I can't draw a slanting line?

Similar Questions

• How can I draw a straight line with a brush?

  I know that the pencil tool can draw a straight line with anchor points. Is there a setting for the pencil tool which can mimic a brush of 30 points, low hardness (from left to right) at an angle of 80 degrees, or is it possible to make a straight line with the Brush tool using a mouse?

  I know that this picture is a little blurry. what I want to do is to replace the 2 lines of white angles with point 30 brush effect 230 pixels wide. the project on the left side of the photo is a canvas 4 ' 2 ft. any ideas? Help, please.

  Straight lines are simple: the brush, click where you want the starting line (you will paint one place) then hold down the SHIFT key and click where you want the line to end. Photoshop will draw a straight line between your departure and arrival.

  In addition, for even more control, you can use the pen tool to create a path, then just STROKE the path with the brush.

  Mike

• How can I draw a smooth line?

  I would like to draw a few smooth curves on one of my photos.  I tried the regular brush tool, but my mouse skills are not good enough to get some nice smooth lines.  Is it possible that I can draw smooth lines short buy Illustrator?

  The workaround in the elements is:

  1. Open an empty layer above the background
  2. Access the Brush tool and draw a straight line in the vertical axis. To do this, click a starting point for the line to the left, hold down the SHIFT key and click the desired end. You should see a straight line.
  3. Go to filter > distort > shear and on the grid of the dialog set the curve
  4. Press CTRL + T to bring up the transform tool, turn the curved line and refine following suit.

• How can I draw a curved line?

  Sorry for the inconvenience, but I tried the Photoshop information and could not succeed.

  What should I do to draw a curve?  I have no problem, draw a straight line, it's pretty easy, but I was not able to find a way draw curves and get the same results to draw a straight line.  I tried to work with the Pen tool and I could draw some curved paths, but as I said that a path is something abstract, I can't work with it as a stright line.  I m pretty sure that the answer is simple, but I was not able to understand.  Can someone help me please?

  Howdy.

  But, how can I caress a path?

  To create your path, click on the button "Create a new path", second from right at the bottom of the garbage can. Select the pen tool. Draw your way. Click on the small triangle at the top right (highlighted). Select the path of the path.

  

  Select an option for how you want to stroke the path. I chose the brush. Brush properties are applied to the way such as a stroke.

  

  That's all. It will be useful.

  Peace,

  Lee

  PS: Semaphoric: did not know the shortcut. Thanks for the tip.

• How can I draw in straight lines in CS3?

  I would use pencil so I can freely draw straight lines to make any kind of shape, just like the screen below. As we shift on Photoshop and using the pencil holding. Is there another way to do it?

  This was made using a rectangle and anchor point, but it's a pain to do!

  

  Thank you

  I think you want the pen tool. If you click on a point, then another while to now shift, it will draw straight lines to 90 or 45 degrees. You should be able to do what you want in this way by clicking on each corner quickly, while now shift.

  To close your box, click again on the first anchor point. (He likely to change to a circle to indicate that you are going to close the path).

• Why 15.1.0 Illustrator can't draw a straight line?

  I wonder if anyone noticed that Illustrator 15.1.0 cannot draw a straight line with Lion as an operating system... What gives Adobe?

  Is not a fundemental of the straight?

  It appears all the grpahic elenments - polygons, lines, etc. all go out at a slight angle when the SHIFT key is pressed to force the tool.

  Everyone knows about this dilemma?

  Any help would be greatly appreciated.

  Thanks Monika!

  Now I feel like a fool for not checking this little box... (blushing).

  I really appreciate your accurate and timely response.
  Thank you once again,

  Ian

• How can I draw a line around the edge of a piece of property that I shot a video clip of 13 elements?

  How can I draw a line around the edge of a piece of real estate in a video clip with 13 elements?

  KING OF THE SKY

  First 13 items on what operating system? Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project?

  Your question immediately... you could try something like this

  In this scenario, you start with your video on video 1 track with the Timeline indicator placed in the appropriate location of content timeline.

  The Titler line file created will be automatically placed at the position of the indicator in the timeline.

  Text Menu/New/default of titration / and select the Section forms.

  The Titler file goes to Video Track 2 above the video on the video 1 track.

  Select the line tool in the section shapes and draw your line on screen correspond to the where you want it to appear in the video below.

  Your image of the line is the line on transparent background where the content below shows through the transparent areas in this image of the line.

  Please consider. If any questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• CAN´t draw lines

  I have can´t draw a simple straight line. I make a line then I click to another or to change the tool and the first line is deleted.

  You must have a current contour color I command to see the path.

  So, if you fill STROKE proxy looks like this

  

  then select a color in the color Panel or Swatches Panel or hit the smaller proxy above left to return to the default value
  parameters of a fill white one a black line, you might want to change that on no fill and leave the black outline.

  

  BTW if you all do a select, you will see the paths are there. You do not create really lies in Illustrator, you create paths.

  Now what you really want to do is to buy the book of Mordy Golding Real World Illustrator CS 4.

• What are you doing your brush so that you can draw on your lines, but not cover them

  The attached video shows a guy who draws and its lines are not get covered.

  https://www.YouTube.com/watch?v=88TlI2jzApg & List = PL5EqbUa7gwLHXt74Io5zJMWdTczwCgXb2 & index = 3

  Don't have the time to watch a video, but most likely it is based on a new layer above or below 'its lines'.

• Align 45 does not... Some opinions, I cannot draw a line at 45 and 90 degree angle with a line (for example to draw a straight line with SHIFT tool, select and line maintenance, form does not hang at increments of 45 as it was by default) it Note still wo

  Align 45 does not... Just noticed I can't align a line at 45 and 90 degree angle with a line (for example to draw a straight line with SHIFT tool, select and maintaining line, shape is not hang at increments of 45 as it was by default) it notes still works with forms & text etc, but not with a straight line. Having downloaded the latest January 14, 2016

  Last update fixed this Glitch, Illustrator please :-)

• How to draw a straight line and write on areas colored with Photoshop?

  I need to be able to draw a straight line and write about areas that I colored. I could do in PhotoStudio, but I don't know how to do in Photoshop.

  Use layers.  Text for writing on areas layers.  They can be changed.  You can change the text, font, size, color, Position, fusion and opacity and a layer style can be added.

  To draw the limes add a blank layer.  Select a brush and the color.  Left-click on one end of the line you want to draw. So without and the button to move the cursor to the other end of the line and press SHIFT + left.  Photoshop will draw the straight line between the two points that you clicked on.

  

• How to draw a cross line?

  <-cross Line

  Hello.

  I want to draw the cross-line using JavaScript.

  I can draw this line.

  app.activeDocument.graphicLines.add (not defined, not defined, undefined, {geometricBounds: [100,100,300,300]})

  but I can't draw this line.

  I tried to ' geometricBounds: [300,100,100,300] and [100,300,100,300] "but he did not.

  I tried to apply the transform option but line moved.

  It moves once again, but I want to simply left and right rollover.

  Any ideas?

  Thank you.

  Hello

  Try this out.

  var myLine = [];
  
  for (var j = 1; j <= 2; j++) {
          myLine[j] = app.activeDocument.graphicLines.add();
          myLine[j].strokeColor = app.activeDocument.colors.item("Black");
          myLine[j].strokeWeight = 0.75;
          }
  
  plotStraightLine(myLine[1], 100, 100, 200, 200);
  plotStraightLine(myLine[2], 200, 100, 100, 200);
  
  function plotStraightLine(obj, x1, y1, x2, y2) {
      obj.paths.item(0).pathPoints.item(0).anchor = [x1, y1];
      obj.paths.item(0).pathPoints.item(1).anchor = [x2, y2];
      }
  

• How to draw a smooth line (small in some places, in others) like in this picture

  

  Check the image I attached above. I need to design a different logo. But to draw like this because the two logos will be placed together (they must match). So someone knows how to draw the smooth line that is low in some places and large in others? How to add this effect? IM using Illustrator CS5.

  He number of ways yu area can make a brush with a thick and thin profile, or create a profile for a stroke, or you can draw paths with even simple traits and then survive strokes and adjust the width then

  or you can draw paths with even stroke and the use of the width tool to adjust the widths.

  It is with the paths with the same shots

  

  Here, after I used the width tool to adjust the width of the strokes

  

• Draw a horizontal line under condition

  Morning all,
  
  Need to draw a horizontal line inside a conditional when loop $v_case (that's the group column) is not null.
  
  How can I go there? can you help me?
  
  example of
  
  case: 1

  filed1   field2 
  data     data
  --------------------
  
  case2  filed2 
  data     data
  --------------------

  similar code that you can write in rtf
  
  ----------------------------------------------------------------
  

• How to draw a horizontal line

  Hello
  I have a region with 20 columns +, I want it divided into two sections and draw a horizontal line. I don't want to create another region. I have trired to add Stop 'and Start HTML table' but could not figure out how to draw the line.
  Can someone please advise?
  
  Thanks in advance
  Aali

  Hello

  you're right, create a new breakpoint and start HTML Table (label poster only)
  middle of your articles and seq number 30 means 30.1 like this
  and the label