How can I activate/emulate images .jpg in Hotmail slideshows?

I can't read slideshows for .jpg images that are attached to messages in Hotmail. Research on the web in general and this site in particular seems to offer no solution, even if some web research has shown the problem and the only solution offered seemed active Silverlight that is installed, and plug-ins list shows it enabled Firefox. Obviously not the answer.

Is there an add-on or plug-in that will make the slideshow works pretty much as it does if Hotmail is opened using IE?

I'm this component on a Vista system. The same condition exists if you use XP.

Thank you.

I am not sure what change made the difference. I don't not change/check after each add-on/plug-ins update. There were many, and it's kind of tedious, so I could see it take a full day in this way. But everything works fine on slide shows now.

I apologize for being so lazy and wish I could name the author of the offence, but it is clear that it is not Firefox itself.

I appreciate your responses and thank you for them. Given that the two responses shows the way, I'm not scoring one or the other as the solution but this will signal so people know that the solution lies in the thread.

Once again, thank you.

Tags: Firefox

Similar Questions

  • When I record video in portrait mode, it displays in the landscape. How can I activate the image?

    When I record video in portrait mode, it displays in the landscape. How can I activate the image?

    Go to [MENU]--> [reading]--> [rotation]. The image rotates when you press the Center button on the wheel.

    If my post answered your question, please mark it as "accept as a Solution.

  • How can I Center my images .jpg for photo paper?

    My new hp photosmart 7525 prints images, but the images are out of the Center, and a white border (between 0.5 and 2 cm wide) appears. Sometimes a singular boundary is along one side, sometimes along the perpendicular sides. Orientation seems to depend on which file is selected. These boundaries appear despite my selection of "print without margins" for paper glossy 4 x 6. HP technical support says that the problem is a problem of application (Windows Picture and Fax Viewer) and not a hardware one. I want a picture without any boundaries.

    Hello

    Ensure that the appropriate paper type and size has been selected in the printer properties

    Click on Start , settings and Printers .

    Right click on the HP Photosmart printer icon, then select Properties .
    Click Printing Preferences .
    Click on page layout .
    Click borderless printing .
    Among the options provided in the print borderless window, select the appropriate paper size and paper type.
    Click OK and then apply .
    Click OK to close the window
    If the main driver on the PC does not produce the desired boarderless prints, then I'll try using another driver, like the HP Deskjet 9800 or 6980 pilots, as a possible workaround.
  • How can I activate images on the DVD in video file so that I can edit and send to people?

    Hello.  I recently transferred footage tape VCR to a gathering on a DVD of family.  How can I activate images on the DVD in video file so that I can edit and send to people?

    Any help would be appreciated, as I was chasing my tail for about an hour and a half now.

    Thank you!

    When you insert the DVD in your DVD player... close
    all the windows that can open and then go to... Start /.
    Computer... right click the icon for the DVD player
    is in, and then select or open Explorer.

    The files you need from the DVD are the. VOB files.
    You will find them in the VIDEO_TS folder. Copy them
    in a folder on your hard drive. Or you can copy the
    full VIDEO_TS folder.

    First... just try to rename one of the. VOB files to
    . MPG or. AVI and see if it will matter in Movie Maker.
    If import works... drag the file to the timeline and
    Economy/publication it to .wmv or .avi format. Then...
    Re - import new video film for editing purposes.
    (if you have Vista Home Premium or Ultimate, you)
    may be able to import the VOB files in Movie Maker
    as they are)

    (FWIW... you can probably play the files renamed
    in Windows Media Player to be sure that VOB
    file to edit)

    If you are unable to import the files they need to be converted
    another .wmv format would be a good choice.

    There are many programs that can do conversions...
    The following freeware is an example...:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup260.zip<>
    (FWIW... installation..., you can uncheck
    ('all' boxes on the last screen)

    First, you will need to decompress the file or just open the
    Drag FFSetup260.exe out of the folder
    and drop it on your desktop. To install left click.

    Next, after the download and installation of Format
    Factory... you can open the program and
    left click on the toolbar, the "Option" button and
    "Select an output folder to" / apply / OK.
    (this is where you find your files after they)
    are converted)

    Drag and drop your video clips on the main screen...

    Select "all to WMV" / OK...

    Click on... Beginning... in the toolbar...

    That should do it...

    Good luck...

  • How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program.  There must be a way inside the adobe progra

    How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program.  There must be a way inside the adobe program to turn off because I turned it on by clicking with the right button on an image in the editor of the first, and then when you are prompted, he said he would run in the background and I said okay, now I can't stop it! .  It appears in earlier versions of first items under Edit-> Preferences-> media analysis you could uncheck it to turn it off.  But there is only a media section and in this tab, there is no automatic Analyzer to be seen.  Thanks in advance for any advice

    Rebeccah

    What computer operating system? You are in the first elements 13/13.1 editor preferences or in organizing elements 13/13.1 preferences?

    Where are you looking for in organizing elements 13/13.1 that you do not see Edit Menu/preferences /-media analysis that you do not see the options of AutoAnalzyer.

    Organizing elements 13/13.1 preferences...

    Please point out where you find a command to run AutoAnalzyer in the background in 13/13.1. If I right click a file, I see AutoAnalzyer perform what seems to be a time run command automatic Analyzer of a file.

    Please specify.

    Thank you.

    RTA

  • How can I activate my picture in a negitive?

    How can I activate my picture in a negitive?

    Image > adjustments > invert

  • Pls how can I activate my iphone4 who is disabled

    Pls how can I activate my iphone4 with disabilities.

    Help here > If you forgot the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

  • How can I activate sim free new iphone is?

    Buy my first is iphone I just took delivery, but given that I bought unlocked and sim free, it will not be activated. Apple support said that I need a sim card. Like I did, maybe I should have, but I'm here.

    So if I want to use my iphone as an ipod and a camera and for the most part, how can I activate this self iphone so I can use it on my home wireless network?

    I tried iTunes to activate and therefore not supported, but they gave up and said to a sim card.

    What are my cheaper options?

    I so wish apple included a simple line on the ad that says if you buy this se iphone to use as an ipod and buy you it unlocked, you will not be able to activate it.

    Hugh

    Cannot activate iPhone without SIM card period.

    If you can not activate your iPhone - Apple Support

  • How can I activate the history?

    Mozilla has recently upgraded and Firefox does not display the history or downloads, how can I activate them?

    To put on the story go to these settings:

    1. Click on the menu Burger
    2. Click on Preferences or go to about: preferences
    3. Click Privacy and then on history to remember history
  • How can I activate the pop-up Blocker

    How can I activate the blocker pop up on Firefox?

    drummershob said

    addons.Mozilla.org > Add-ons for Firefox > Extensions

    The Firefox Extensions section of AMO are for Office Max OSX, Firefox for Windows and Linux. Firefox Android extensions are to allplayer

    There is no section for the OS "Firefox".

  • What happens if I can't find the owner of the iphone. I'm Phil and my aunt just gave this iphone 4S of canada she had chosen their street. How can I activate it? Should I me this makes rather in the apple store here in the phil? Pls help

    How can I activate this phone? What could be the best solution to my problem. This iphone 4S is still in good condition.

    If you find a lost device, I would advise that you contact the carrier. If there is a SIM card in the iPhone, the carrier's name is probably written on it.

    So also we recommend you to contact law enforcement. If the iPhone has been reported as lost, and the person who has lost the serial number, the police will be able to restore their iPhone.

    If you still can't find the original owner, you know that the iPhone can be locked in three different ways:

    -Locking: it is a security feature to protect the data stored on the iPhone. You'll need to clear its content: https://support.apple.com/en-us/HT204306

    -Lock activation: this is a security feature to prevent thieves turn on stolen devices. Unfortunately, it also goes for lost devices. You can find out if it is blocked here: https://www.icloud.com/activationlock/ if this is the case, former owner of the iPhone is the only one who can unlock the iPhone, sorry. Unless they connect to their Apple ID and remove the iPhone from his account, you won't be able to use it. There is not much interest to let the phone from Apple, because they won't be able to use it either. Maybe the local police can keep him.

    -Lock carrier: a carrier locked the phone to their network. You can contact the carrier to ask them to unlock the iPhone. There may be a charge for this.

    Of course, the iPhone can be locked in three of these means. The only one you can not pass without the original owner's lock Activation.

  • With the new version of firefox I was supposed to have the new design, but is up to having the old man. How can I activate a new?

    With the new version of firefox I was supposed to have the new design, but is up to having the old man. How can I activate a new?

    Click next to the item of help on the top menu, and then deselect menu bar.

  • I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

    I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

    YYou want to save raw images, but not all? Is that what you mean? When you import into FVP you can select the songs you want and you can set the library in the Inspector to record the files on any player, anywhere.

  • How can I activate the flash and java on firefox23 as I have the latest version installed and yet the plugin page shows "off" with no option to activate

    I've updated to Firefox 23 and it disabled my Java and Flash plugins. I then updated for Flash 11.8.800.94 and Java Version 7 update 25. Now they are appearing on the plug in page but display "disabled" with no option to activate. How can I activate them view the content on the web.

    Hello Vikram - Kumar, try the following: enter Subject: config in the bar firefox address (confirm the message information where it appears) & get preference named plugin.blocklisted.flash & plugin.blocklisted.java - right click and reset the Scriptures to their default value.

  • How can I activate CV for safari in OS El Capitan?

    How can I activate CV for safari in OS El Capitan?

    Don't turn off Safari before you when stop you the mac, and When you stop, check the "reopen windows when you connect in '.

Maybe you are looking for