How are these similar colors?

Similar Questions

• HP 6600: how are you 933xl color of HP 6600 (printhead are wider to fit XL instead of cartridges std)

  How are you 933XL cartridges in the HP 6600?

  Which came with the printer are 933 3 std color cartridges and a 932XL black.

  There are messages on the right and left of the printhead which seem to be not moveable, so I can not understand how to make it larger to fit all 4 cartrdiges as large high capacity XL.

  I am breath through STD color cartridges and you want to use the C/M/Y 933XL

  Thank you in advance.

  While the black 932xl cartridges are physically larger that the 932 standard they replace, the cartrdiges of 933xl of color are the same size as the standard 933 cartrdiges.  933xl cartrdiges have more ink - color xl cartridges are rated up to 825 pages compared to 330 for standard cartridges.  They deliver 250% page 142% of the cost.

• The safer browser and e-mail provider & how are these viruses and malware problems to spread?

  I use Google Chrome and Internet Explorer 10 to surf the web. In my view, they have everything to lose if their browser has problems of security, however, makes also large target. A Yahoo email account has been hacked. How, I don't know. Then the spam was sent to all my contacts. I have used e-mail accounts, with all programs of well known web site outside of Yahoo. Hotmail/Live, AOL, Gmail, mail, and inbox.com. They all seem to work. With spam being a problem on Yahoo & Hotmail. For me your browser must protect users against viruses and software malware and other things of that nature. Because surf the Internet, it's what you want to do with a browser. How is distributed most of these things? What is the e-mail provider and a more secure browser.

  Hi dough.

  I agree with Bugbatter that even if all the major Webmail as some antivirus e-mail scanning, but you cannot rely solely on them. Also, it is not a question of what browser or webmail is more secure or better. Don't forget a website or a program can be infected sometime or another. However there are a few things to you, as a user, can do to protect yourself. As BB says above. It is your responsibility because it is your PC, your account and your identity that you want to protect.

  1.) keep your operating system (including your browsers) and the security of programs up to date. There are programs such as Java, Flash, Reader which are important targets by malicious software so that they can be used to infect your computer. If you can, avoid them, otherwise, leave enable automatic update so that any security flaw can be fixed in time.

  2.) use a strong password. Combination of 10 or more letters, numbers and symbols using capital letters too. Use different passwords for all your sites; emails, social, banking and hang them on a regular basis.

  3.) don't be click happy. Do not open unknown emails and if a friend sends attactments, call him or her or answer her and ask if he or she send these attactments. If something seems fishy, it's probably so don't click on don't it. Do some research first. Have a special folder where you can download your attactments and scann again. Do not open it directly fron the site, and if possible have a secondary scanner to get a second opinion. Malwarebytes is a good choice.

  In open wifi hotspots) 4 (coffe shops, airports) switch your firewall to 'Public' if possible and avoid banking on cibersites using a public PC.

  5.) have a backup strategy. Make a regular backup of your system and important documents (files, photos, emails, videos, music, Fav). Win 7 and Win 8 joined, I understand, a very good program to do this. There are other third-party programs that can also make an image of your HARD drive regularly.

  I think those are the mayor points to be relatively safe, but I imaging of other members of this forum can add a little more.

• The Oracle Forum - how do these changes work?

  Hello
  
  I work in an environment where many things is made unavailable for me as the FAQs in this forum. This forum has changed tremendously and slowed down considerably. I'm unable to determine that it should aim at Oracle.
  
  Meanwhile, is anyone know what mean answered and unanswered questions? How are these applied? What is the meaning points did?
  
  Kind regards
  Nancy

  Hi Nancy
  Yes, I noticed that the speed has improved. Sometimes it pays to complain! :-)

  It is good to see you back and thanks for the good words.

  By the point system is a way to get your icon in the light of the level of experience you have. The questions that you answer the more points you get so your icon will change. I think that Oracle would like our revealing icons of other users as to how dependent, they may be on our responses. Does that help?

  Concerning
  Michael

• In the book module page numbers are the same color as the text of the title. How can I change the color of the page numbers in black?

  In the book module page numbers are the same color as the text of the title and I would like that the numbering of the pages to be black. How can I do this?

  Click the mouse cursor exactly on a Page number where it appears on a page.

  Set the color of the characters in the Type Panel.

  "Type" parameters are related to each field Photo text, the text of the Page text, text number of pages, which allows you to set the Style of individual text for each of these three "areas".

• How to make the color of ScrollBar that are created using the css code is displayed in Windows 8

  I wish I could understand how to get the color of ScrollBar that are created using the css code appears on my web design theme games. But I can't see them in Windows 8. Is there something that I need to enable to see colorful scroll bars? I'm used to be able to see them on my Windows XP computer. It is important for me because a lot of people like models with colorful scroll bars.

  Open the Tools menu and turn on "Compatibility view" to do.  Note that this works only in the desktop version of Microsoft Internet Explorer.

• PANTONE + does not match the previous Pantone spot color chart. I have several customers who are using spot colors in logos etc and now these colors are a mess. Can I get and use the old color for Illustrator books?

  PANTONE + does not match the previous Pantone spot color chart. I have several customers who are using spot colors in logos etc and now these colors are a mess. Can I get and use the old color for Illustrator books?

  Well, the spot color has not changed, but the way they were simulated four-color changed, they now use color management to get to the nearest ink possible task.

  Here is some info:

  https://helpx.Adobe.com/Illustrator/KB/PANTONE-plus.html

• How can I get my Gallery of open filters?  I need glowing edges and sketches (charcoal) are these add ons? I plan creative cloud

  How can I get my Gallery of open filters? I have need of scarlet contours and scketch (charcoal) are these add ons I plan creative cloud.

  Hello

  To get the glowing edges and the sketches, do not download any extra on addition.

  Once you have downloaded the latest version of Photoshop, open an image, go to filter > filter Gallery.

  Here, you will get the option glowing edge and sketch.

  Please let me know if it helps.

  Kind regards

  Tanuj

• Are these real vulnerabilities and if yes, how can I fix them?

  Several identified via a Kasparsky Security Scan - "vulnerabilities" are these serious questions or not?  If so, what should I do to solve?  I use Windows XP SP 3 and, above all, the Firefox browser, although always use Internet Explorer, from time to time.  I use Microsoft Security Essentials and Malwarebytes Pro, which did not identify malicious software or virus problems (or have the Kasparsky scan).

  (1) C:\WINDOWS\system32\msxml4.dll
  (2) "debugger detected system process.
  (3) ' Autorun of drives is allowed.
  (4) ' Autorun for network drives is enabled. "
  (5) "CD/DVD autorun is enabled.
  (6) "support removable autorun is enabled.
  (7) ' Windows Explorer: showing extensions of known file types is disabled.
  (8) ' Windows Explorer: view the extension of known file types ".

  Thank you!

  Is there a help function of some sort with the Kaspersky product that explains these messages?  And does not offer the KSS to 'correct '?

  These elements are "vulnerabilities" because they allow a behavior potentially at risk, although some of them appear to be riskier than others.

  For example, many business computers are configured to prevent the operation with removable media (aka flash readers) to prevent malware carried on a USB key to infect computers as soon as you plug it autorun in.  On the other hand, it seems far less likely to me that CDs and DVDs would be as risky as flash drives.  See http://lifehacker.com/5858703/disable-autorun-to-stop-50-of-windows-malware-threats
  Some other entries are mechanisms that malware could use, even if the item itself is not malicious software (msxml4.dll and debugger process system).  For example, in 2006, Microsoft released a security fix for msxml4.  If you did not keep your system up-to-date by using Windows Update, maybe you have the old version of this.  Or maybe Kaspersky think that there is a new problem.  See http://technet.microsoft.com/en-us/security/bulletin/ms06-071

  If the display of the extensions of known file types is disabled, the malware can dress up with an innocuous name.  For example, a file named Readme.txt is obviously some sort of information.  If the display of file extension is disabled, it will appear as simply readme - and might actually be readme.exe, so if you clicked on it, instead of opening a file in Notepad for you to read, you can proceed with the installation of some malicious software.

• How to remove the colors of the table of characters fill colors

  Hmm. I got to ask questions of the pages for Mac screen, but it looks different from what I've seen in the past. So, I hope I'm in the right place. Over time, I selected some colors in the color popup in the character frame and saved.  I tried to change a color by changing the opacity. Then I tried to save this color has changed for the lines at the bottom of the pop-up window.  It did not work. I would have saved the color that appears in the large square on the left.  Anyway my question is how to remove these incorrect colors lines down.

  I know that this little logical so I am attaching the screenshot I'm talking about.  I want to remove the three red squares, two on the line and the other on row down all in the middle of the screen.

  

  Thanks for your help.

  EHW

  HI ehw.

  This is the right place. He underwent extensive design of the overnight changes.

  don't think that you can "erase" the colors that you place in the custom palette, but you can replace them easily using the same method the first time:

  Set up color using the sliders or the color space, and then drag the big box and drop on the color you want to replace.

  Here I replaced two red with white.

  

  Interesting change of color of the header between the two images. Both are screenshots, the left using shift-control-command-4 then pasted from the Clipboard to an empty page in the Pages, the right is the actual color palette. Both were then with SHIFT-command-4 to maks a file that was then inserted here.

  Curious.

  Kind regards

  Barry

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.

• How can I change/color/font size of tab independently controls?

  How can I change/color/font size of tab independently controls?

  When I change one of these attributes, it applies to all the controls on the tab...

  Thanks for the help!

  christophe69000 wrote:

  How can I change the /color/font of the tab size controls independently?

  When I change one of these attributes, it applies to all the controls on the tab...

  Thanks for the help!

  Tim has manipulated the colorful side of the tab of this Q.

  If you ask about the text than the tabs labels, they are all the same.

  If you really want and can settle their definition at run time, you can use

  Advance > Layout tab > image only and use your own image to make it look like different sizes and fonts.

• How to change the color of the navigation bar based on other

  I need to change the color of my navigation bar, on my page. I already did on my other three pages. With the help of http://work.smarchal.com/twbscolor/scss/9b59b68e44adecf0f1ecdbff0 , but now I have made a new page I don't know how to change the color of the navigation bar to match exactly the three other pages. Please help.

  Bootstrap CSS is read-only and should never be changed.
  

  Creating CSS code on each web page is redundant & can cause inconsistent styles.  Use rather a stylesheet external called custom.css including all your HTML files are linked. In this way, when you make changes to your custom.css file, these styles will automatically apply to all pages of the site.

  Both inside theTag under the Bootstrap CSS code, add a link to your custom.css file.

  Nancy O.

• How to change the color of the same colored sections of an image according to the colorpicker. ?

  Hello.. How are you all... ?

  
  I do a small program to change the color of these sections of an image that have the same color, according to the chosen of the colorpicker color...

  
  Say of the colorpicker, we selected a color, and then mouse click on the image event changes the color of those parts of the image that have the same color as the selected portion (or pixel) to the selected color... If we have selected FF0000 in the colorpicker and then clicked 3300CC color pixel in the image. This should change the color of all pixels of color-3300CC in the image...

  I have a colorpicker [colpickr] and a movieclip [mc] the image on the stage. I created a bitmap of the same image (imag1) using the code. Select the color in the colorpicker and a mouse click on the movieclip (here I used getPixel) will change the color in the bitmap image to the selected (with setPixel) color. I have two images; one is a movieclip (inorder to add the listener for the click event), and one is a bitmap (to set the setPixel property). But I need a single image.

  Please help me with this... Below is my code (horrible)...

  import flash.events.MouseEvent;

  Import 12345678910111213import;

  import flash.display.BitmapData;

  import flash.net.URLRequest;

  import flash.display.Loader;

  var c = 0;

  var myBitmapData:BitmapData;

  var bm:Bitmap;

  colpickr.selectedColor = 0xffffff;

  preLoader var;

  var urlReq;

  var preloader_img:MovieClip;

  preLoader = new Loader();

  preLoader.unloadAndStop ();

  urlReq = new URLRequest ("imag1.jpg"); I chose the same image as that of movieclip mc
  

  preLoader.load (urlReq);

  preLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, preLoaderComplete);

  creates a bitmap of mc...

  function preLoaderComplete(loadEvent:Event) {}

  myBitmapData = new BitmapData (mc.width, mc.height);

  myBitmapData.draw (mc);

  BM = new Bitmap (myBitmapData);

  addChild (bm);

  BM. Width = mc.width;

  BM. Height = mc.height;

  }

  mc.addEventListener (MouseEvent.CLICK, _onMouseClick);

  Gets the color of mc and affects the color bitmap

  function _onMouseClick(event:MouseEvent):void {}

  var myColor:uint = myBitmapData.getPixel (mc.mouseX, mc.mouseY);

  c = myColor.toString (16);

  for (var i = 0; i < bm.width; i ++) {}

  for (var j = 0; j < bm.height; j ++) {}

  If (myBitmapData.getPixel(i,j).toString (16) == c) {}

  myBitmapData.setPixel (i, j, colpickr.selectedColor);

  }

  }

  }

  }

  Try this:

  import flash.events.MouseEvent;

  Import 12345678910111213import;

  import flash.display.BitmapData;

  import flash.net.URLRequest;

  import flash.display.Loader;

  var c = 0;

  var myBitmapData:BitmapData;

  var bm:Bitmap;

  colpickr.selectedColor = 0xffffff;

  preLoader var;

  var urlReq;

  var preloader_img:MovieClip;

  preLoader = new Loader();

  preLoader.unloadAndStop ();

  urlReq = new URLRequest("z_bitmaps/image1.jpg"); / / I chose the same image as that of movieclip mc

  preLoader.load (urlReq);

  preLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, preLoaderComplete);

  creates a bitmap of mc... ;

  function preLoaderComplete(loadEvent:Event) {}

  BM = Bitmap (loadEvent.target.loader.content);

  addChild (bm);

  }

  stage.addEventListener (MouseEvent.CLICK, f);

  function f(e:MouseEvent):void {}

  If (BM.hitTestPoint (MouseX, MouseY) &! colpickr.hitTestPoint (mouseX, mouseY)) {}

  _onMouseClick (e);

  }

  }

  Gets the color of mc and affects the color bitmap

  function _onMouseClick(event:MouseEvent):void {}

  c = BM. BitmapData.GetPixel (BM. MouseX, BM. MouseY);

  for (var i = 0; i)

  for (var j = 0; j)

  If (bm.bitmapData.getPixel (i, j) == c) {}

  bm.bitmapData.setPixel (i, j, colpickr.selectedColor);

  }

  }

  }

  }

• How to change the color of pre-rendered screen.

  My question is how to change the color of the page that is displayed before a site is fully charged. So let's say I go to a site where the background color is red. Before the end of Firefox loading it will appear as white. Also yes I have known that I have an add-on which changes the default color of YouTube. However the first picture comes on all websites no matter if their background is white or not.

  You can try the userChrome.css code or elegant.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  browser {background-color:#f0f0f0!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file