectively and in general?  Or the CAMERA decides what breakpoint view is used, based on the screen resolution or size of the screen or something else?

  With the old Muse, I am currently able to dictate exactly how an overall composition to appear on ANY tablet or mobile - even if the page layout design width does not match the device width or to the browser - because WHAT THE DESIRE COMPOSITION SCALES TO FILL the SCREEN, no MATTER HOW WIDE MY setting PAGE IS.  Can I still expect this behavior, or I will now compose layouts even more in order to ensure that the composition looks good on any possible device? 

  Even with a good design "fluid", it is inevitable that there will be intermediate points during which a page layout is less ideally composed from an artistic point of view.   I don't care if a user "cross" these points while scaling a browser, but, ultimately, I WANT to BE CAPABLE OF DICTER EXACTLY HOW YEAR COMPOSITION WILL APPEAR ON ANY SCREEN TOTAL.

  Again, hope this is logic, and thank you for any idea.

  You can create a 'hybrid' site of fluid layouts fixed device and stop points. Muse paid tribute to previous how to design the page layout. Technically, you just set your breakpoints to the more narrow view that you expect to have a desktop computer, the default 960, for example.

  David

  Creative muse

• How to install the OS, recovery disks give "CDBOOT: could not find the BOO." Error MGR ".

  My computer, a Pavilion a6110n (a few years), had to have the hard drive erased because of a virus that has deeply infected in Vista Home Premium. To reinstall Vista, I tried using the recovery discs HP than the guys at Best Buy is when we bought the computer.

  At startup (with the CD group first in the boot order), I get an error-"CDBOOT: cannot find the BOO." BISHOP. "

  What could be my problem? I tried other discs to restore to another brand of computer (also made by Best Buy) and I get no BOO. MGR error, only an error specific to the manufacturer I can only assume means that I can't use the floppy drive in my HP. could my Best Buy-made restore disks to be missed altogether Boot Manager? If so, how are we dealing with the repair without spending money?

  Here's a noob question, too: these recovery re discs - installed Vista or I'm completely screwed? Thanks in advance for your comments

  You can order the HP recovery media for about $20. Indeed, the set formed by Best Buy seems very defective. Dynex is a cheap brand of the DVD and for the price, I bet what they charged for this ' extra service ' they should have used a good quality brand.

   

  BTW, you could have done the same thing for free, apart from the cost of a few HP machines with the software installed to burn a set of recovery DVD.

  You could also "disappeared" the clean hard disk by starting on HP Recovery Manager to a formatting and reinstalling.

• How many devices can I install the desktop version on?

  How many devices can I install the desktop version on?

  subscriptions and single user adobe licenses allow up to two simultaneous activations.  you are in the facilities and unlimited downloads.

• RAW device to the virtual disk migration

  When trying to cold migrate a raw disk device VM of EVA Storage to a virtual disk in a DS8100 it fails with the following message: "incompatible device backup specified for device ´0´" the size of the LUN is Go 510 and appaers message when 100% is full 3 hours laters. I set the block size 2 Mb in the data store, but when I try to migrate a RAw of 100 GB on the same VM migration works very well and I use the new virtual disk without problems.

  This could be a problem with the maximum of storage migration?

  Could you tell me if you know another way to migrate this raw device on the virtual disk?

  TKS!

  Have you tried VMware Converter inside the guest who has the backend RDM?

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• How many devices can I have in icloud

  How many devices can I use with iCloud by using the same apple ID?  How can I add new devices to my account?

  Your Apple ID can be associated with up to 10 devices and computers.

  http://www.Apple.com/icloud/Setup/

• There is NO selection update software on my phone! How are Iphone 3 # IOS updated? It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  There is NO selection update software on my phone! How are Iphone 3 # IOS updated?

  It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  The model number you have listed is an iPhone 4, which can be upgraded to iOS 7.1.2. To have the option to update software on the phone, you need at least iOS 5, otherwise you will need to use iTunes on your computer sync to perform the upgrade.

• How many devices can I connect to an Apple ID

  How many devices can I connect to an Apple ID

  As much as you want me to know.