How can do NAT on (internet) outside inside LAN servers using a public IP address?
How can do NAT on (internet) outside inside LAN servers using a public IP address?
Should I using the route?
Lets say that 99.3.81.66 is your public IP address and ISP is on INT G0/0
IP nat inside source list 1 interface GigabitEthernet0/0 overload
IP nat inside source static tcp 10.3.81.6 443 993.81.66 443 extensible
IP nat inside source static tcp 10.3.81.61 80 99.3.81.66 80 extensible
access-list 1 permit 10.3.81.0 0.0.0.255
Int G0/0
NAT outside IP
int g0/2
IP nat inside
Tags: Cisco Support
Similar Questions
-
How can I fix the problem when another computer is using the same IP address with me?
My computer has proven to me that there is another computer using my IP address.
He said I need to contact the administrator.I don't know how to do in this regard. Help, please.Since it's your own home network, it means you are the network administrator. Which basically means that you should have total control on who can and can not connect to internet through this network.
Then, you should have a router somewhere in your House. This is the device that sends the wireless signal. Most likely, it will be connected to a phone jack or cable from the wall, or a modem, depending on which company you get your internet service.
You need to find this device, the router and restart for it. Do the same on your computer. Once both have restarted, try to connect to the internet. The router must have an ID written somewhere on it. This same ID should appear in your network and sharing Center , if you click on "Connect To A Network.
The homegroup is something a little different. A homegroup is really just a collection of your own computers, or in your home. For example, if you had a desktop and a laptop, and I wanted to share the files from one to the other, you should join them in the same homegroup. It has nothing to do with putting on the Internet, just the connection of two computers together. It of good that you set up a homegroup with a password, but won't really help you here.
-
How can I change my internet connection from wireless to wired
Desktop HP Pavilion HPE h8-1017
Windows 7 Home Premium 64 bit OS
How can I change my internet connection from wireless to wired?
Hello
You already have a wired connection to your home? Very simple, just using a CAT5e or CAT6 cable and connect to a LAN port of the modem or router to port #2 (at the back) until you and your machine will:
Kind regards.
-
How can I configure my Internet XP connection so that it will automatically connect to my WiFi (wireless) without asking me the password whenever I connect?
original title: automatic Wifi connectionHello
By default, Windows XP attempts to connect to networks without wires in the following order:
- Available networks that are in the list of network preferred (by order of registration)
- Preferred networks in the list proposed (by order of registration)
- Other networks according to selected advanced settings
Check out these articles and check if that helps:
To connect to an available wireless network
To set up automatic wireless network configuration
5 steps: how to set up your network wireless home
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
-
How can I get the internet active icon to reappear in the taskbar
How can I get the internet active icon to reappear it wont despite doing everything to get him to reappear such as notifications of the tick, display in the task bar and turn into network connections for notification, nothing works. It has disappear intermittently, but came back he refuses now to reappear
Hi Andy MWR.-Remember to make changes to your computer before this problem started to happen?Try the methods that are listed in the article given below to resolve this issue: -
How can I configure my internet settings in win xp pack 3 sev...
How can I configure my internet settings in win served xp pack 3. .IM using D-link router wireless via a prolink modem... plz help me to solve this prlm
Hi Dayankr,
1 - is the first time that you configure the wireless connection?
2. do you have security software installed on the computer?
See the Microsoft articles below and check if it helps.
5 steps: how to set up your network wireless home
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
To set up automatic wireless network configuration
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).
I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.
Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network). It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.
Help.
In Windows Mail, go to select Tools, accounts, your account email, properties, connection. It shows for the connection? Youshould leave this setting not selected, in which case Windows Mail will use the IE connection uses.In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.If everything which withdraws, but you still have the problem, the account may be damaged. Remove account, restart Windows Mail,.then recreate the account.Gary van, Microsoft MVP (Mail)------------------------------------------------------"W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.which none seems to allow me to select a LAN (ISP) simple (without a password).I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging toolto see or use.Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listedabove and to the exclusion of any direct connection to the local network). It works with remote access, so once I have spend that I should be Ok. but I justcannot operate directly.Help.Gary van, Microsoft MVP (Mail)
-
How can I get my internet connection and the life of the battery and its return in the notification area
on the bottom right of my screen?
I tried the properties and to add notifications but it net let me add them...
Hello
1 Please reboot nothing so interfere with this process.
Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
Then, use this link. (The battery is the same method.)How to enable or disable the system tray in Vista icons (there are several methods
and you can to use them all).
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.htmlIf necessary: a Mr Fixit
System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
Restart the computer
http://support.Microsoft.com/default.aspx/KB/945011I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How can I check the internet connection?
How can I check the internet connection after the launching application?
Method or property with the value true or false.
Thank you!
You don't have to see the 2nd answer, discuss blackberry.system.hasDataCoverage
-
How can I find out what version of firefox I use
How can I find out what version of firefox I use
https://support.Mozilla.org/en-us/KB/find-what-version-Firefox-you-are-using
Left thread Firefox Android for Firefox section.
-
How can we regenerated certificate of development mac for future use.
How can we regenerated certificate of development mac for future use.
Probably better off posting it here:
-
How can I determine what profile Firefox 5 is currently using?
How can I determine what profile Firefox 5 is currently using?
Help > troubleshooting information > profile directory: opens showing the file
Copy and paste this code in the Code field in the ' tools > error Console " and click on evaluate to see the location of the profile folder.
alert(Components.classes["@mozilla.org/file/directory_service;1"].getService(Components.interfaces.nsIProperties).get("ProfD", Components.interfaces.nsIFile).path);
- Nightly Test Tools: https://addons.mozilla.org/firefox/addon/nightly-tester-tools/
-
How can I add the speaker notes to a slide using applescript?
How can I add the speaker notes to a slide using applescript? I am able to create slides, add a title and bullet points, but when I try to add the speaker notes, it does not work.
say thisSlide
-set the title
set the text of the object to the default title at "TITLE" element
-create a bulleted list
the text of the object of the item to the default body ¬
"Bullet Point 1" & return & "Bullet Point 2" & return & "Bullet Point 3"»»
-put the presenter notes
¬ the text value of the object of the presenter notes
'' Here is my presenter notes.
How can I add the speaker notes to a slide using applescript?
Maybe like this:
say thisSlide
-put the presenter notes
Set presenter notes to "here is my presenter notes.
end say
-
How can I know if an external drive has been used for Time Machine and what computer it came with too?
I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.
Now I'm trying to figure out which drive goes with which computer
I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.
(1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?
(2) what happens if I would have said yes?
(3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.
All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.
-
How can I find out why my iPhone 6 is using data so
How can I find out why my iPhone 6 is using data so
What do you mean by data? Do you mean using your your wireless provider data allowance, or hear you storage space for files?
See how much storage you have used on your iPhone, iPad and iPod touch - Apple-Support - http://support.apple.com/HT201656
Maybe you are looking for
-
I want to start making videos and do not know which version is the best for my system and my novice status?
-
How to add two .cod files two ethical single file
Hi all I am new to the blackberry development. I develop an inaugural recongnisation application in the use of blackberry http://www.iSpeech.org/ But the problem is that 1: file iSpeechSDK.cod you have installed everything first and then install your
-
Pictures on SD card - two files - how to combine blackBerry Smartphones?
When I go to my Media tab, select my pictures, it shows me that I took with the blackberry. I have the BB set up to save the photos on the SD card etc, so I guess that's where they are. However, I had photos on the SD card in my previous camera. I
-
Maximum memory of blackBerry Smartphones 8350
No one knows what the media memory maximum curve 8350 is capable of? I want to talk about the micro sd card that you can add to it. It came with a 1 GB card, which is almost nothing in the songs and video. I would install a 16 GB card, but what to
-
DBCA not showing ASM diskgroup
where as the ora.asm the resource is executed too and asmcmd & sql (like sysasm) sees him starts: DATA & FRA, but when you try to create a database using dbca... nothing is visible.FYI, there is a single database... not CARS.Please help/advise, what