How can I draw a curved line?

Similar Questions

• How can I draw a smooth line?

  I would like to draw a few smooth curves on one of my photos.  I tried the regular brush tool, but my mouse skills are not good enough to get some nice smooth lines.  Is it possible that I can draw smooth lines short buy Illustrator?

  The workaround in the elements is:

  1. Open an empty layer above the background
  2. Access the Brush tool and draw a straight line in the vertical axis. To do this, click a starting point for the line to the left, hold down the SHIFT key and click the desired end. You should see a straight line.
  3. Go to filter > distort > shear and on the grid of the dialog set the curve
  4. Press CTRL + T to bring up the transform tool, turn the curved line and refine following suit.

• How can I draw a straight line with a brush?

  I know that the pencil tool can draw a straight line with anchor points. Is there a setting for the pencil tool which can mimic a brush of 30 points, low hardness (from left to right) at an angle of 80 degrees, or is it possible to make a straight line with the Brush tool using a mouse?

  I know that this picture is a little blurry. what I want to do is to replace the 2 lines of white angles with point 30 brush effect 230 pixels wide. the project on the left side of the photo is a canvas 4 ' 2 ft. any ideas? Help, please.

  Straight lines are simple: the brush, click where you want the starting line (you will paint one place) then hold down the SHIFT key and click where you want the line to end. Photoshop will draw a straight line between your departure and arrival.

  In addition, for even more control, you can use the pen tool to create a path, then just STROKE the path with the brush.

  Mike

• How can I draw in straight lines in CS3?

  I would use pencil so I can freely draw straight lines to make any kind of shape, just like the screen below. As we shift on Photoshop and using the pencil holding. Is there another way to do it?

  This was made using a rectangle and anchor point, but it's a pain to do!

  

  Thank you

  I think you want the pen tool. If you click on a point, then another while to now shift, it will draw straight lines to 90 or 45 degrees. You should be able to do what you want in this way by clicking on each corner quickly, while now shift.

  To close your box, click again on the first anchor point. (He likely to change to a circle to indicate that you are going to close the path).

• How can I draw a line around the edge of a piece of property that I shot a video clip of 13 elements?

  How can I draw a line around the edge of a piece of real estate in a video clip with 13 elements?

  KING OF THE SKY

  First 13 items on what operating system? Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project?

  Your question immediately... you could try something like this

  In this scenario, you start with your video on video 1 track with the Timeline indicator placed in the appropriate location of content timeline.

  The Titler line file created will be automatically placed at the position of the indicator in the timeline.

  Text Menu/New/default of titration / and select the Section forms.

  The Titler file goes to Video Track 2 above the video on the video 1 track.

  Select the line tool in the section shapes and draw your line on screen correspond to the where you want it to appear in the video below.

  Your image of the line is the line on transparent background where the content below shows through the transparent areas in this image of the line.

  Please consider. If any questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• Displaying several curves on a graphical 2d in reports how can I force a curve to be at the forefront?

  Displaying several curves on a graphical 2d in reports how can I force a curve to be at the forefront? I have two signals, and I want to show a bunk on top of the other. This time Diadem will be only graphic it the other way around. I tried to delete the curves and add them in different orders, change the order that they are in the list of the curve, changing their order in the data, right-click on the curve portal and selecting "move to forground" (this only moves the complete 2D graphic object in the foreground). IM using the Diadem 12.0 base.

  Hello Joe,

  I found what causes your curves draw in the wrong "order".

  You are using two value axes and DIAdem still attracts before Y2 Y1 data, regardless of the order of the curves in the "Curve and definition of the axis" dialog box.

  I enclose your layout with a little modification, I changed the order Y1 and Y2 axis (I swapped whose data is displayed on the value axis) and I get the following result:

  

  Once I looked at your page layout, it appeared, why the order of curves does not reflect the order in which curves were drawn. I didn't - so I just learn something new here as well.

  I hope that this answer to your question, do not hesitate to ask if there is anything else I can help you.

  Otmar

• How can I draw the intensity in real time of a picture in time real (imaq 1394)?

  I have a firewire camera.

  I hooked up my camera to my pc with labview and now I display image in real time. How can I draw the intensity of a region dependent on time?
  Y - intensity
  X - time... I would watch the variaions real-time intensity...

  Thanks in advance

  The light meter example is pretty much what you want to do. It is located here:

  \National Instruments\\examples\Vision\2. Functions\Light Meter\Light meter Example.llb\Light meter Example.vi

  In the example, the x axis are the number of iteration, but it is easy to modify to use a graphic instead of a graph and chart the time instead.

  Hope that helps.

  Christophe

• How can I enlarge the guide lines?

  How can I enlarge the guide lines?

  Al

  simple answer is you can't. You can try to change the black color may seem more dense than cyan, but the difference will be negligible

  

• How can I remove a racing line in a text box

  How can I remove a racing line in a text box.  I use a Windows PC.

  Fantastic that worked.  Thank you very much

  Concerning

  Miriam

• I'm drawing a curved line with the pen tool, but he fills in a solid form.  I want only the line - what I have to change?

  I'm drawing a curved line with the pen tool, but he fills in a solid form.  I want only the line - what I have to change?

  pmreagans,

  Set the fill to zero at the bottom of the Toolbox.

• How can I add a separator line on Dreamweaver?

  Hello

  How can I add a separator line on Dreamweaver?

  Thank you

  Do you mean a horizontal rule (the

• How to draw parallel curved lines in Illustrator?

  

  I am completely new to Illustrator. I looked at a few tutorials about it.

  I want to create a bunch of parallel curved line in illustrator as circled above, however, it is quite confusing because how do.

  Can someone guide me step by step?

  In fact the part circle of your example is just a unique, path path, so we really don't know what you want in terms of "parallel curve."

  In any case, a specific way to get parallel lines of any kind is using delay of path.

  Also use the pen to draw a path:

  

  With she is selected, choose object > path > offset path.

  Enter a positive value. Note that when you use the offset path on a path (as opposed to a closed shape), the offset goes 2 ways.

  

  Use the direct selection (white arrow) to select the unwanted bits and remove them:

  

  Leaving just the original path and its new parallel path:

  

• I can't draw a slanting line?

  Whenever I try to draw a line at 109 degrees, then a horizontal line fixed the end of it, at 0 degrees, the line begins below the end point. How can I stop it so I can attach it my lines?

  Sean,

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• How can I add a continuous line of numbering in documents using Pages?

  I need to put the line numbers for each line in a document that I am preparing for the presentation of a newspaper. How can I make continuous line, numbering of Pages automatically?

  Pages can't do because it is not a TextEditor with a fixed number of characters per line, and there linewrap.

  Use a TextEditor like iText Express or iText Pro or similar.

  Peter

• How can I remove the black lines that prints when I use my ADF?

  When I use my ADF my copies have 2 black lines going down the middle.  How can I remove them?

  OK, the 8600 Officejet Pro has two pieces of glass used for copying, the glass of the main copy, and a thin (~ 1 "wide) section of glass on the left side.  If there are black lines vertical on copies or analyses both flat glass and ADF, and then the question would be caused by a defect in the sensor scanning.  The most likely hypothesis is that copies of the scanner glass flat are OK but there is a vertical line on the pages sent through the ADF.  This is caused by a small spot, perhaps as small dust on the cutting Strip.  Holding a strong flashlight on the front of the unit to the position just above the t in the logo HP Officejet Pro on the front will highlight the region.