How can I configure my printer HP Deskjet f4400 to print wirelessly with my Mac osx?

Similar Questions

• How can I configure to print wirelessly on a Mac

  Hi guys,.

  I recently bought the HP Laser jet P1102w.  I took the printer on location work and used for the first time.  It was a process of soimple of the printer and automatically downloaded and installed MAC software.

  As we were out of the office, us were not connected to the wireless network and was therefore not able to configure the printer to the netwrok.

  Now that we're back in the office, I want to set up the printer so that it can be used without wire of all devices connected to the network.

  I can't find how to do on MAC OS X 10.6.8.  I removed the printer from the Print & Scan utility and tried to install it again when you are connected to the network, however I am still only able to print when connected by USB.

  I understand that I can print via the device connected to the network, but rather would set it up to do all together with wireless.

  Please can you point me in the direction to find the instructions for set up?

  Any help is most appreciated.

  Hi @EI2014 ,

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open in other browsers.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Claire on the former network settings on the printer.

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  Plug the USB cable from the printer to the Mac.

  Go to Apple, system preferences, print and fax.

  Double-click the P1102w.

  Open the utility.

  Click Printer Setup.

  Click config HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the print and fax.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello p1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Remove the USB driver, then add the network printer.

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.

• Printer HP psc 1210xi range can be configured to print wireless?

  Hello Forum - anyone know if the printer mentioned above can be configured to print wireless or is it more cost effective to simply buy a new printer?       Run Windows XP thanks for any help-

  Perhaps you could get a wireless router that supports USB printers, but it would only print of this configuration, not scan.

  I recommend you to get a new wireless printer.

• How can I configure the printer on my Officejet 6500 a display more to the date and time?

  I replaced my wireless HP OfficeJet All In One printer 6400 with a 6500 has more wireless and want the default screen to have the date and time, just like my previous one. How am I able to do? I've set the date and time through preferences, but I want to be there when I turn on the printer.

  Hi Irvonne!

  Displays the date and time on the home screen of the 6500 a Plus isn't a feature of the unit is supported, I'm afraid.

  Thank you

• OfficeJet Pro 8600. How can I configure default printer 2 faces to avoid the re-creation of each print job?

  You need to change the default value of the print side single 2-sided print OfficeJet Pro 8600 running on iMac OS X 10.6.8? I can print 2 sides but don't know how to do as a default value. Need help.

  Hello

  A preset is an option provided by the OS X print dialog allowing you thus save print settings used.

  1. Open the file that you want to print.
  2. In the menu file , cclick Print. The print dialog box appears.
  3. Change the print settings to perform a duplex print job.
  4. On top of the print just after the name of the printer dialogue box, you will find the menu presets.
  5. Open the presets menu, and then select Save settings as a preset.
  6. Assign any name to save the preset, and then click OK.

  Now the saved preset settings will by default be used until any other preset is selected.

  Hopefully it's clearer now,

  Shlomi

• HP 4500 envy: How can I configure e print on my hp 4500 desire

  I need help setting up my envy printer 4500 for use with my chromebook.  I asks me to enter the e-mail address of the printer, but I do not know how to set up eprint to receive an email from the printer.

  Hello and welcome to the HP support community.

  Your printer manual describes how to set up ePrint and how to find the email address of the printer.

  For Chromebooks, you configure Google Cloud Print, which is described in many discussions, which it.

  Good luck, hope this helps.

• How can I configure to print small on Yahoo email, so that everything fits screen?

  Yahoo mail worked fine, but suddenly print to the screen is too large, making it difficult to read the e-mails. In addition, the screen type of moves backwards (from left to right and back). I had no problems until the installation of Firefox 42. I received a message on "pixells", which I think I have neglected. How I would fix them and what size?

  Because on the screen, the best way to adjust the size is to use the zoom feature. In the application menu (accessed by using the menu '3-bar' key), it generally controls that look like this:

  - | 100% | +
  

  -Reduced the size of the text, the + increases the size of the text, and if the number Center otherwise 100%, clicking on it will reset the zoom to 100%.

  The corresponding keyboard shortcuts for Mac are:

  • Control + - to reduce
  • Control ++ to increase
  • Command + 0 (that's a zero) to reset

  Does make a difference?

  Firefox has a setting for what is called the device pixels, but if you have only a problem on one or more websites, then I wouldn't because it is a global setting.

• How can I configure the printer preferences and not just margins, etc.

  The default setting for my printer is A5 (8.5X5.5' and every time when you print a page (document) of Firefox, I have to set the printer to letter-size preferences and which tray to print.) Is there a way for me have Firefox do for me?

  Thanks, uncle Dewey

  From topic: config
  
  It's preference that tells Firefox saves the last modification of the settings.
  
  Print save_print_settings = True - (by default): save the print settings after each print job

  This setting has to be changed in about:config if you would want to switch it to False.
  

  And as jscher2000 said.
  
  Print.printer_name.print_paper_height
  
  Print.printer_name.print_paper_width
  
  -the values are stored as measures either inch or metric or not according to U.S. paper sizes (letter, legal, custom, etc.) or 'A' type of paper sizes.

  These two settings are saved in the selection of paper made in the dialogue window of the printer properties for the printer that can be opened from the Properties button in the "native print dialog" window of Firefox which is what you see when you start printing in Firefox via {Ctrl + P} or one of the menu items print.

  These two settings are automatically set or changed with each print job which is sent to the printer. There is no way to set a permanent default paper size, the default is the last used paper sizes. 
  
  Right, wrong, or indifferent, Firefox does not honor the system-wide default paper or printer settings you make for the printer in your operating system. In Firefox the "last used" is the "default".
  

• How can I configure two ethernet ports to connect to a VPN with Windows Server 2008?

  Something I can put in place, but im stuck with an error that I get is that I need two ethernet ports to configure vpn but why and how do I make it work I like

  original title: vpn windows Server2008

  In order to configure the VPN, you can take a look at:

  http://TechNet.Microsoft.com/en-us/library/cc725734 (WS.10) .aspx

• How can I get my printer wireless reconnected without having to restart my computer?

  I have a HP Photosmart Premium printer installed as a wireless device. Often, when I closed my laptop via the mode 'sleep', I apparently lose the connection to the printer. When I try to print a document, it does not print and the printer status shows "offline".

  What could happen:

  The printer is for wireless operation. During installation, an address on the network is requested by the DHCP service on the router. This address is entered in the connection information for the printer.

  After a certain period, the computer is suspended. Will switch "standby". Close the wireless connection. Later, the computer wakes. An address is requested and issued. However, it is not the same address as that was iddued and registered in the connection information. If and when printing is started, the printing device is in standby mode because it now cannot connect through the old or new address.

  This can be corrected temporarily be remove and reinstall the printer. However, it will fail the next time that the computer is paused.

  Giving the printer address fixed, solved the problem because no address must be requested or issued by the router. There will always be the same.

  ===============

  Maybe HP has released a fix for this problem. Check on their website for a new driver package. If offered a choice, download the full package. Install it, and then try again.

  If they do not, or you get no joy, please check the print material included with the printer and that available for it on the web site. There should be instruction detailing how to set up for wireless communication. In addition, it is usually a page of instructions available on the printer itself that behaves like a web page. Find the name of the printer in network Prfnters. Mouse click and look for the network settings. For mine, it appears as a tab.

  Take a look. Assess the situation. Let us know. Someone will help more.

  Tom Ferguson

• How can I configure that clicking on a link to a jpg with MIME Type JPEG Image simply causes the image displayed in FF?

  When I click on the link for http://www.vienna.at/resource.aspx/ResourceID/news-20080805-01032166-image (found in the http://forum.openstreetmap.org/viewtopic.php?id=1777), I get the dialog box "That FF should do with this file," where I can choose to open a new FF or save the file, but are unable to make the image displayed just like the other links to other images.
  I don't know where is the difference to regular image links.

  Look to open them in the browser: https://addons.mozilla.org/firefox/addon/8207

• How can I configure my imac to run a common virtual machine with 3 users?

  I am running Fusion 5.0 with OS 10.81 on my imac. Fusion works under windows 7 grand on my desk. When I go to start the virtual machine on the merger of office of my wife says that she doesn't have permission to open the virtual machine? I put an identical copy of the virtual machine in the shared file in the users folder so that all users on our imac family could see it, but it will not always be open.

  Help!

  Take a look at: sharing a VM between users on Mac OS (1005196)  

• How can I configure efax for my printer hp officejet 45oo wireless

  How can I configure efax for my printer hp officejet 4500 wireless

  Hello

  The Officejet 4500 with analog fax capability and does not support the eFax.

  Only models listed below support the feature of eFax:

  http://support.HP.com/us-en/document/c03102078

  Shlomi

• Please how can I configure / add my hp wireless printer to my window 7

  Please how can I configure / Add
  my printer wireless hp in my window 7

  Hello

  Millions and millions of printers are out there, what is your printer? You need the CD. Just put the CD in your Windows 7 computer, run the installer and follow the instructions on the screen.

  Kind regards.

• How can I configure reader adobe XI as one of my printer port? Help, please.

  How can I configure reader adobe XI as one of my printer port? Help, please.

  Adobe Acrobat (Windows only) comes with a virtual printer that allows you to create PDF files. The free player does not work.