How can I get rid of the black box around my video exported?

Similar Questions

• How can I get rid of the black box around the exported video?

  I am importing video recorded with OBS in resolution 1920 x 1080. Watch the video, it seems fine. But once I run the video in Adobe first Elements 9, when I export it as a file .m2t in resolution 1920 x 1080, it has a thick black box around the video. The video source is in .mp4 format. Can someone help here?

  Versions prior to version 11 of Premiere Elements must have their projects manually configured to match the source media.

  Start a new project, in the project Panel, click settings and select project settings that correspond to your video specifications. This can be difficult because you are not editing video camcorder but the video which is produced by a third-party software. You will probably need open a sample of this video G Spot or Media Info in order to get the exact resolution, the frame rate and audio and video codecs that are in use - and, in the Premiere Elements 9 version, these codecs are not fully supported.

  You can try the free download of version 13 and see if it works better with your video. Earlier versions of the software were much greater with sources video camcorder and non-standard.

• How can I get rid of the black border around my screen?

  After an update, my screen resolution changed for no reason. Tried to change, but now I have a black border around my screen that I can't get rid of.

  Hello

  Windows Update will sometimes offer you updates of graphics drivers; NEVER accept them.

  Only go graphics drivers of your computer or the manufacturer of the graphics Web site map.

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is the information on the Windows updates.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• How can I get rid of the blue box around hotspots?

  Hello

  I added three hotspots to this Web site, but after clicking on them he let a not-so-nice blue box around them.

  http://chanlegge.com javascript:; http://chanlegge.com/

  I would like to point out also that they appear for me in Safari and Chrome, but not Firefox.

  I'm a complete Blockhead when it comes to webdesign (as you can see, the site is essentially just two JPEG files) and don't know CSS etc, but I hope that there is a simple way to avoid these. Any ideas?

  Thanks in advance,

  Johnny

  In fact, it is a function of web accessibility.  The active state of the focus on the link shows people where they are.  You don't like it, but it serves a purpose.

  Nancy O.

• How can I get rid of the blue circle around my pointer

  How can I get rid of the blue circle around my mouse pointer

  Means generally that some process is being run/load

  When and under what circumstances this happens, all the time or with a specific program?

• How can I get rid of the black edge on windows 7

  Original title: Black border on Windows 7

  Hello, does anyone know how I can get rid of the black edge on windows 7 I already try to change the resolution anything happen how can I solve this problem

  Hi Burton,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you are facing the issue with your monitor and get a black border around the screen. Even after changing the resolution problem persists.

  I suggest you try the steps provide below and see if it helps.

  Method 1:

  Check the link and try to run the Troubleshooter:

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  I suggest you to update the display drivers and see if it helps.

  Steps to update the drivers for the display (graphics card).

  1. Click on start.
  2. In the option of Search type please run.
  3. In the run window, type devmgmt.msc.
  4. Then in Device Manager right click on graphics card.
  5. Expand the display adapter.
  6. Try to update the drivers of the option that automatically update the drivers.
  7. If it works fine, if not try to check for drivers using the model number of Display Adapter.

  For more information you can check the link below:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7

   

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• How can I get rid of the text box in InDesign CS4?

  For some reason, I can't get rid of the surrounding area of my text, how can I get rid of this? The text is also a link so...

  Thanks in advance...

  Open hyperlink Panel, double-click your hyperlink under URL field. Set your appearance of hyperlink´s the form of Rectangle Invisible...

  

• How can I get rid of the black pillars on the side of the video

  I created clips in Premiere Pro using the following parameters:

  1920 x 1080

  25 fps

  Square pixels

  After exporting my composition, After Effects (Quicktime, MPEG4), I created a new project (PAL, 1920 x 1080) and imported my images.

  Then, I created a new timeline for my images.

  However, the timeline shows two black bars on the left and right of my images. They are thin bars on wide 25px.

  How and what to do to get rid of them.

  When exporting Agency, try scale to fill or to scale of adjustment in your export settings screen

  In addition, if you create a DVD, you export using the MPEG2-DVD preset to create assets for reminder

  I do not have Blu - Ray, so I'm not sure of the size to the author a BluRay disc

• How can I get rid of the server box that keeps popping up every 2 seconds?

  The area of the server is a small box that has my server, the user name and the password.  Then has the small checkbox next to save this password in your password list.  Then has 2 small boxes under this sentence that says ok and cancel.  Upward into the left corner of the small box is a button key and tag or readio symbol.  With the sentence next to the symbol that says enter your user name and password for the following server.

  I can't get this box to stop religiously coming every 3 to 5 seconds.  I need help. If someone feels that he can call you my 775 800 1956 number to give me the answer.  Thank you.

  Crystal Geng

  Contact your server administrator / system administrator.

  Unplug any network drive shares.

  Check your Outlook (if you use) configuration.  Solve all the problems.

  Restart the computer.

• How can I get rid of the line dotted around objects flash and links?

  I am trying to remove the line dotted around flash objects and links in Firefox 16.01, but I don't know how to find Firefox CSS or what might work to do this. Setting the value of the ring 0 in: config didn't work.

  Please make sure that you change the _width, _style no preference.

• How can I get rid of the black bar that appears in the middle of the screen every time I have set the basic like the volume control features, or brightness levels?

  Hi, can someone help me with a really annoying (and I'm sure a simple to fix) problem?  I don't know if it's related to Windows 7 or if it's just my laptop plays up.  I recently upgraded to Windows 7 from Visa and whenever I have increase/decrease noise, brightness, etc (no matter if I do this using the key on the keyboard or via the control panel), a black bar appears in the middle of the display, indicating the levels that I'm reaching with the adjustments.  It's useful... except it does not disappear after that I'm done.  The bar stays there for all the time that I am connected and text blocks, images on the screen that I can't minimize or even move it out of the road.

  Hi, can someone help me with a really annoying (and I'm sure a simple to fix) problem?  I don't know if it's related to Windows 7 or if it's just my laptop plays up.  I recently upgraded to Windows 7 from Visa and whenever I have increase/decrease noise, brightness, etc (no matter if I do this using the key on the keyboard or via the control panel), a black bar appears in the middle of the display, indicating the levels that I'm reaching with the adjustments.  It's useful... except it does not disappear after that I'm done.  The bar stays there for all the time that I am connected and text blocks, images on the screen that I can't minimize or even move it out of the road.

  Hi Mkum

  The bar you describe look like this image?

  

  If so, this is part of the HP software that is installed on the computer.

  Here is a link to the HP support forum where this utility is supported.

  Desktop PC noise and acoustic - HP Support Forum

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• When you use illustrator, how can I get rid of the black background when I move my windows file tab? I want to expose my wallpaper when I move windows not a solid black base? display settings that I need to change?

  

  Go to window > Application frame

• How can I get rid of the default box on a newly created empty pdf? Has anyone not seen this? It gets in the way!

  A previously requested but so far no response which surprised me because there must be something others have encountered - it's so obvious and 'in your face': is it possible to remove the box by a blue line that is default and centered on the page A4 everytime I create a blank pdf to add fields to- or indeed to convert an existing pdf. It will not allow me to remove it, is not a text box and just gets selected every time that I try to pick anything close to her!

  Thank you in advance to anyone who can answer this crazy problem.

  Well, you selected the append text tool... What happens if you then

  Switch to the hand tool? In my view, that it will not disappear simply.

  The game, October 9, 2014 11:26, acrobition [email protected]>

• How can I get rid of this black box in slide show?

  IM design my Muse 2nd site and have a miniature slide show that shows a solid black rectangle off to the side when it is in preview mode. In design mode, I can see the selection of the area only when I select all. its in the slideshow (not the slideshow itself) widget and I can't select to him only to delete or limes.

  any ideas?

  Thank you!

  It has been unlocked. Thanks for the suggestion.

  but I found it was a matter of choice. I had to select all and then click a corner point about 6 times so he can select on the single rectange. hope this helps someone else.

• How can I get rid of the preview box?

  A preview area appears in the e-mail list box. How to disable that?

  Press F8 to toggle the Message pane.