How can I get Vista like that?

Similar Questions

• How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).

  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.

  Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.

  Help.

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection.  It shows for the connection?  You
  should leave this setting not selected, in which case Windows Mail will use the IE connection uses.
   
  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.
   
  If everything which withdraws, but you still have the problem, the account may be damaged.  Remove account, restart Windows Mail,.
  then recreate the account.
   
  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------
   
  "W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *
   
  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
   
  They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.
  which none seems to allow me to select a LAN (ISP) simple (without a password).
   
  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging tool
  to see or use.
   
  Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listed
  above and to the exclusion of any direct connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I just
  cannot operate directly.
   
  Help.
   
   

  Gary van, Microsoft MVP (Mail)

• How can I get my screensaver that worked on windows xp to run on windows 7?

  Original title: How can I get my screensaver that worked on windows xp to run on windows 7 error: the version of this file is not compatible with the Windows version you are using. etc. I know that you saw the message before.

  computer brand new, no change. try to load my programs of hp simple save on my new computer.

  The msg is to tell you what is not compatible

  You can not copy/transfer a program from another PC

• error message received when downloading CC PS I needed to upgrade my display driver.  I've now updated - how can I get the improvements that have been disabled on initial installation?  I use Windows 7-64 bit.

  I received an error message telling me that my display driver was not at the height, & that some improvements would not be enabled.  I've since updated my display driver.  How can I get the improvements that have been initially disabled?

  Thank you...

  If you have all the features you need and there is no problem.  let alone ps.

• How can I get vista on my laptop?

  my laptop is not a hard disk and given that you have need of a drive for vista how can I get it

  Hello

  Given that it is a netbook with no disk drive, it would be better to check with the manufacturer of system for methods.
  They should have all the options you need if the upgrade can be done.

  I hope this helps.

• How can I get a driver that has been deleted

  I need how do I get a driver that has been deleted

  Hello

  go to the manufacturers website and download the driver again

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I do something like that? This border seems REALLY simple, but I have no idea?

  

  The thing with a yellow border. How can I do it like this? As there's just 'behind' the figure

  

  1. Add a layer blank and choose a foreground color.

  2. choose the Rectangle tool to draw the image. (mobile dotted)

  3 edit > race about 4 pixels (your call) location: inside

  4. uncheck the box mobile dotted

  4. Add a layer mask and with hard edged brush painting in the back to hide the frame

• How can I get the icon that allows me to zoom in a larger type at the bottom of all pages

  When I'm in firefox, my impression is so small that I can hardly see it... i have done all the things that I learned and I got my type of font I like, but for some reason, that I can not get the size to change to a larger size... until my computer crashed and I had to do everything everywhere, this icon was there... on some pages, at the top of the page , I think that under Tools (which isn't on all of my pages) will allow me to zoom in for a larger size but in firefox, it is not can not... someone hele me with that?

  This Firefox support page helps you:

  http://support.mozilla.org/en-US/kb/how-do-i-use-zoom ?

• How can I get the image that provides information on social media sites when I put my website on a position to be different from what it is

  If you put in my Web site addresses of customers on social media sites (like Facebook and Pintrest) image that filled is not the image we want. How do I change of these images so that's their logo or a linked picture.

  
  

  
  

  Hi there, you need to read (just google it) on the metatags for social media

  Google ' media meta tag social og "and you get several guides that explain what they are.

  You can then apply to your layouts depending on the module and use cases.

• I had 7 a window and a window Vista and I had a VM for XP, I was wondering how can I get Vista on A Virtual Machine.

  I got 7 a window and a window Vista and I had a VM for XP, I was wondering how I can get Vista on Virtual Machine has what I need, or what I do to make the ISO or. VIRTUAL HARD DRIVE. Help, please

  You will need to buy a copy of Windows Vista and install as a virtual machine.  There is no free download of Vista. Boulder computer Maven
  Most Microsoft Valuable Professional

• My pcdid not equipped with any disk but has a recovery partition. How can I get vista to reinstall

  can I burn the recoery CD?

  Read the General information below on the recovery of Partitions and recovery discs and contact the manufacturer of your computer.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I fix Vista so that I can download and install iTunes and Quicktime?

  I can't get updates for Vista either. Error messages when I try to do anything.

  Any other problem iTunes, contact Apple with their software:

  http://www.Apple.com/support/iTunes/

  See you soon.

  Mick Murphy - Microsoft partner

• How can I get vista logo is displayed at startup?

  For some reason, I see only the loading bar and no logo on it. How should I do?

  The 'logo' shows briefly (and this isn't the standard logo) after the loading of the process bar and the black screen that follows but before providing the option of login screen.  There is no way in Vista to control the operation of the system during this process (until the login screen appears and then that can be configured and even eliminated, if that is your wish).

  Here is a free software program 3rd party who claims to be able to show the Vista logo during the boot process (though I haven't tried myself): http://www.softpedia.com/get/Desktop-Enhancements/Shell-Replacements/Vista-Boot-Logo-Generator.shtml.

  Here's another free bootable image tool: http://download.cnet.com/Vista-BootScreen/3000-2105_4-10789924.html.

  I don't know when these images will be displayed during the boot process - so it may not be what you have in mind, but they are there for you to try.

  Given that they are 3rd third-party products to play with the boot process, I first create a point in http://www.howtogeek.com/howto/windows-vista/create-a-restore-point-for-windows-vistas-system-restore/ restoration system and the backup of the registry: http://www.adamsdvds.co.uk/tutorials/vista/regedit/backup.php just ot be on the safe side.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get Vista navigation pane to only work for a specific folder view?

  I am running Windows Vista classic folders. Significant irritation is that I want to have the navigation pane enabled for the _only_ in my computer/Windows Explorer folder. I don't want that it activated for other folders with groups of icons for programs.

  But I find that when I turn it on for the first folder, it becomes activated for all. On the other hand, if I turn it off for a program icon folder, it is disabled for all files, including the Windows Explorer.

  So, how to customize the navigation pane to make it work for a folder specific _only_?

  The other models are for music or photos or videos or Documents (and I can't remember the fifth).  They show the different columns and present different data sorted differently.  I don't think they will solve your problem.

  Some general information here is on models and how to set any records that might be of interest to you (but will not solve your problem, I think):

  Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get outlook so that it starts automatically

  People, I wonder if anyone can help me with this question. When I start my laptop and I'm running Windows 7 Ultimate, how get you 2013 Outlook starts automatically. Now when my desktop I have physically click on the Outlook icon so that it starts.  I heard there is a way to do this, however, at this moment I don't know how to do this. Your help is greatly appreciated. Best wishes & thank you very much, Mr. Renard Pongrac * address email is removed from the privacy *

  To get any program from starting automatically, first get a shortcut icon on the desktop. Then, Drag the icon to start. All programs. When the Start Menu grows, continue to drag it down to the startup folder and drop it in there. Reset.