How can I filter (send to trash) all non-English messages?

Similar Questions

• How can I filter the noises of thermocouple using a TC-2095 and SCXI - 1102c?

  Hi all

  I currently have four TC - 2095 s connected to the SCXI - 1102c inside an SCXI-1001 chassis cards. These thermocouples are floating and I get a good amount of noise (400 Hz 3 phases and same 60 Hz noise) when we turn on some equipment such as fans, and fans. Using this current set up, how can I filter the noise? Or I would need to put in place a new hardware configuration (e.g., the SCXI-1102 cards)?

  Hi RALoo,

  The 1102 C has a lowpass filter with a cutoff at 10 kHz frequency, so you will not be able to filter into the material with your current configuration.

  Your first option is to use a software filter.  LabVIEW has several functions that do this. More information can be found here: http://zone.ni.com/reference/en-XX/help/371361J-01/lvanls/filter_vis/

  The second option would be to change to SCXI 1102 cards as you suggest.  The low-pass filter of the 1102 was a cut-off adjustable to 2 Hz frequency, which will stop the noise of 400 and 60 Hz don't affect your readings.

• I need to reinstall my Linux Mint, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after installation Thunderbird)

  I need to reinstall my Linux Mint 17 companion, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after Thunderbird installation)?

  You will need to backup your Thunderbird profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring #Manually_back_up_the_profile

• How can I make a list of all bookmarks as my homepage?

  How can I make a list of all bookmarks as my homepage?

  You can set one of these pages as startup page:

  • chrome://browser/content/places/places. XUL
  • chrome://browser/content/bookmarks/bookmarksPanel.XUL

  The first one opens the Manager of bookmarks (library) and the second the bookmarks that see you in the box to Favorites (Ctrl + B; View > sidebars)

• How can I get my tab open all when update my firefox?

  now I'm still using very old Firefox 3.6.12 and I want to upgrede. I always using "save and exit" to my tab all open when quitting and not using bookmarks. total approximately 300 + tab open.
  I already try to upgrade my tab and once all is lost. and because of that I do system restore and reintall with old new.

  How can I get my tab open all when update my firefox?
  Sorry my English is a mess...

  already installed, but all the connection site became logout.
  and when right-clicking, page list too...
  and when I choose open in new tab or windown and something else happened...
  loading longer become page (already stop the other tabs)
  and when I block a text/link and drag it to the input tab or the navigation text or input search nothing happenend too...

  and when I close it, no other choice to save and exit...

  Edit:

  Resolved:

  1. Save and quit already solved with the help of addons.

  2. right click and drag the problem is already solved, I close firefox and restart.

  unsolved:

  1. all the connection still in State of disconnection site (can't stay as before connection).

  Edit:

  unsolved:

  2. on option, the images block list is missing.

• iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

  iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

  In-app music, press the "mini player" (the narrow ribbon at the bottom showing the song that is playing).  Which opens upward from the view of work full screen of the song being played - down at the bottom of this screen are icons for shuffle and repeat, press Repeat until the gray background disappears.

• How can I manually send music specific to my iPhone it draws from my computer?

  How can I manually send music specific to my iPhone it draws from my computer?

  Drag and drop music from the library onto the icon of the iPhone which appears at the top when your iPhone is connected.

• How can I share my library with all my devices

  How can I share my library with all my devices?

  In the article to share your iTunes library on your home - network Support Apple its pretty simple from what I've read, just make sure you have sharing options enabled in iTunes on your computer.

  Just make sure that you are signed in the same Apple ID on all your devices and turn on sharing House on each of them as well and make sure that you are connected to the same network, trying to share the library.

• How can I get my contacts and all the other stuff I had on the old email?

  Original title: I changed my email because they said my old email was invalid... How can I get my contacts and all the other stuff I had on the old email? They said, it has been deleted

  If my email isn't valid how I used it?

  Hello

  1. which email account you are referring to?

  2. What is the version of Windows installed on the computer? For example, Windows 7, Vista

  Please answer these questions and provide additional information so that we can better guide you.

• How can I print to hp photosmart all-in-one ipad 7280

  How can I print to hp photosmart all-in-one ipad 7280

  Hello

  But the C7280 is not active AirPrint, you can still print via the local network using HP ePrint mobile app.

  You can find the steps to get and use the application in the following document:

  http://support.HP.com/us-en/document/c02775166

• How can I get WMP to find all my songs that are stored on an external hard drive?

  I bought an external hard drive to store music for my product and WMP adds only about 30% of the songs to the Player library.  Some are wma and some are in mp3 format (added to the library and which must still be added).  I tried to uncheck Read-only after reading some responses online, but who did not stick and nothing changed.  How can I get WMP to find all my songs?

  I couldn't change them to read-only.  Fortunately after the computer restarts several times it work itself.

  Thanks for all the tips!

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• BlackBerry Smartphones how can I disable "sender wants to be notified" for emails I send?

  How can I disable "sender wants to be notified" for emails I send?   I did not know that it is on and apparently annoying.

  Any help would be appreciated.  Thank you!

  Open your main messages folder > Menu key > Options > E-mail settings > delivery confirm and confirm reading must be set to No, as well as send delivery and send read receipts.

• How can I generate a list of all the albums I have in my music library

  How can I generate a list of all the albums I have in my music library

  See http://answers.microsoft.com/en-us/windows/forum/windows_7-sound/how-to-print-a-list-of-items-in-the-window-media/6490fe4f-bb0e-4afa-97ca-3ce58c3aaeba

  but, if you only do this several times, you can use this procedure instead:

  Open a command prompt in your folder music [shift-right click on the name of the folder in the Windows Explorer & select a window of commands here]

  Run the dir/ad/b /s > AlbumList.txt

  Then open the text file in Word and he put away: -.

  Replaceyourusernamewith Nothing \Music\ C:\Users\

  Replace-with ^ t [the code of the tab]

  Select all, convert table to use the trademarks of the tab as column separators

  Select column 1 [the artists], and delete

  If there is garbage in all 3 columns - go just delete the columns thus

  That should leave a unique list of album names

• How can I force send a update saved daily report to the Group?

  We had a problem with some re3ports today and I need to return a couple of the daily reports that are automated.  How can I force send two reports after they have already been auto sent earlier (if necessary).  I'm in E9

  I had this problem before:

  Locate the saved report.

  I will usually through: assess->-> report Admin report

  If it is part of an update by e-mail, I pull up the specific agent and then return the update by e-mail by clicking on options and selecting "send the Email of Test."

  If it is not part of an update by e-mail, I isolate the report saved as reports and export data by accessing the saved report and then click Preview report saved.

  There might be an easier way to do it, but it always irritates me data in a pinch: D

  I hope this helps.