How can I fix journal.exe cannot initialize 0xc0000006 error?
I am running windows xp on a motion LE1600 tablet. I just got this computer and windows journal does not start. Whenever I try to launch it I get the message could not initialize the 0xc0000006 error journal.exe, click on ok to terminate the application. the message always appears twice in fact.
All other programs start without a problem, including other programs that use the features of the tablet.
I tried to run cmd journal.exe /repairnote suggestion I found on other forums, but this did nothing and error poped again the utility ran.
Any input would be greatly appreciated. I won't cry if I can't use windows journal, but it would be good to run :)
Most of the time these errors are due to problems with the .net Framework.
I suggest that you update to the latest version of .NET Framework.
Microsoft .NET Framework 3.5 Service Pack 1
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7#SystemRequirements
http://support.Microsoft.com/kb/959209
I hope this helps.
Marilyn
Tags: Windows
Similar Questions
-
HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)
Hello
Please do not type in capital letters because it's difficult to read and considered to be shouting.
---------------------------------------------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E which is also 0x1000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">-->
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-----------------------------------------------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How can I fix adobe first pro start application error (0xc000001d) on windows 7?
How can I fix adobe first pro start application error (0xc000001d) on windows 7?
All my other adobe programs seem to work well.
What I have to do.
Hi John,.
Update first Pro CC 2015 (9.2).
Thank you
Kevin
-
Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I can't open any pdf on my computer now.
If you have purchased Adobe Acrobat Pro DC as an upgrade, then a serial number of the previous version which you have like Acrobat X or XI. If in the case where you have not bought one of these in the past, then you must buy Acrobat Pro DC as full version (US $449.00).
In this scenario, you can return the version upgrade and purchase the full version. To return the Contact Customer Service
Thank you
Abhishek
-
How can I fix an ocBrowserHelper_1.0.4.106 error message
When I restart my computer, I get an error box that has a message that says:
Run the DLL THAT there was a problem from C:\***\AppData| Roaming\OpenCandy\ 36CC7E49FC56432F98EDC622795620CE\OC BrowserHelper_1.0.4.106.dll
The specified module is not found OK
The asterisk * symbols are the name of my computer. How can I fix it, I can't find any explanation on what is the cause or how to fix it. Once I click OK it goes away for awhile. I ran programs, MSE, antivirus, malware, I restored my computer to an earlier time - nothing has worked. How can I get rid of this annoying error message?
Hello
I suggest to start the computer in a clean boot and check if you are faced with the same question.
Follow the link below to perform the clean boot:
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: please go through the section: how to reset the computer to start as usual after troubleshooting by clean boot of Kb to start the computer in normal startup after's article have solved the problem.
It will be useful.
-
How can I fix msconfig.exe appcrash? Thank you
Signature of the problem:
Problem event name: APPCRASH
Application name: msconfig.exe
Application version: 6.1.7601.17514
Application timestamp: 4ce78d12
Fault Module name: msvcrt.dll
Fault Module Version: 7.0.7600.16385
Timestamp of Module error: 4a5bda6f
Exception code: 40000015
Exception offset: 00056202
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 3081
Additional information 1: ad48
More information 2: ad48e6fd9d0267a9e565a3aa7798d3c1
3 more information: 9bc7
Additional information 4: 9bc761b64752797f7db97578338a30d9Hello
Run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228#appliesTo
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
How can I fix mf_status.exe error messages when you click on the button stop?
- The exact error message:
The instruction at 0x00000000 referenced memory at 0x00000000. The memory could not be read.
Click on OK to terminate the program.
- Operating system Version &:
Windows 7 Home Premium
Service Pack 1
System manufacturer: TOSHIBA
Model: Notebook
Note: 4.1 Windows Experience Index
Processor: AMD Athlon (TM) II Dual-Core Processor 2.10 GHz
Installed memory (RAM): 4.00 GB (usable 3.74)
System type: 64-bit Operating System
Pen and touch: no pen or press enter is available for this view
- Version of the browser &
Internet Explore 10
Version: 10.0.9200.16540
- No software or hardware that I recently installed or deleted
MediaFire Express BETA for Windows
Version: 0.15.4.4888
- Any recent changes I made to the system
I accidentally click the disk wiper in CCleaner. Does this affect my system?
- The things that you have already tried to solve the problem
http://www.pcmaxutilities.com/wikidllfiles/mfstatus-exe-error-fix-Guide.html
I also downloaded: MFStatus.exe files repair tool
Any help will be much appreciated. Thank you! :-)
Hey Ken, COLIENNE,.
Let me to interfere here because I met the same problem, and I followed method 1 suggested by jojo.
And the problem comes from MediaFire Express, even if it is not in beta for me.
Windows Vista SP2.
Hope I helped a bit...
Sincerely,
Bertrand -
How can I fix natspeak.exe errors?
First installed Dragon 12. It worked long enough for voice training.
Later the program start failed and after uninstalling and reinstalling, I get "error 2753." natspeak.exe is not marked for installation. »
The installation fails.
TMT
Suggest that you only contact them they know that their best software. I suspect a registry problem, but am not sure.
-
How can I fix the 800cccdd or the fatal error: invalid argument errors?
I installed Windows Live Mail on the client with Windows XP Pro SP3 machine after having problems with Outlook Express.
I migrated their accounts more and they have the same problems in two e-mail clients."Your IMAP server closed the connection. This can happen if you have left the connection idle too long. »IDLE completed
Configuration:Account: * e-mail address is removed from the privacy *.Server: mail.example.co.ukUsername: info + example.co.ukProtocol: IMAPPort: 143Secure (SSL): 0Code: 800cccddOther times I may receive this error message:We received a notification on your ' * address email is removed from the privacy *' account: Fatal error: Invalid argumentI tried this on other computers that are running Microsoft Outlook and Mozilla Thunderbird, without errors or problems.He was works well, only recently, we started to see this question, no changes on the server or the client have been changed (to the best of my knowledge).Can anyone say more?Thank you.I deleted a double "Junk E-mail" folder by using the mapi connection (could use OWA) and then was able to use the Imap Protocol. I hope this helps.
-
How can I fix this 643 and 80070643 trying MSN messenger error code
How can I fix these 2 643 and 80070643 error codes. Im trying to install msn messenger. thanxs
Hi Freebyrd,
I guess you are talking about Windows Live Messenger because MSN Messenger doesn't really exist anymore. If you try to use an old record or old 3rd party Web site to install it, you must obtain instead here: http://explore.live.com/windows-live-messenger?os=other.
If this isn't the problem, you must get help from Windows Live Messenger Support.
This is the Portal main support: http://windowslivehelp.com/product.aspx?productid=2&version=15.3.2804.0607.
Here is the forum where you can post your questions to get assistance from experts in Windows Live Messenger: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec.
The following support article resolves this error when installing in case it might be useful: http://windowslivehelp.com/solution.aspx?solutionid=bfd9421a-7379-40f4-8a8c-6a443484ac0e.
I hope this helps.
Good luck!
-
Re: Cannot connect - how can I fix the error "Bad Winlogon.exe - Image"?
Last night, my laptop did something weird. The screen is blue and it has conducted an audit. The audit was in three parts (that's all I remember) once this is done, my laptop back running and it worked very well.
Later that morning, he crashed and restarted, but when it comes to where he usually displays user logons, it came with an error message. The title was winlogon.exe - bad image
and the message describes how the file is incorrect.Now, my laptop won't let connect me. How can I fix it?
It seems that the file system was corrupted unfortunately he touched one of the important files needed for windows to boot.
You will need a bootable CD to repair the problem for that I recommend Microsoft Diagnostics and Recovery Toolset, you can download from http://www.microsoft.com/downloads/details.aspx?familyid=5D600369-0554-4595-8AB4-C34B2860E087&displaylang=en
Run the Setup program, go to the installation folder and burn "erd50.iso" as an image (not a data CD) file using software such as Nero.
Then you need to boot from the CD I do not know how it comes to your laptop so check the manual or change the boot order in BIOS whether it is the method as start the recovery disc.When the software is loaded will ask that the Windows installation you want to repair if no disc i.e. C: is offered in the drop-down list, then you may need to change the BIOS setting regarding the AHCI mode, compatible and under tension when you are finished.
If drive C is visible then the hard drive is accessible, however, you must select "does not fix an installation of Windows." and click OK.Click Start, then select "Command prompt", you will get a black box with white text.
type the following command and enter: chkdsk c: /f /r
This command will perform a full scan of your hard disk and correct any errors, he can find that could take up to 45 minutes depending on the size of your disk.
When he finished closing and restart your laptop without the CD in the drive, if you have changed the AHCI mode in the BIOS then change back.If Windows still doesn't boot then boot from the CD again and restart "Command Prompt".
type the following command and enter:
c:
cd\windows\system32If entered correctly your screen should display: C:\Windows\system32 >
type the following command and enter: (Note: the point is necessary and not a typo)
Copy dllcache\winlogon.exe. /y
If all goes well you should see a message: 1 file (s) copied.
Stop the laptop restore all the BIOS settings and hopefully Windows will boot again normally. :)
Richard S.
-
How can I fix sfc cannot repair the military record [I: 24 {12}] 'settings.ini '.
Original title: System repair
Hello
You can safely ignore the error messages in the CBS.log file. The SFC.exe command falsely reports the Settings.ini file information in the CBS.log file.
The SFC.exe command reports Settings.ini file errors in the CBS.log file after you add gadgets to the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file
http://support.Microsoft.com/kb/947595Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833 -
This message p [ops upward when I run iTunes]
Money cannot connect to the store purchases.
If you have any firewall software, make sure it has been set to allow communication on port 443.
How can I fix it?
me too... same problem... just started
iTunes can't connect to the store purchases.
If you have any firewall software, make sure it has been set to allow communication on port 443.
MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23
-
Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?
Hi PTTimothy
1. what operating system is installed on the computer?
2. you are the administrator of the computer?
I suggest you to check and to provide us with the information about the installed operating system.
Step 1:
You can open the administrator and verify if you can open Windows Easy Transfer correctly.
You can even check if you face the same question in the user account different or new user account. You can create a new user account on your computer, and then check.
Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountStep 2:
An analysis of the SFC and audit-
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833I hope this helps.
-
How can I fix error HPSF.exe for HP support assistant?
I have a HP Pavilion dv6 notebook. HP support assistant has stopped working. I get a message indicating HPSF.exe has encountered a serious error. How can I fix it?
Hello
Try the following
Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the laptop.
Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.
http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html
After installation, restart the computer again.
Kind regards
DP - K
Maybe you are looking for
-
Updated after the 9.3.5, I still have started from playlist in the music.
-
Add a SSD to a HP ENVY 15-J030
HelloI just acquired an HP Envy 15-j030 and I find the 5600 RPM a bit on the low side. I was wondering if I could improve it with an ssd (246GB) and use an external hard drive for my large files? I read something only support 24 GB ssd? If this is th
-
Hello I bought yesterday new laptop HP ENVY 17-j162no. The first time (and each time later) I started the laptop, I had a smart drive failure error. I have never on any known computer that even after such a mistake, nothing seems to be broken. I went
-
LAN-to-LAN tunnel between VPN 3000 and Cisco 1721
Hello I have a current LAN-to-LAN tunnel configuration between VPN 3000 (3.6) and Cisco 1721 (12.2 (11) T). When I use the encryption = authentication and Des-56 = ESP\MD5\HMAC-128 for the IPSec Security Association, everything works fine. However, I
-
Hey, being a * and with a very small screen I just mistakenly purchased Photoshop Elements instead of the first. How can I cancel the order of photoshop and get a download of PRE14 instead?