How can I get the engine move TETRIX VI is back?

Similar Questions

• How can I get the engine working in the ASA 5505 Crypto

  I bought a brand new ASA 5505 to connect to the Cisco 3640 and I can not yet set up the tunnel. I have tried to change the set of transformation to just but know luck. I recently put a VPN using DMVPN and Cisco 501 in a site-to-site, but it has been wondering what happens.

  The router (3640 executes code 12.4) seems ok and I don't think I have a problem with the router with Cisco 501 great work.

  This is a laboratory environment.

  This is the function defined on the ASA 5505

  The devices allowed for this platform:

  The maximum physical Interfaces: 8

  VLAN: 3, restricted DMZ

  Internal guests: 10

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Peer VPN: 10

  WebVPN peers: 2

  Double ISP: disabled

  Junction ports VLAN: 0

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  Assessment of Advanced endpoint: disabled

  This platform includes a basic license.

  This is a ping from 10.3.4.10 to 10.1.1.1. He said nothing about IPSEC or ISAKMP.

  That's what I get when I do the: show crypto ipsec his

  ASA5505 (config) # show crypto ipsec his

  There is no ipsec security associations

  ASA5505 (config) # show crypto isakmp his

  There is no isakmp sas

  Debug crypto isakmp 10

  entry packets within the icmp 10.3.4.10 8 0 10.1.1.1 detail

  I have worked on it for a week and don't really know if I have a bad ASA5505. Since the normal stuff like browsing the Internet works and I can ping to the outside and inside, I don't know what to think. See attachments.

  "Do what you asked has worked.

  Nice to hear that your problem is solved.

  "My question is can I use the transform-set ESP-3DES-SHA instead of MD5?"

  Of course you can.

  Kind regards.

  Please do not forget to note the useful messages and check "Solved my problem", if the post has solved your problem.

• How can I get the 'free space' in my SSD back?

  I tried to install windows via boot camp on my macbook air 2013 Wizard but I got an error during partitioning and restarting the laptop now I'm stuck with my Macintosh HD impossible to return to full capacity. So I tried to search the net to find answers, but I could not find. I have about 55 GB of free space, how could I get it back? I'm also on El Capitan. My ssd is 250 GB and macintosh that HD used to identify all 250 now it is stuck at 199 - ish. Thank you!

  Have you tried to use Boot Camp Assistant to delete the partition that it created? If you do not, then you should give it a try. If instead you tried to solve it using disk utility, then you have garbaged s disk RDB. Either you can take a long time to find out how to solve this problem using the Terminal or you can clone your OS X volume to another disk using disk utility or Carbon Copy Cloner, boot from the clone, erase your internal drive, the clone of restoration on the internal drive, then restart your computer from the internal drive.

  Step 1: Fix the hard disk and permissions

  Boot from an OS X install disc

  1. Insert the OS X installation disc into the optical drive.

  2 restart the computer.

  3. immediately after the ring, press and hold the C"" key.

  4 release the button when the spinning gear under the Apple grey dark

  logo appears.

  5. wait for the installer to finish loading.

  Boot from a recovery HD:

  1. reboot the computer.

  2. immediately after the ring, press and hold the

  'ORDER' and the set of keys 'R '.

  3. release the keys when appears the utilities Menu.

  After the installer loads, choose your language and click on the button continue. When the menu bar appears, select disk utility from the menu of the Installer (the menu utilities for Tiger, Leopard or Snow Leopard).

  For Lion or later select disk utility in the main Menu of public services.

  After disk utility loads select your entry from hard drive (to mfgr. ID and Player size) of the list on the left.  In the disk utility status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If Disk utility reports errors, that it can not solve, then Disk Warrior or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  Second stage: Remove the old drive and install the new drive.  Place of the old drive in an external USB enclosure.  You can buy one at OWC , which is also a good supplier for the readers.

  Step 3: boot from the external drive.  Restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager appears.  Select the icon of the HD to the external hard drive recovery, and then click the arrow pointing down.

  Fourth step: new preparation of the hard drive

  1. open utility disk in the utility Main Menu, then click on the continue button.

  2. the disk utility charges and then select your new hard drive (it's the entry with the)

  MFGR. ID and size) from the list on the left. Note the SMART status of

  the reader in the status area of THE.  If it says not "verified" and then the player

  is failing or has failed and will need replacement.  Otherwise, click on the

  Tab in the main window of the disk utility partition .

  3. in the title of the Volume entitled plan defined the number of partitions from

  the drop to one. Set the type of Mac OS Extended format

  (Journaled). Click the Options button, set the partition scheme

  GUID then click on the OK button. Click on the Partition/apply button and

  Wait until the process is completed.

  4. Select the volume you just created (it's the auxiliary input under the)

  entry by car) from the list on the left. Click on the Erase tab in THE MAIN

  window.

  5. set the type of format Mac OS extended (journaled). Click on the

  The button options , check the box for zero data and click OK to

  return to the window to erase it.

  6. click on the delete button. The formatting process can take up to several

  hours depending on the size of the disk.

  Fifth step: clone the old disk to the new disk

  1. Select the destination volume in the list on the left.

  2. click on the tab restore in the main window of THE.

  3. check the box labeled destination Erase.

  4. Select the destination volume in the left list and drag it to the

  Destination entry field.

  5. Select the volume of the source of the list on the left and drag it to the

  Input source field.

  7. check you correctly, then click on the restore button.

  Destination means the new internal drive. Source means the old external drive.

  Step 6: open preferences Startup disk and select the new internal volume.  Click restart.  You should boot from the new drive.  Eject the disk and disconnect it from the computer.

• How can I get the extention mov to play in mediaplayer 11

  I'm trying to repair corrupted in my quicktime software files or get my videos from files on media player. I am running vista home top sp2 and media player 11 it tells me quicktime files are missing or corrupted.

  Hi Mikebradley,

  Welcome to the Microsoft Community Forums.

  From the description, it seems that you are facing problems while installing the Windows updates as back updates.

  For you help I would be grateful if you could answer the following questions:

  (1) did you changes to hardware or software on your computer before the show?

  (2) you get an error message / code?

  (3) what is the version of the QuickTime software installed on the computer?

  I'm sorry to inform you that there is no option to move the file extension.

  Click on the link and follow the steps

  http://support.Apple.com/kb/TA25074?viewlocale=en_US

   

  If you need assistance regarding the iTunes, I suggest you to contact Apple iTunes Support.

   

  https://www.Apple.com/support/iTunes/

   

  This information should help. If you need help with Windows, thanks for posting. We will be happy to help you.

• In windows movie maker, I'm trying to open an old project. It opens, but there is no video clips - only x or empty clips. How can I get the original film clips show?

  In windows movie maker, I'm trying to open an old project. It opens, but there is no video clips - only x or empty clips. How can I get the original film clips show?

  I did a movie and released a dvd. Then, I moved my files from movie on an external hard drive to store files and free up space on my computer. So I went back to try a pull up the project and got every X / white clips. So now, I rebooted my computer with the video files I removed on the external hard drive and it still shows empty clips.
  Help.

  The red Xs indicate that Movie Maker cannot find the original source files.
  If the files are still available... just right click on the red Xs and go to the
  current location of the files source and you may be able to restore the
  path.

• How can I get the tabs to go on a single line and a menu of Firefox?

  Firefox allows to have 2 lines above - Firefox menu with tabs and more and another line of the navigation toolbar. during the installation of some programs online, Firefox now have 3 lines at the top, with the Firefox menu on an entire line, the 2nd line of tabs and 3rd line of navigation toolbar. How can I get the tabs to go on a single line and a menu of Firefox?

  With the current versions of Firefox, you can choose to use the menu of Firefox (orange in windows; gray Linux) button at the left end of the Windows title bar or bar menus familiar as in earlier versions. The Firefox button is displayed by default only in Windows Vista and Windows 7, but you can turn on or off or switch between the two or temporarily show the menu bar when the Firefox button is displayed.

  • See how, click here-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox#w_why-are-the-menus-file-edit-view-etc-missing
  • Other changes after the upgrade-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox

  If you chose to use the Firefox button and you use the default tabs on top, the tab bar will move to the title bar with the Firefox button only when you are to maximize window (the ' square' the middle button in the upper right corner of the Windows standard application window). Other selected toolbars will be displayed below that (bar Navigation, Bookmarks Toolbar and the toolbars you add via Add - ons).

  • For toolbar, see Selections-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• In Windows Mail how can I get the answer, menu forward on top of the menu bar on the emails?

  In Windows Mail how can I get the answer, menu forward on top of the menu bar on the emails?

  I don't think that you can move the toolbar above the Menu bar. Or is the toolbar missing? If it is not present, right-click on an empty spot on the menu bar and check the toolbar.

• How can I get the back windows of file I deleted - fwlink.asp

  I have Windows XP Edition version 2002 with Service Pack 3 family.  I did a virus scan.  During the analysis, I deleted a file that has been damaged by a Trojan Virus.  How can I get the file back.  This is the microsoft file fwlink.  I have lost the original supplied with my computer disks so I can't restore the computer.  Is there a way to get this file.  I don't have the MCSTRM service (event ID: 7000).  Your help is appreciated in advance.  Thank you.

  Hello

  Contact the computer manufacturer and ask them to send you to xp recovery discs to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Gmail button (in internet explorer) keeps having moved to the right in my taskbar when I wasn't staying on the left (that's why I first open). How can I get the taskbar buttons to stop randomly to reorganize and stay in order?

  Gmail button (in internet explorer) keeps having moved to the right in my taskbar when I want to keep it on the left (that's why I first open).  How can I get the taskbar buttons to stop randomly to reorganize and stay in order?  I'm talking about the buttons on list of my open applications and documents in Windows Vista.  The bar tasks are "locked", but the button of the window open with gmail in internet explore reappears suddenly in the good moments apparently random.

  It is in the middle part of the taskbar (what I found online so far is on the start menu, the quick launch area or area/system tray of notification, the location of the taskbar in full, either about grouping taskbar - I disabled because I would like to separate).  Can anyone help?  I don't understand why this is happening (or why microsoft would never do).

  Lock the taskbar that it prevents to be moved elsewhere on the office and maintains the different sections where they are - it does not block the tabs showing what is open where they were when they were opened.  There is no control for this function.  Maybe if you uncheck similar taskbar buttons group it will help, but I honestly don't know (and fear he won't make any difference - it may even make things worse).  This also happens to me and I was unable to find an answer.  I think that there are more than just random, but I can't telll you why he moves the legs periodically (sometimes it works fine all day and other days it happens almost immediately).  But still, there is no control for this function, so there is no way to tell him to keep a specific order or to lock an established order, once it has been created.  I suspect that it happens because the notification area icons appear and hide and new programs open and close and which changes the amount of space available and so he rearranges things so that they match and apparently does not always consider the original sequence in which the elements have been added.  Maybe if you remove the Quick Launch toolbar and then add again, the order will reset (but that I know not - probably not in the original sequence, which I doubt is logged nowhere - it did not work when I tried it).

  Unfortunately, I don't have a solution to this problem (and I spend a little time looking for even before myselff posed the question) and do not believe that there is a.  It is also unfortunate that you can't move them so they can be put back in the right order if they change.  I don't think that there is nothing wrong with your system or that it is something that can be repaired or fixed - it's just the way it is and we just have to live with it.  I don't know any 3rd party software that controls the order of tabs open in the taskbar program (but you can check out Bing, Gooogle,www.tucows.comand www.download.com to see if I'm wrong on this - here n "t all when I looked trying to solve this problem for my own system).

  I'm sorry it wasn't what you wanted to hear, but it's like that.  I don't know if it's different in Windows 7.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get the taskbar to show when I want to use?

  In many programs, the taskbar disappears from the bottom of the screen.  Sometimes I need to use an icon that sits on the bar spots.  How can I get the taskbar to show when I want to use an icon on this subject?

  What are 'many programs' to make it happen?  If you are using "full screen", you must leave this mode, usually by pressing F11 or ESC key.

  Unless you are referring to a mode "full screen" programs...

  • The taskbar should appear if you move the mouse to the bottom of the screen.

  OR

  • Right-click on an empty part of the taskbar, and then select Properties
    Uncheck the box "auto-hide the taskbar."
    Click OK

• How can I get the old search wizard on windows vista/windows 7?

  Original title: bringing research research assistant, new bad engine

  Dear all.

  I like Windows XP search assistant as if worked as an engine of 'real' research, for example, bing, google and search keywords.
  The current one is too basic to windows vista and windows 7 is rubbish and doesn't like the old.

  How can I get the old search wizard on windows vista/windows 7?  If I can't do it, how I'd get that to happen?

  Your

  Tom2020

  HI Tom2020,

  If you want to leave comments about the research, please do so at:

  Windows 7 comments

• How can I get the tag icon to show in the photos

  How can I get the tag icon to show in the photos?

  Dee

  Try to move the zoom slider to the right to increase the size of the thumbnails.

• How can I get the thumbnail button to appear?

  The button thumbnail that is located on the left side of the reading pane is gone somehow.  I absolutely need to print specific pages, and I need to move pages from other pdf files, and delete useless pages.  How can I get the icon to show?

  You should be able with the right button of the area of navigation pane and select the Pages. If it appears as a floating window, click and drag the word "Pages" (as opposed to the bar at the top of the window) and drag it to the area of navigation pane to dock it.

• How can I get the NIC IP of a host?

  How can I get the IP address of a NETWORK adapter for the host.

  You are right. If you connect to ESX, you will always get NULL. You can use either COS IP IP of the kernel or both for display.

  If it is a hosted solution, your phyical WHAT NIC is controlled by the underlying operating system that assigns IP address.

  Steve JIN, VMware engineering

  Creator of VI Java API: http://vijava.sf.net

• How can I get the exact amount of the reminder for ActivityEvent.ACTIVITY Motion?

  camera.setMotionLevel (30,3000);

  camera.addEventListener (ActivityEvent.ACTIVITY, activityEventHandler);

  Inside activityEventHandler, how can I get the exact level of movement that raised the event?

  Hello

  You can get the level of activity by using the Camera.activityLevel property.