Similar Questions

• How can I detect if a step has been ignored?

  In an application of C-Sharp, is there a way to detect if a step has been ignored once completed execution?

  ApplicationMgr.GetRunState () and ApplicationMgr.GetTerminationState () do not say if the execution was complete (Nothing ignored) or incomplete (1 or several steps skipped).

  I have to walk through the steps and use the Step.GetRunModeEx () method?

  Hi tlaford,

  You will still need to check each step, but I believe that what you try to do better with the use of Step.ResultStatus:

  ResultStatus property

  Syntax

  Step. ResultStatus

  Data type

  String

  Goal

  Specifies the status string for the step.

  Remarks

  Although you can set custom status strings, this property is usually set to one of the Proprietesde constants.

• How can I publish that the problem has been resolved?

  How can I select RESOLVED?

  You can post in a thread that wrote you that you consider the post a person brought the solution.

  In a thread only the initial post didn't accept it as a Solution in the bottom of the post.

  Click the accept as solution in the post that you consider to be the solution.

• How can I prove that a part has received an e-mail even if they have not touched the link?

  How can I prove that a part has received an e-mail even if they don't hit the link button?

  Go to the party and check their e-mail inbox.

• How can ensure me that my chart has several plots?

  I'm trying to get a chart that plots from a txt file I have. The first coumn came and the rest of the columns are data from the various sensors. On the chart that I got it looks like its reading at the first cloumn.

  

  How can I ensure that I receive a plot of each column?

  Thank you

  Altenbach says:

  (I think that your table manipulations may be further simplified)

  Yes, read the converted file and use "delete from table" as follows:

  

  Much simpler!

• Remote procedure call (RPC) - how can I determine if a person has been access to my system remotely? I think someone is.

  I think that my computer is accessed remotely, files and emails being read. I disabled remote access in the Services section and have also disabled Mobile Sync; I did not use one of these services.

  When I took the remote procedure call (RPC) service and open the properties, the logon tab has the section "This account" clicked, "Network Services" typed in the box and a password. I can't change anything on this tab properties. I can't disable the service or disable the 'unattached profile '. How access to this service to make changes and more importantly, how can I confirm that someone logging into my system to remote and checking e-mails, files, etc.. This isn't a networked system, it's my computer in my home office. I am running Vista Ultimate.

  Thanks in advance for your help anticiapted.

  Hello

  Ultimate also has group policies that you can set to lock the machine - GPedit.

  Management of Windows Vista Group Policy (part 1) - see links to part 2 and 3
  http://www.windowsecurity.com/articles/managing-Windows-Vista-Group-Policy-part1.html

  Don't forget someone might access your email on the server, so do not forget to set a new password.
  As someone else has physical access to the computer?

  System Services stop isn't really the best/correct method to ensure safety.

  1. make sure that the system is free malware:

  Do a thorough check of the malware as no program detects and removes everything. Easy to find addition
  Malware is often accompanied by more difficult to discover and remove the payloads. Better to be cautious
  now that suffer the consequences later.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  =======================================
  =======================================

  2 configure security - get a router with a built-in hardware firewall to add to your safety.

  Check with your router manufacturer and their forums because they usually have great information.

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I prove that an iMessage has not sent me?

  human resources has reported a person in my company of sisters that my sister sent her threatening iMessages with screenshots as '' proof. '' My sister has never contacted the party claimed. After some of our own investigations have taught us that you can change the name of a contact in your phone for making telephone number, it seems that the number has messaged you; When in reality it could be any number that the contact name has changed to display a number rather than a stored name.  So that we know how she sent herself threatening iMessages showing my number of sisters, but now, how can we prove these messages do not come from my sisters camera, Apple ID or number?

  Your sister should immediately contact a lawyer.

• How to check remotely that a computer has been restarted after Labview LIFE 2011 has been installed on it?

  Hello

  I'm deploying an application Labview 2011 on 150 XP machines in various plants worldwide. Currently, all the machines still have an old 8.21 Labview runtime (+ old DAQmx). I sent a procedure to my colleagues in the plants so that they fit the new runtime environment (+ new DAQmx). For my part, I built a code to check my PC if a certain registry key is present on the PC 150 who told me that the new run installer or not.

  The key I found is:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\Installer\Products\1C5E801AE54C4AE43A59FC169F95CA28]
  "ProductName"="NOR-DAQmx Configuration 9.3.5 Support MAX"
  "PackageCode"="61EEAEC207A28A842B3341ED6809453D."
  'Language' = dword:00000009
  "Version" = dword:0923 c 001
  "Transfer" = DWORD: 00000001
  "AdvertiseFlags" = dword:00000184
  "InstanceType" = DWORD: 00000000
  "AuthorizedLUAApp" = DWORD: 00000000
  "Clients" = hex (7): 3A, 00, 00, 00, 00, 00

  It works well but it does not say that the PC has restarted after the Setup has been run. If I do not have to restart the PC and try to run my Labview 2011 executable I get a long error message (NIDAQmx not registered,...).

  As it seems difficult to get the properties of a key to know when it was installed I was leaning rather to check whether or not a certain DLL (?) was recorded. But it's just a vague idea, and I don't know how to set it up.

  I enclose the code that I have and that works well, but cannot differentiate between Labview 2011 installed runtime and PC restarted or not.

  Thanks for the help

  Christophe

  You could look for a file that would be created as part of the installation to determine date/time Setup (ini or another file created as part of the runtime support installed)

  Combine that with a request of availability of the station and you can calculate if the station was longer than the time since the installation. Not perfect, but should be possible...

  http://en.Wikipedia.org/wiki/uptime#Using_WMI

  wmic /node:"my-server" os get lastbootuptime
  

• How will I know that my system has been compromised by typing "Netstat" in the menu run?

  I ran a few patches to enable or download the full version of the software. I read that crackers/Hackers instill Trojan horses to any system by doing this. When I type "Netstat" in the run menu and click on "Enter". Netstat.exe presents a set of IP addresses from a local or foreign address. So connections are made! Should I be afraid? Is it a matter of worry? (Trying to figure out I look at the image as an attachment).

  

  If it is, then what to do? Note, I have my Windows Firewall on! Expert advice is preferable. Just get the load off of me, please! Oh, my system is not stuck. She seems to be ok. In addition, how can I know my system is compromised or something? I use Windows Media Center Pro v x 64 bit 8. Antivirus: Windows Defender [not updated].

  If the firewall cannot stop H/Crackers, what are the use of that? I use Home Network, I share all of the files or folders. What do you mean, Dr. Watson? If my system is very vulnerable to Hackers/Crackers, should what steps I follow?

  Please, be specific. Have you looked at the attached picture? What did he say? Is it a matter of worry? When I connected to the internet, these connections were established immediately or via the [unknown] servers. Please talk Netstat.exe and image I have uploaded.

  You can follow as easily as everyone down the owners of a given IP address.  This isn't a problem with Microsoft if you infected or infested with your machine.  ;-)
   
  Start plugging the IP addresses at the end of this in a browser...
   
  http://www.IP-adress.com/whois/219.93.34.40
  http://www.IP-adress.com/whois/168.63.209.229
   
  ...
   
  Etc and so on...
    
  A quick look at the screenshot shows some "Microsoft" IPs "Malaysia" a few related and IPs.  If you are * in * Malaysia and/or actively visit a web site here - this could be very good.  * smile *.

• How can I reinstall PhotoShopCS3 and HD has been cleaned?

  How can I reinstall PhotoShopCS3 after that HD has been cleaned?

  Thank you

  Hi Larryc23776909,

  You can download it from here https://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  Find your key series here:https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if it works!

• How to make sure that Adobe Reader has been properly patched?

  Before patching

  Adobe Reader version 9.3.0 installed via GPO worked without problem for months on Windows XP Pro SP3

  Connection method

  I copied the following files to the local C:\V932 folder:

  AdbeRdr930_en_US.msi (installation of MSI v9.3 original file)

  AdbeRdrUpd932_all_incr.msp (the downloaded file patch released in April 2010)

  Then I used the following command:

  msiexec /a AdbeRdr930_en_US.msi /p AdbeRdrUpd932_all_incr.msp

  The result

  -AdbeRdr930_en_US.msi file is updated to the date and time that the above command completed
  -4 new folders created (commune, CommonAppData, Program Files and Windows)

  Then, I created a new folder (\\servername\AdbeRdr932) on the server and copy all the contents of C:\V932 to this shared folder. After that, I created a new GPO package to upgrade the version 9.3.0

  Rebooted my Windows XP Pro machine and the upgrade went successfully. When I check help - about, it shows that I have 9.3.2

  Here's the problem:

  When I compare Adobe Connect files in the following folders, some files do not match:

  C:\Program 9.0\Reader of Adobe

  and

  \\servername\AdbeRdr932\Program Files\Adobe\Reader 9.0\Reader

  For example:

  Properties of AcroRd32.exe in the C drive shows the version of the file 9.3. 0.148

  Properties of AcroRd32.exe in the shared folder shows the version of the file 9.3. 2.163

  There are other files (DLL, EXE) that do not match. The files in drive C: is earlier than those on the shared network folder. Now I don't know what to trust, the version information illustrated with Adobe Reader - About or file version information.

  For those who deploy Adobe Reader version 9.3.2 via GPO, you see the same problem?

  As you say-

  When I check help - about, it shows that I have 9.3.2

  and

  Properties of AcroRd32.exe in lecteurC poster file version 9.3. 0.148

  These two statements tell the whole story.

  Try one thing - Go to help--> on... I know that you have done this, and on this screen, it shows 9.3.2... thats fine

  Now take the mouse to the position on the start screen where 9.3.2 is written and click

  After clicking, you will see a different version string. I bet that now you will see 9.3.0.148.

  This is what is happening behind the scenes:

  First version 9.3.2 is levied on a registry entry

  But when you click on the start screen, that version is levied on the AcroRd32.dll

  Unfortunately there is no right way to distinguish if the drive has been properly patched or not because sometimes version to the splashscreen is supposed to change after click on (if changes will only in the files other than AcroRd32.dll)

  In your case, the installation of the Reader 9.3.2 is corrupt because the way in which you create an agreement in principle is wrong.

  Follow these steps to create an AIP and deploy via GPO:

  Perform an administrative installation

  1 copy the installer msi Reader 9.3 to your machine.

  2. create a distribution point (a folder where the installer can install the non compressed

  program files).

  3. Click Start, click Run, and then type the following command:

  msiexec /a

  4. When you receive a prompt asking you where to install the files, look for the distribution point

  you created in step 2.

  5. click on OK. When the installer has finished, all files will be on the distribution point.

  Also AdbeRdr930_en_US.msi is also present on the distribution point. (This msi is used in step 7 below)

  To add patches to the administrative installation:

  6 copy the fix msp Reader 9.3.2 on your machine.

  7. click on start, then click Run and type CMD.

  At the command prompt, type the following:

  msiexec /a /p

  Once the installation is successful, you can copy this folder (distribution point) to any server and create the package of GPO.

  It is a two-step process.

  You have tried to do in one step! and that's where you were going wrong.

• How can I tell if my Mac has been hacked v10.10.5

  In 'Window leave Force', there is a flashing line in and out very quickly it was something like: applekit txt... {code

  I have a Mac Book Pro (2013) v10.10.5 with all the updates that are loaded.  My laptop was running a bit slow... freezing for short periods of time when you save a document or work in Photoshop. I moved a large number of my large video files to a backup disk to ensure that I have a lot of space. After the restart, I had that Chrome and Photoshop and Finder running. In the FINDER, I clicked on FILE / NEW WINDOW FINDER and saw the Rainbow Apple "Spinning wheel" for more than 30 seconds while you wait for a new Finder window open.

  More and more impatient, I clicked on the icon Apple and "force quit." In the window to leave, I saw three running applications but also saw a line of red text jump in, then disappear very quickly a few times. I tried to take a screenshot, but couldn't.  The only thing I could catch was something like applekit .txt... {code and that's all I could catch.} I disconnected from the internet, and he stopped.

  You have reason to believe that your mac is hacked?

  Have you recently installed any software suspect?

  Do you have a person with access to your mac that can install something without your knowledge (which requires an administrative password and the access to the system)

  Apart from that you run any type of Mac anti-virus. If so most, if not all have been cited on these forums as points of failure on the Mac and in many, if not all cases of withdrawal of restores them the response and the functionality of the system. Well-known companies AV display the instructions to remove their products. At this time there is no known Mac viruses in the wild, which means no laboratory of titles in the world posted of any finding of a Mac virus that did appear on the internet at this time, please do not confuse this statement with the absurdity of "Mac cannot get viruses.", what I mean , it's "they don't seem still one and mac AV is not nearly as flexible as it is counterpart windows and has been known to cause serious problems and not offer a lot of protection.

  Secondly you are running any 3rd party utility system or network, once again, these products are known to cause problems and are not only necessary are often contrary to the OS X, remove them from your system.

  If you are not sure what you are using please post a report of etrecheck for the volunteers here to look further as to what your system is running, this report contains personal or confidential information. the software was developed by a long time member of this forum in the first goal to help mac users to isolate a problem in their system and has been very successful in doing this, an overwhelming majority of positions where he asked attests to that.

  https://etrecheck.com/

• May have been wrong to accept the false update yesterday 08/20/11 How can I determine if false update has been installed?

  I was working today on our old XP, Firefox update failed because it was a trick. Yesterday a Firefox updated was approved on our laptop (Vista). How know if we ourselves have infected? Thank you.

  Do not worry. The message "something tried to trick Firefox" is just poorly written. This simply means that Firefox did not verify the certificate of the update and as a result has not installed. Other discussions on this message seem to suggest that this happens quite often and is not, in fact, an indication of "something try to trick Firefox", but a failure of Firefox itself.

  If the update has been installed on the second time, so this time that he managed to check the certificate, as well as the update is ok.

• I accidentally deleted my recycle bin how can I empty it now, it has been deleted for quite some time

  How can I empty it now?

  You can take:

  1. right click on an empty area of the desktop
  2. Select Customize from the context menu that appears
  3. in the column of the tasks in the left pane, select "Change Desktop Icons"
  4. under the desktop icons, click the checkbox in front of the basket to check.
  5. click on apply and OK

• How can I access my hotmail account has been blocked

  My hotmail account has been blocked due to anti-spam. I need to access my Hotmail Acount as all my stuff and personal mail is received. Also I didn't have a back-up of all my business and personal contacts.

  Thank you

  Hello

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com