How can I get the correct AppID is displayed?

Similar Questions

• How can I get the correct product key for my sleekbook want PC4

  How can I get the correct product key for my sleekbook desire 4 PC

  Hello

  As mentioned in your other post you can get it from Microsoft with your money:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/i-purchase-envy-notebook-PC-4-1100se-how-can-i-get-the/m-p/2853225

  Kind regards.

• Try to install Adobe Acrobat Pro DC and it doesn't accept serial number, incorrect serial number is entered.  How can I get the correct serial number to enter?

  Try installing Adobe Acrobat Pro DC and it will not accept the serial number.   Receive the message invalid serial number.

  How can I get the correct number to enter?

  Hi chrise68847178,

  You can check your serial number of this link:find the serial number of your product Adobe quickly

  Also, you can check this link:error of incorrect serial number

  Let us know if that helps.

  Concerning

  Sarojini

• How can I get the correct product key for my laptop?

  Hello I bought my Pavillion dv6707 us in TI 2008 has Windows Vista Home 32-bit (OPS).

  I just got a notice saying that my (OPS) are not authentic I have 2 key 1 products in the software 89578-OEM-7332157-00061 the other is on the bottem of my laptop that I can almost distinguish as V6KPX-BFMJF-DM7QP-T3X7B-QCQDD how can I get the right pair?

  Hello

  Those at the bottom of the laptop is for the operating system on your machine.

  Kind regards.

• How can I get the data view to display the same amount of time I save?

  I use the Sound and Vibration Measurement Suite.  In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall.  I am also showing strength in numbers group for several bands and doing cutting-edge research.  I record 100 ms of the transient wave.  In the data view, why the temporal plots show several seconds of data?  What determines how much time will appear in the data view?  More important, the power spectrum reflects the power for the entire of several seconds of data displayed?  Same question for power in the values of band and cutting-edge research.  I want to just this data displayed for 100 ms of the wave that I record.  So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?

  Finally, what is the best way to make account concisely the recorded data?  By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc..  I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care.  Help?

  Hi TimRsandiego,

  SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.

  If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:

  Let me know if you have any other questions.

  Kind regards

• I just placed an order and I have a mac computer. The download I received was widowed... How can I get the correct download after I already paid?

  I need to know how I can get the correct download for my Mac computer?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)

  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• How can I get the correct codec?

  I copied a music file & tried to paste in my movie in movie maker, but it says that I don't have the right codec on my computer & need to download a. I have Vista. Could you tell me where to find the correct codec?

  Thank you

  Gloria

  Find what audio and video codecs you need using GSpot
  http://www.Afterdawn.com/guides/archive/find_what_video_and_audio_codecs_to_use.cfm

• Using the smart keyboard, I get invalid characters in the standard IOS search box. How can I get the correct character to use?

  The intelligent keyboard on my iPad Pro works fine all the time except when I go to the search feature of iOS. As soon as I go ahead and start typing I'm extended character set characters rather than the face value of the keys I hit. Is there a setting that changes the character set used by the search feature with the Smart keyboard? On-screen keyboard works fine, but it's a nuisance by disconnecting the Smart keyboard everytime I want to search for.

  Thank you

  Steve Lewin

  What you get in the search box when you type asdfg?  Is - this ass∂ƒ?

  What language your OS and keyboard are set on?

• How can I get the correct email address for the Australia?

  How do fix this email Add. in Austraila * address email is removed from the privacy *.

  I tried to email this lady but they say they cannot find the e-mail address & I just got it this morning

  Hello

  The deleted forum software e-mail address in order to preserve the privacy of the recipient.

  Check the address for common errors such as:
  1. a space in the address
  2. a period after the com, net, etc.
  3. If you have copied/pasted the address, make sure that there is no space after the net ETC, com.
  4. a misspelling or typo.
  5. sometimes when an address is highlighted, you don't see a required underscore character.

  Hope this helps,
  Don

• How can I get the correct dates on photos for a Windows photo album

  The dates on the pictures imported from the disk on which I downloaded them aren't dates that I took them. Tried FixIt program twice, but it has not solved the problem. CA

  Hello

  I suggest you refer to the link provided below to change the date and time a photo was taken.

  Change the date and time a photo was taken

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  See also:

  Create a professional photo album today

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-professional-photo-album-today

• How can I get the correct sliders in the basic Panel

  I have named 'Recovery', 'Fill light' and 'Black' I want the standard sliders that are named "Highlights", "Shadows", 'White' and 'Black' sliders

  These settings are only available in the LR4 LR5 &. You are using an earlier version which has process of 2010?

  If you LR4 LR5 simply go to the camera Calibration tab in develop Module and click on process of 2012.

• How can I get the printer icon to display on the toolbar

  For some reason, the printer icon disappeared from my toolbar.  How to get to show once again?

  For some reason, the printer icon disappeared from my toolbar.  How to get to show once again?

  What 'toolbar '?

  Internet Explorer toolbar?

  If Yes, open Internet Explorer > right-click on one of the icons such as House, security, etc etc, Page > click Customize > click Add or remove commands > box on the left, scroll and select printer > click Add in the Middle > printer is now on the right box > if you want to move it to a specific location, click on it and use the button move up or move down > click on close when finished.

• How can I get the keyboard to display in the simulator of Dev Alpha?

  Hello

  I use the Dev Alpha Simulator to test my apps of Cascades, and I need to type text in the fields in my application. I can just click and type the keyboard of my Mac, but capitalization does not work. So, how can I get the BlackBerry keyboard to display on the simulator - so that it looks like a real device?

  Thank you.

  Hello
  You can click on the lower right corner, and the keyboard will be visible.

  Kind regards

  Sommily

• in newly improved LR6.4, when I want to import from SD card, the images are in a random order, not the order that I pulled on them.  Images are scattered.  Once imported, the images are correct. How can I get the import to be in the order that I pulled on

  in newly improved LR6.4, when I want to import from SD card, the images are in a random order, not the order that I pulled on them.  Images are scattered.  Once imported, the images are correct. How can I get the import to be in the order that I pulled on them?

  Is there a sort option near the bottom of the import screen. Have you tried different sort options that are available?

• How can I get the address of the memory of a table?

  Hi all

  Please bear with me, as this can be confusing. Let me know if you have any questions.

  I have a CCD of Hamamatsu and an external DLL that comes with it that I use. I call the "DcamCapture" function - this sends the capture command to the CCD.

  Its documentation:

  "BOOL DcamCapture (LPVOID pImageBuff, INT nBuffSize)

  [Summary]
  Begins to capture an image of the device.

  [Arguments]
  pImageBuff specifies the start address of the buffer where the image data is
  to be stored.

  nBuffSize specifies the size of the buffer (number of bytes).

  [Note]
  (1) this function emits an instruction to begin to capture the image. Since the image
  capture is not complete even when the function is completed, use the DcamWait

  function to check if the image capture is complete. »

  The "BOLD" is my own. So after that I called this function, I have to call DcamWait. The problem is, from this point, labview has already written the pImageBuff to its indicator variable - in fact, he wrote immediately after the return of this function. But before that data has even written to memory! So I go out exactly what I put in - an empty array.

  In C++, this isn't a problem. What they do in their code for the example is call DcamCapture, DcamWait in a loop, and then dereference the pointer pImageBuff once all this is done.

  I don't know how to dereference the pointer of table in Labview.

  So I have to, as a clumsy hack, call DcamCapture TWICE. I first call DcamCapture, then DcamWait, then DcamCapture again - this time, I use the FCM to dereference the pointer, pImageBuff, which has the correct data (now).

  -How can I get the location of the memory of the pImageBuff? And then, how can I access it?

  Thanks for your help. I called NOR and they 'think' about my problem - I would see if anyone here can come up with a solution.

  You can do this by using the functions of the memory manager of LabVIEW, you call by setting the name of the library to 'LabVIEW' in the call library function node.  The functions you need are DSNewPtr, MoveBlock (which in fact copy of data) and DSDisposePtr.  There are short documents on these functions using LabVIEW.  You need to call DSNewPtr to allocate the memory, switch to the DCamCapture, loop on DCamWait, use MoveBlock to copy this pointer data in a table that manages LabVIEW and finally free the pointer.  Here is an example of a similar sequence: http://forums.ni.com/t5/LabVIEW/array-pointer-from-dll/m-p/1217453#M519958.