How batch crop images of different sizes?

Similar Questions

• Batch resize images of different sizes

  Hello

  I hope someone can point me in the right direction.  In the past I've used the script to batch image processor resize images of same sizes, but now I have a few hundred images that are all different sizes.  I would like to resize these images so the long side of each image is resized to a specific size, while maintaining the current proportions.

  I'm using CS5.

  Thanks in advance for any help,

  Adam

  In the image processor dialog box, choose the format, select Resize to fit

  and enter 200 in the height and width of the boxes.

  Click the screenshot below to enlarge

  

  MTSTUNER

• working capital with images of different sizes in the table

  Hello, I have a table with images of different size.  I want to use a bearing on each Panel, but my image is not the same size.  When I roll over the image the first image disappears.  Any suggestions?  I use CS5.5 Show map to the bottom.of page.

  Kappa Delta Pi

  Thank you

  Also I have never been able to use the "Preview in browser" globe icon  I don't seem to be, any suggestions on how to add this?

  A very simple solution is to make a second image that contains the image superimposed on the map. You must have 4 total images for this (all images have the same size):

  1. the plan with no photos

  2 - 4. The card with a unique image on the desired region (i.e., 3 additional images).

  In your access points, you exchange the entire map with the map of the desired region.

• Disjoint working capital with images of different size?

  Each tutorial explains the disjoint rollover images MUST be the same size, etc..  But for the type of photos that I work with, it is impossible to make them the same height.  This site is exactly what I'll do with images of different sizes used: http://www.warmbloods-for-sale.com/HorseDetail.asp?HorseID=21333 & UserID = 1775.  No idea how they achieve this?  Or any ideas on how I can manage the same effect with different sizes in Dreamweaver CS4?

  Do a Google search for Lightbox, litebox, floatbox, or look at the Image Gallery Magic of the seven project.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.com/blogspot.com

• slideshow with images of different sizes (Adobe Muse CC 2014)

  Hello world

  Firstly it should be noted that I use Adobe Muse CC 2014

  Is it possible to create a repeating slideshow (not full screen or Viewer), with images of different sizes, so that when the image is square or portrait or landscape, the image size will be changed automatically depending on the size of the image inside.

  I know that in some widgets, one solution is to select each image and manually set the desired size of each image, but it is not easy when you have for example 50 images.

  Thank you

  You would need to manually go to this, unfortunately we cannot do this without manual work.

  Thank you

  Sanjit

• Foot of logo to several images of different sizes

  Wonder if there is anyone who knows if there is a quick way to add a footer logo to several images of different sizes (which I think is why action is not an option)? / Niklas

  If you place a version of the footer that is wider than the images and the preferences are set as a result he will be fit to width.

  Then you could use the relative size of canvas and align the foot down a select all.

• How I let the user of the page can select images of different sizes when buy a print?

  Hi all!

  I'm currently trying to make a website in Adobe Muse CC 2015.1 that sells prints of photographs, however I would like to ensure that the buyer can select different sizes for printing and also other frameworks of size. How would I do this then it will affect the price results via paypal? This is something Ive been tempting for two weeks researching and haven't found anything, if anyone knows how to do this I really would appreciate it if I said.

  Thank you

  James Tucker

  I think it will be difficult to push the Muse within these limits. Small or greater step towards a solution of real e-commerce (with caddies, counting and paid and all) it is difficult of application skeleton Muse with just a PayPal button sell stuff.

  It is more useful and entirely possible to take a look at the other ways to integrate with a few small to mid-range e-commerce systems that play nice with Muse. MuseThemes has a nice article on this subject, in which they refer to their own connection widgets (like their widgets Ecwid and PayPal ). They mention also to the help of the Shopify buy button. BTW, Qooqee is a more capable Shopify widget !

  I hope this helps.

• How can I print 3 different sizes on one sheet A3 + LR 5?

  I have 3 color images I want to print on a printer A3 + sheet set.  They are all different sizes, 2 portrait and a landscape.  How to make a template to do this please?  I use Lightroom 5. Thank you.

  Used custom package and it worked perfectly.  Once I had the drag each image in the work area and sizing etc. it worked perfectly.  However a problem I have now is how to save this format for any redo a few days after, or I have to start over again?  I notice that once I digress the final 3 to the top of page set up and then return it does not show, only a single larger image.  I recorded the model in "collections", but once I get out of this model and later back I don't see three images created such as I finished it. Any ideas?

  In any case, thanks again!

• How to crop to a specific size

  Hello world. This will sound like a very basic question, but I need a clear method on how to crop to get a specific size in Acrobat DC. I am a printer and from time to time I get clients who send me PDFs of card made from templates word or publisher. Unfortunately, I need these cards one place to send to my tax software and the customer is almost never the original file. My only option is to pan a map and send that. What I need to know is there a way, like in Photoshop, where I can set the dimensions of culture to a specific size rather then just estimate? Have that a box set of cultures to the standard business card size would really help me to know where to begin these cards and end and keep only their properly dimensioned. Im sure it is something relatively simple, but I was not able to find good info on this subject. Any help would be appreciated.

  If you select the crop tool and double click on a page, it will bring up the dialog box to set boxes of Page that allows you to set the top, bottom, values of the harvests of left and right, so with a little math, you can set a specific width and a height.

• How to load images into different frames on a movieclip? And the creation of a clip empty?

  I want to be able to load external images into different frames in a movieclip and then to control inside the code. To do this, I need to know how to create a movieclip empty with a quantity of images can I specify in the code and how to put different pictures on different periods of the movieclip. How can I do this?

  When you create a movieclip in actionscript, it contains an image and there is no way to change/increase.

  You can create a movieclip with several images in the authoring environment and do what you want, but I don't know that makes a lot of sense.

• using steps to resize the image of different size for a standard size

  Hello

  I have a variety of images of different dimensions. Each has a logo in it. Y at - it no way to have the application via an action acknowledge what is the logo and what isn't?

  Thank you!

  Actions cannot use logic. Scripts Photoshop can. But other than grateful name would be a task,

• Script to place an image in different sizes of paper!

  Script to place an image in documentdifferent sizes. Hello all, greetings to all. There is a possibility hereget a nice script that reposition an imageinserted in the document to make it encacheperfectly in sizedocument independent edges? With this feature, I'll be able to create severaltypes of frameworks, effects with mascaras etc... and sopower gives a nice streamlined in my work.

  Exemplo:

  1458482592 - YouTube video

  Please try this version.

  #target photoshop;
  app.bringToFront();
  
  main();
  function main(){
  if(!documents.length) return;
  try{
  var doc = app.activeDocument;
  app.displayDialogs = DialogModes.NO;
  var strtRulerUnits = app.preferences.rulerUnits;
  var strtTypeUnits = app.preferences.typeUnits;
  app.preferences.rulerUnits = Units.PIXELS;
  app.preferences.typeUnits = TypeUnits.PIXELS;
  var aLay = doc.activeLayer;
  doc.activeLayer = aLay;
  if(aLay.isBackgroundLayer) return;
  if (aLay.kind == LayerKind.SMARTOBJECT){
  aLay.resize(100 ,100,AnchorPosition.MIDDLECENTER);
  }
  var docWidth = activeDocument.width.value;
  var docHeight = activeDocument.height.value;
  var LB = activeDocument.activeLayer.bounds;
  var LHeight = LB[3].value - LB[1].value;
  var LWidth = LB[2].value - LB[0].value;
  var percentageHeight = ((docHeight/LHeight)*100);
  var percentageWidth = ((docWidth/LWidth)*100);
  activeDocument.activeLayer.resize(percentageWidth,percentageHeight,AnchorPosition.MIDDLECENTER);
  align( 'AdRg');
  align( 'AdBt');
  }catch(e){
  }
  finally{
  app.preferences.rulerUnits = strtRulerUnits;
  app.preferences.typeUnits = strtTypeUnits;
  }
  };
  function align(method) {
  activeDocument.selection.selectAll();
     var desc = new ActionDescriptor();
             var ref = new ActionReference();
             ref.putEnumerated( charIDToTypeID( "Lyr " ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
         desc.putReference( charIDToTypeID( "null" ), ref );
         desc.putEnumerated( charIDToTypeID( "Usng" ), charIDToTypeID( "ADSt" ), charIDToTypeID( method ) );
      try{
     executeAction( charIDToTypeID( "Algn" ), desc, DialogModes.NO );
     }catch(e){}
     activeDocument.selection.deselect();
  }; 
  

• How to crop images and reduce the size of an image using illustrator?

  Hi friends...

  Could you please help us by answering the question above or that other family of software tools Adobe will help us in this regard.

  Thank you and best regards,

  BioChem Adda team

  To crop an image (by that word people usually mean a bitmaped image these s a photograph) is best done in photoshop, if you want to reduce the size of your file.

  Illustrator has hide the ability to crop an image, but that will not reduce the size of your file everything.

  If your main goal is to reduce the size of the file

  1. Make sure you link do not embed an image
  2. File > Save As > and turn off compatible pdf as which increases significantly the size of your files. You only need pdf compatible, if you plan to place it in InDesign or After Effects.

• Lighbox creation which displays images with different sizes

  Hey,.

  I am trying to build a gallery lightbox in Muse. The thumbnails would all the same size, but the corresponding images have the width/height reports.

  However, the lighbox widgets Muses seem to view all images in the same proportions.

  I tried to implement outside as Lokesh Dhakars Lightbox 2 plugins instead, but I don't know how.

  Can someone tell me if/how I can make this work with the Muses widgets or how do I implement an external lightbox plugin?

  Thank you!

  Do the new hero defining 'Fit content proportionally. This only affects new images added to the publication. Existing images will not change, so do not forget to remove any existing image and add it after changing the setting.

  

• Image overlay with a transparent background - images of different sizes

  Hi guys,.

  I'm new on using the features of recovery and I don't know how to do what I'm looking for, so wanted to seek assistance or advice.

  I have a flow from a Kinect sensor, and I want a small picture of overlay on top. The image I want to overlay is small and so I want only to cover a portion of the power unit. It also has a transparency on the small image, which I have in my overlay.

  I was watching the superposition of screws and found a bitmap overlay called IMAQ - but I think that a bitmap would be no transparency so I'd end up with a white square background on the image that I'm trying to superimpose on my camera feed.

  Is there an easy way to do what I need?

  Thanks in advance,

  Lou

  vascibean wrote:

  I want to import with transparency.

  The following kb should be useful for you:

  Which Image File Formats are capable of transparency in LabVIEW?

  Use transparency in png for LabVIEW Module Vision Development files

  Andrey.