Pavilion 15 n005TU: second monitor does not

Similar Questions

• HP Pavilion p6 2400 - 3rd monitor does not

  Hello

  Buy HP Pavilion p6 2400, core i5, GEFORCE graphics card. Windows 8.

  Bought 2 DVI adapters for 2 screens and 3rd screen using HDMI.

  HDMI and another screen works very well, but a black screen with ´no video feed´ happens. Also, windows does not recognize the third monitor.

  The guy in the computer store told me that was all that I needed...

  Any suggestions?

  Thank you very much!

  Magnus

  Here are the specifications of your desktop HP Pavilion p6-2400es. According to the specification, this model comes with a NVIDIA GeForce GT 620 graphics card and a 300 Watt power supply installed in the factory.

  

  (1) - HDMI (digital only) (2) - DVI - I (digital and analog)

  Maximum resolution:

  DVI (dual-link) resolution: 2560 x 1600 x 32bpp at 60 Hz

  HDMI resolution: 1920 x 1080 (1080 p)

  An analog VGA resolution (with adapter): 2048 x 1536 32bpp to 75 Hz x

  1 GB on-board memory

  Memory size: 64-bit

  Memory type: DDR3

  Blu - ray support

  Supports HDCP

  Supports up to two displays at the same time, in the following configurations:

  HDMI + DVI, HDMI + VGA

  You can run three screens provided you purchase displays a graphics card capable of supporting three or more simultaneous and a diet appropriate for the graphics card.

  or

  If you do mostly Office type stuff (spreadsheets, word documents, day trading, light video watch, etc.) on the computer... you can opt to purchase a USB-to-video adapter like the eVGA UV plus + UV39, or one of the many other similar cards on the market. (I have and know that the eVGA UV more + UV39 works as advertised, while many others have not).

  Please send Bravo

• HP ENVY17 700: Second monitor does not work

  I'm trying to set up a second monitor for my counter top. I have pluged in the vga slot _which for some reason any has a lid screwed on it_ and it works with my computer. It did not work when I turned it on. If anyone can offer a solution asto why this has happened, I'd be happy. Tyler

  Hello

  What is the product/model of your Envy 700 PC series? The VGA port is covered because it won't work because of your machine a DIFFERENT video card. We need to know the product/model of your machine to see what the OTHER video card.

  Kind regards.

• second monitor does not... Help, please!

  Hello

  Computer: HP Compaq

  Model: CQ2700ED

  Windows 7 Home Premium 7SP1

  I hooked a second monitor (Samsung with VGA connector) DVI-d port.

  I use an adapter from dvi/VGA

  When I turn on the second monitor, he says: "check signal cable".

  In Control Panel / video, he did not see the second monitor.

  What could be wrong?

  Best,

  Rob

  Here are the specifications of your desktop Compaq CQ2700ED. According to the specification, this model has a DVI - D output (digital only) and a VGA (analog only) output as shown below.

  

  (2) - port VGA port DVI - D (3)-

  There is no liability "adapter" that can be purchased which allows to convert a digital signal to analog. The only way that you will be able to use two monitors with this computer in its current configuration is using a monitor with VGA input and a monitor with DVI - D input.

  Please provide the number of brand and model of both monitors you are trying to connect to your computer. This will allow us to determine options that you have with your existing monitors.

  Please send Bravo

• Application that was open on the second monitor does not open on the main screen without the second monitor attached

  At my office, I have a second monitor. One of my apps has been posted on this subject. I think I left the application; disconnected the monitor; and stop Windows XP.

  Now, my application wants to open on the second monitor which is not present.

  Is it possible to open the laptop monitor? Charles Allen Managing Consultant BKD Technologies

  Start the application, right click of its mosaic in the taskbar and click move .  Use the arrow keys to move to the first monitor, and then press enter .

• My second monitor does not display anything

  My computer worked fine and both of my monitors worked until recently when my second monitor stopped show all. My computer is always picking up as connected and on but the screen is black and no backlight, my monitor is not working is a hp w1907 and light on the upper part is the color it is on and not asleep. When I turn off my monitor and turn it back on it displays for the new school year second but then just a few no display. And before that I did my second monitor was my main monitor and it worked fine. I tried to make sure that the plugs are connected and tight and that everything was normal with the pilots and the son and everything worked. I have a Sapphire hd graphics card 7970 and plugs all work. Please help me solve this problem.

  Sincerely, McKane

  I tried the monitor in the other port and it still doesn't work so I decided that my monitor is dead and I cand do anything to fix it

  Then, almost certainly, the problem is that the monitor is dead. Especially if it used to work, it is unlikely that ther'e a driver problem.

  You might want to try the monitor to a friend's computer to verify that it is their work.

• PP 2015.3 Second monitor does not work and preferences locked

  Just upgraded to 2015.3 and open that I work on the current project. My second monitor has completely stopped playing after years of work. The second monitor shows only the extension of my office. Note that I did not any changes to my machine at the level of the OS x I thought on the upgrade, some preferences might have been reset.

  I went into preferences and that no monitor has been checked for video playback. I moved and my second monitor is TICKING as video playback to solve the problem. When I hit OK, nothing happens. The preferences windows remains open. It is never closed. It's as if the program refuses to accept all the changes I want to make. The only way to exit preferences window is to hit Cancel who reverts my changes.

  Any help is appreciated.

  Just found the solution to your preferences is not not qualify: it is possible that your user account is not authorized to change the Preferences folder. (No idea how this occurs, mine was going well until I updated to CC2015.3)

  Follow the steps under the '' alternative Solution '' to this link and see if it works.

  Adobe first Pro CC, Adobe Media Encoder CC, CC prelude Adobe crash | Mac OS

• Remote Desktop on pc with 2 monitors, programs previously open on the second monitor does not show

  Using remote connection to a system with two monitors

  At work, I have a Windows XP Pro SP3 system with two screens.  Sometimes, I work from home using my PC at home to connect to the network through a VPN and logging remotely and then in my work computer.  When I launch a program that last turned on my secondary screen to work, it is not visible at home because the remote access connection supports only one (primary) view.  The same thing happens with pop-up in applications, for example a search window.  If the last time I used search in Word, I moved the contextual search to the secondary display window, so I can't see the search engine remote access connection using from home.  Some of these pop-up windows have no menu on them to minimize, maximize, move, and close so there is (apparently) no shortcut to open this menu

  If a tab of the window appears in the taskbar at the bottom of the Windows desktop, I can right click on it and a popup menu will appear. I then click on move, then left click of the mouse and start dragging until the window off the screen starts to appear on my primary display.  However some windows have no popups menus when I right click on their tab taskbar so I can't select move.  Others have no tab that appears for them in the taskbar.

  Is it possible to move such a window to my primary remote access connection screen without being able to see it?

  If not, is there a way to move my work computer to screen single operation of the House using to access remote connection so that all windows appear on the main display?

  Thank you!

  Don't know if it will work, but it's worth a try...

  Try a right-click in an open in the tray area and then select the "Cascade Windows" option in the context menu.

  You can also try to move by pressing Alt-space on the keyboard and then the key M. is the equivalent of a "move".  Then use the left or right arrow key to move the window in the view.

  HTH,
  JW

• Tecra M5 - Second monitor does not display anything

  Hello

  I was wondering if you could help me.

  I am running windows 7 and I am trying to connect a Second display for my Tecra M5 laptop but for some reason, it detects but it won't show anything.

  What can I do?

  Can you please tell us which model of laptop do you have, what port and cable you are using and is Win7 original version of the operating system that you got with your laptop?

• Why is my second screen does not work - it starts with my main screen, but then turns off.

  My HP Pavilion P7-1120 Desktop PC does not work with two screens - there 8gig of ram...  1.5 terabyt hard drive, Windows 7 64-bit primary system works via the VGA port, but the second screen does not rest via the DVI port.  The two normal startup with the start-up of information on both screens, then the secondary display stops and I get a message "no signal".  Both monitors worked with my laptop PC and older myDell...

  When I go into the control panel and the view tab - the PC does not recognize the second monitor.

  GEO...

  It's not a problem with my PC or whatever it is in the box.  Cables work on other screens of the RGA and DVI.  There is a problem with my screen - the works of port RGA, is not the DVI port.  Another monitor works properly by the DVI.

  Now fixed.

  TKS for the entry.

  GEO...

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• F1503 - led blue monitor does not power available. Unable to turn

  Hello

  I had my f1503 monitor into storage for a while and it finally worked its use. Properly connected all power and PC connections and changed the tension but no blue led light work and impossible to turn on the monitor. Checked the power adapter - green led on the power and 12,33 volts transformer showed at the end of the output of the power supply monitor.  The monitor plug was inserted into the grip. Help, please?

  That the monitor has a fuse that needs to be replaced?

  Hello Bruce123456,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems when your flat screen HP Pavilion f1503 monitor does not come. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• WUSB54GC - WLAN monitor does not not on Windows 2000 SP4 computer laptop

  I have a WUSB54GC v3 and I tried to install the drivers and the WIFI monitor on a Gateway Solo 5300 laptop running Windows 2000 SP4.  When I put the disc, the installation automatically started, but stopped after a few seconds with a pop message saying, "this version of windows is not supported" (or something similar to that).  I read in this forum and learned how to manually install the driver from the disk I did.  I checked the device using troubleshooting in Device Manager and shows the driver to be installed correctly and the device works correctly.

  My big problem is that the monitor WLAN (the little green square in the bottom right of the screen) will not illuminate.  There are no available wireless networks and the monitor does not respond to the "Refresh" or anything else.  It seems to be "dead".  How can I get the monitor to work?

  Thank you!

  Mike

  WUSB54GC is not compatible with Window2000... So either you can upgrade your operating system to Windows XP, or you can go for different cards as WUSB54G.