How can I connect directly to a cable HP LaserJet 8150n using a Cat5 Ethernet? (It can be done)
I use my printer in this way for months, but accidentally deleted the device in the Panel of the unit. Now, I can no longer connect or print anything. Initially, it was created by a friend who assigned its own IP address printer. But I have no idea how or what command prompts I need to enter to make the connection. If someone is good to give directions to the 'how', I would be probably happy.
This isn't a solution, but I'll mark to close the debate. A consumer who just wants to use her HP printer, you can see how I might be confused about which thread where my question. As a printer Tech, you might well have just provided the answer rather than make me jump through hoops. As a HP representative, indicating the consumer, they are wrong and have asked the wrong question at the wrong place is not the best relations with the customer. If you do not know the answer because of the printer class, simply provide the necessary information with an apology for the confusion. Never heard of "the customer is always right" slogan?
Tags: HP Printers
Similar Questions
-
How can I change my internet connection from wireless to wired
Desktop HP Pavilion HPE h8-1017
Windows 7 Home Premium 64 bit OS
How can I change my internet connection from wireless to wired?
Hello
You already have a wired connection to your home? Very simple, just using a CAT5e or CAT6 cable and connect to a LAN port of the modem or router to port #2 (at the back) until you and your machine will:
Kind regards.
-
How to configure a direct cable connection between two computers in Windows 7
Hello
I'm trying to set up a connection by serial cable with serial cable RS232 DB9 female-female between 2 PCs, one with Windows 7 and Windows 8.For the initial check of the cable, I used a terminal program such as HyperTerminal, PuTTY, RealTerm. But none of the PC was able to read/write data from the port. I shorted her transmit and receive pins (2 & 3) at one end with a jumper (PIN stapler) for a loop to return the data to the Terminal. Terminal exits each letter typed twice, that is to say the cable and the COM port works correctly for two computers. But with 2 PCs connected, the Hyperterminal does not output nothing written of another PC Hyperterminal.Possible suspects: -.1. in the device-> PORTS (COM and LPT) Manager - there are 3 elements in both PCCommunication Port (COM1), Communications Port (COM2), the Printer Port (LPT1).while I plug / unplug the cable at the PC, nothing changes in this section.2. the drivers for this type of cable to not installed.3. different OS installed on the PC.4 or I have to create a new connection , and then connect directly to another computer as mentioned in http://support.microsoft.com/kb/305621/en-us . But I didn't know how to do these steps in Windows 7/8.Any idea about this problem is appreciated.The problem is your trying to use both ports 'exit' to connect two computers / never going to work.
VGA ports are for v's t. 'If' they are able to c.p.. otherwise, you will need to use a HDMI to the TV which is also an exit from the c.p.
If you notice your computer and your monitor using a DVI port connection not a VGA.
And no you can not use a DVI cable either :)
-
When I connect my Ipad or Iphone to my computer via a USB cable, I can open the storage folder without using a password. How can I avoid someone else do the same?
This storage folder are you referring? If you are referring to the film, what happens because you have accepted a trust between the iOS device and the computer. If the device has been connected to another computer, it must be unlocked and establish a relationship of trust as well. If you are referring to something different, please explain.
-
How can I use my Apple TV directly on MY iMac laptop Pro? I want to say on my iMac directly WITHOUT connecting to TV
There is no such thing as an 'iMac Pro laptop. And you can not directly connect an ATV to something other than a HDMI entry screen.
-
How can I connect my printer to work on a cable
I use vista on my laptop at home a WiFi printer. How can I connect my printer to work on a cable. When the printer does not recognize the printer cable an impression has been sent. All the drivers are up to date.
Check here
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
-
I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?
Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)
-
Network wireless adapter NIC Ethernet network device
I've updated from Windows XP to Windows 7 recently. My internet connection used to be connected directly to my computer and I have a wireless router for other users in the House. Since getting 7, my computer (while still having the direct connection) should automatically connect via the wireless. If I disable the feature wireless to the computer I lose access to the internet completely. Is there anyway that I can get it back to the way it was without going back to XP? I know it's probably something really simple to fix, but I just can't understand it. Thanks for any help you can give!Hello
I recommend you to follow the steps suggested in this article and check if it helps.
I can't connect to the Internet via wired broadband digital subscriber line (LAN) or cable.
-
Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?
Hello
The fastest internet connection depends on your internet speed provided by her Internet (ISP) Service provider. Therefore, contact them to receive a best speed of the internet.
For more information:
How to increase the speed of navigation: 7 ways to work faster on slow connections
http://www.Microsoft.com/atwork/remotely/connections.aspx#fBid=TN-_TCHYDMB
10 tips to help improve your wireless network
http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=1vrPRuhAhAg
Internet Explorer is slow? 5 things to try
It will be useful.
-
I have a laptop Windows 8 . I want to connect to a new round of windows 7 and transfer the data at least 8 MB/s.
Please send me the procedure to follow. I don't want to share Internet, but want to transfer data.You can do this, but you need a special type of Ethernet cable called a crossover cable. This means the son in the swap position cables so that "send" and "receive" the computer two plugs can communicate.
Learn more here: http://windows.microsoft.com/en-us/windows/connect-two-computers-crossover-cable#1TC=windows-7
-
How can I connect Windows Fax and Scan? I have a cable modem
I have Windows 7 and I'm using Cablevision as my ISP. Installed a Motorola Surfboard Cable Modem SBV5120. I want to use the program Windows Fax and scan to send a fax, but Setup search a modem and can't find what I have Cablevision. How can I use the Windows Fax?
Fax requires the use of a standard phone line, no cable.
-
Recently had computer problems, now when I turn on my computer I had to go through Microsoft sign on the page before I can access my Start Page. How can I remove this and have my Start Page to come once the computer has developed?
This should solve your problem:
"How to turn on automatic logon in Windows XP"
<>http://support.Microsoft.com/kb/315231 >HTH,
JW -
How can I associate my CSS styles properly in my HTML file? (It is a single page with a spry menu drop down, which somehow does not appear when I hover over the buttons). I use a file copied from the original because it was initially saved on my computer at school so I had to rebuild everything.
When I click to see the CSS styles, he said: "sprymenubar.js' put not on the local disk.
When I click on 'get', it is said that the spry isn't in a defined site. It says this for all my CSS styles.
Never mind. :) I was looking through another copy of the file, I did and it works fine there.
Sorry for taking your time and thank you,.
MG
-
Hello
How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable
You can network or target mode a mac computer
OS X Lion mountain: connect to shared computers and servers for files on a network
Share files between two computers with target - Apple Support disk mode
However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.
-
How can I connect my hp b314 20 PC to a TV?
How can I connect my HP b314 20 computer to TV HDMI if the computer does not have the HDMI port?
HDMI converter USB-adapters are now widespread. You can find in any store that sells computer supplies. You can even set up more than an additional monitor or a TV with some models.
The United States, try to Wal-Mart, Best buy, Radio Shack. You can order online from Newegg.com, Amazon, etc.
It will come with a disk containing the software to install the first. Follow its instructions, then you are running.
Sewell Direct is one of these online companies that specializes in the adapter cables and has a video (scroll down for video) on how the process works.
It will be useful.
Maybe you are looking for
-
I use this formula to fetch a price using two worksheets in the same window. INDEX (the G list price), MATCH Live SKU, CAT SKU, Find valeur0), col-index, index of surface Now, I want to have look at a total of 7 worksheets. Is there an easier way to
-
NB100: Using BT/WiFi / 3G separately
On NB100 to use 3G, I need to activate the WiFi/BT on the go, where I need 3G only, which allows WiFi/BT drain battery unnecessarily. Often, I need only to BT (for mouse) and don't need to use WiFi or 3G. I heard that NB200 can use BT/WiFi / 3G separ
-
Can I use my printer manually instead of using the wireless connection?
Can I use my printer manually instead of using the wireless connection?
-
Explanation of the brightness in Photoshop
This question has been asked before, but he had no answer. The previous discussion is here:what is the definition of brightness in Photoshop?The term 'brightness' is often used in Photoshop for example brightness mix masks of mode and brightness.How
-
How to view reports title several changes at once.
Hi allThere are approximately 200 reports in a folder with a specific image in the display of the title.I want to change to another picture.One is a manual way in which I'll have to open each report and change the display of the title and make change