How can I identify the date when the last system restore was used to roll back the pc?

Similar Questions

• Qosmio G20: How can I identify the DVD Recovery CD?

  I work in a society where more is Toshiba Laptops. Unfortunately, all DVD-recovery are in the same place, and I don't know how can I identify the one for my laptop.

  I have a Qosmio G20.
  Any ideas?
  Thanks in advance!

  Hello

  > I don't know how can I identify the one for my laptop
  Each original Toshiba Recovery CD is labeled.
  There is a number and the model of laptop that is supported.

  You can compare the number on the CD with the number at the bottom of the laptop.

  All that s

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

• How can I identify the version of the operating system preinstalled?

  Hello

  Sorry for the stupid question, how can I identify my girlfriends preinstalled the operating system?

  Hello

  Start - Control Panel of configuration-system and safety - system, where you can see installed Os version

• How can I identify the photo albums are assigned to in Photos.

  When I look at a picture in the stack of Photos or any album, I would like to be able to identify the albums that he has been assigned.  Does anyone know how to do?  Please understand that I know how to use a smart album to find unassigned photos, but how get you assigned to the photo albums?

  And explanation as to why: this is a very important tool for me to remain consistent in 'depot' photos on and be able to verify that they are filed correctly.  And it might be a surprise to Apple, but I don't think in terms of date/time/gps when using my pictures program.  Those are some boundaries meaningless for me, even though they may be useful for school of information indicators in the metadata.  Over the years, many photos were always is received by mail or scanned and do not have a suitable spot attached date or gps.   Faces is useful, but look at a 5 k photos of 'mother' without knowing what album they are, is not useful.

  Please understand that I know how to use a smart album to find unassigned photos, but how get you assigned to the photo albums?

  Photos does not support this. You can't get a list of standards albums to that picture has been assigned.

  If you ask for a photo, albums photo is in it, only use smart albums based on keywords. You can see the keywords in the Info Panel for a photo and how directly, including smart albums it will contain.

  To find all the albums of standards in that photo is you will want to program an Apple Script.

• How can I identify the answering machine to my question if I can credit?

  I need identify the provider who responds to my questions in order to be able to properly thank them and possibly to continue the topic more in depth.

  When you receive a message that answers your question, mark it as the answer. Then just reply to this specific post and you can thank them here.

• How can we identify the code that triggered the promotion discount in order?

  Hello

  As we can create coupons and promotions assign them to give discounts. How can we identity coupon code that is added to the promotion which caused the discount in order?

  Kind regards

  Chede

  I give you an example. Here's how you do it from the order level promotions. OrderImpl (object) (API below give you orderpirceinfo and second link gives adjustments.)

  http://docs.Oracle.com/CD/E35319_01/platform.10-2/APIDoc/ATG/commerce/order/OrderImpl.html#getPriceInfo )

  OrderPriceInfo that extends AmountInfo, the following method gives adjustments

  http://docs.Oracle.com/CD/E35319_01/platform.10-2/APIDoc/ATG/Commerce/pricing/AmountInfo.html#getAdjustments )

  Now browse adjustments, for pricingmodel (i.e. promotion) and coupon applied on order

  PricingAdjustment (ATG Java API)

  PricingAdjustment (ATG Java API)

  Hope that gives you an idea where to start.

  -Kiss

• How can I identify the original cartridge? What is the warranty on the new cartridge?

  Dear Sir.

  I buy a new cartridge No. 21 last month. now it does not. Please tell me where it will replace in haryana.

  I am including a link which explain the Hp warranty on its ink below.  I am also including a link that will help you identify the genuine Hp ink cartridges.

  HP warranty

  Authentic Hp inks

• How can I fix what's wrong with my system restore when it is 'failed' to restore of any "Restore Points?

  Well, what is said.  I see all kinds of "restore points", highlighted in the restore calendar page.  But any day or I choose to restore point, the result is the same.  "Unsuccessful system restore" computer is returned to the...  (I don't know how they phrase it exactly, but the key is exactly the way it was when I started with optimism the restore process.)

  What is your system brand and model?
  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.

• How can I identify the corresponding lines when lead and trolling can be used for several similar values in their?

  I use:

  Oracle SQL Developer (3.0.04) build hand - 04.34 Oracle Database 11 g Enterprise Edition 11.2.0.1.0 - 64 bit Production

  
  

  Examples of data
  

  Table
  

  with t as)

  Select to_date('8-18-2013','mm-dd-yyyy') dt, "123_' ticket_origin, ticket_destination '123', startid 101, 101 origin, destination 0, 'origin' objecttype, amount 85, 100 area union double all the

  Select to_date('8-18-2013','mm-dd-yyyy'), 123', '123_", 0, 101, 103, 'destination', 85, 100 of all the double union

  Select to_date('8-18-2013','mm-dd-yyyy'), 123', '123_", 103, 0, 0, 'destination', 85, 100 of all the double union

  Select to_date('8-17-2013','mm-dd-yyyy'), 124. _', ' 124. ', 105, 105, 0, 'origin', 150, 200 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), 124. _', ' 124. ', 105, 106, 0, 'origin', 150, 200 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '124.', 124. _', 0, 0, 106, 'destination', 150, 300 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '124.', 124. _', 105, 0, 106, 'destination', 150, 300 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '127_', '127', 108, 108, 0, 'origin', 50, 600 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '127', '127_', 0, 0, 110, 'destination', 50, 600 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '127', '127_', 0, 0, 110, 'destination', 75, 600 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), 125. ' _', ' 125 '., 108, 108, 0, 'origin', 60, 800 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), 125. ' _', ' 125 '., 108, 112, 0, 'origin', 60, 800 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), ' 125. ', '125', 108, 108, 0, 'origin', 60, 800 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), ' 125. ', '125', 109, 108, 0, 'origin', 60, 800 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), ' 125. ', 125. _', 0, 0, 112, 'destination', 60, 700 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), ' 125. ', 125. _', 108, 0, 112, 'destination', 60, 700 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '125', ' 125. ', 0, 0, 109, 'destination', 60, 900 from all the double union

  Select to_date('8-17-2013','mm-dd-yyyy'), '125', ' 125'., 108, 0, 109, 'destination', 60, 900 double

  )

  Is there a way to check date of consolidation for correspondence ticket_origin and ticket_destination when there are two or more lines of difference between them, which does not allow me to use result delay or function. It is also possible do it without using the amount column?

  I also want to identify if they are in the same region, when it is associated with (that I believe works after getting sorted table like so below then use lead lag after having de facto order)

  I'm trying to get something like this table

  with results like)

  Select to_date('8-18-2013','mm-dd-yyyy') dt, "123_' ticket_origin, ticket_destination '123', startid 101, 101 origin, destination 0, 'origin' objecttype, amount 85, 100 area union double all the

  Select to_date('8-18-2013','mm-dd-yyyy'), 123', '123_", 103, 0, 0, 'destination', 85, 100 of all the double union

  Select to_date('8-17-2013','mm-dd-yyyy'), 124. _', ' 124. ', 105, 105, 0, 'origin', 150, 200 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '124.', 124. _', 105, 0, 106, 'destination', 150, 300 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '127_', '127', 108, 108, 0, 'origin', 50, 600 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '127', '127_', 0, 0, 110, 'destination', 50, 600 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), 125. ' _', ' 125 '., 108, 108, 0, 'origin', 60, 800 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), ' 125. ', 125. _', 0, 0, 112, 'destination', 60, 800 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), ' 125. ', '125', 108, 108, 0, 'origin', 60, 700 Union double all the

  Select to_date('8-17-2013','mm-dd-yyyy'), '125', ' 125. ', 0, 0, 109, 'destination', 60, 900 double

  )

  You need to research rules business more to clarify and apply the mapping one.  The main secret is probably to match the values of ticket.

  Under use a t_view of view with the addition of PK (RID) to the table.  Some discrepancy could be solved by adding more rules for mapping and correcting the expected result entry errors

  SQL > desc t_view

  Name

  ------------------------

  RID

  DT

  TICKET_ORIGIN

  TICKET_DESTINATION

  STARTID

  ORIGIN

  DESTINATION

  OBJECTTYPE

  AMOUNT

  AREA

  with

  T1 as (select * from t_view where OBJECTTYPE = 'origin'),

  T2 as (select * from t_view where OBJECTTYPE = 'destination').

  map as (t1.rid select origin_id, t2.rid from t1 DESTINATION_id, t2)

  where t1. TICKET_ORIGIN = t2. TICKET_DESTINATION

  and t1. TICKET_DESTINATION = t2. TICKET_ORIGIN

  -Add rules to apply the one-to-one mapping

  and t1.amount = t2.amount

  and t1. STARTID = t1. ORIGIN

  and t2. STARTID = t2. ORIGIN),

  like map2)

  Select origin_id gid, origin_id rid of card

  Union of all the

  Select origin_id gid, DESTINATION_id rid of card)

  Select t_view.* card2, t_view where map2.rid = t_view.rid

  order of map2.gid, map2.rid

  /

  GET RID OF THE DT

  TICKE TICKE

  STARTID

  ORIGIN DESTINATION OBJECTTYPE

  AMOUNT

  AREA

  ---------- --------- ----- ----- ---------- ---------- ----------- ----------- ---------- ----------

  	1 18 AUGUST 13 123_ 123	101	101	0 origin	85	100
  	3 18 AUGUST 13 123 123_	0	0	destination of 103	85	100
  	4 17 AUGUST 13 124. _ 124.	105	105	0 origin	150	200
  	6-17 AUGUST 13 124.  124 _	0	0	destination of 106	150	300
  	8 17 AUGUST 13 127_ 127	108	108	0 origin	50	600
  	AUGUST 9-17 13 127 127_	0	0	destination of 110	50	600
  	11-17 AUGUST 13 125. _ 125.	108	108	0 origin	60	800
  	15-17 AUGUST 13 125.  125 _	0	0	destination of 112	60	700
  	13-17 AUGUST 13 125.  125	108	108	0 origin	60	800
  	17 17 AUGUST 13 125 125.	0	0	destination of 109	60	900

  10 selected lines.

• How can I identify the PPC-based programs?

  I am running Snow Leopard. (10.6.8) because I used depends on the PPC software. Upgrade to any newer OS would make this software unusable (I found to my dismay when I updated to Lion mountain a few years ago and had to roll all back.) I can now be able to release these programs, but I would like to know which ones is unusable before that. Is it possible to inspect the application software to know which ones I'm going to lose if I update?

  Choose about this Mac from the Apple menu, click details, and check the System Profiler.

  (136916)

• How can I identify the correct wireless and ethernet on my computer card hp pavilion dv7-6b32us laptop?

  No software is identify them correctly and I can't not all drivers on the support page to work.

  Hello:

  These drivers are for Windows 7 64 bit Home Premium OS that is installed on your PC:

  First install the Intel chipset driver and reboot:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100315-1&CC=US&DLC=en&LC=en&os=4063&Product=5189524&sw_lang=

  You have the Broadcom WLAN 4313.

  It is the latest version of the driver for him:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-100089-1&mode=5

  The second is your Realtek card reader driver

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100221-1&CC=US&DLC=en&LC=en&os=4063&Product=5189524&sw_lang=

  The next one is the driver of your IMEI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100239-1&CC=US&DLC=en&LC=en&os=4063&Product=5189524&sw_lang=

  Then is your USB 3.0 controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-99763-1&CC=US&DLC=en&LC=en&os=4063&Product=5189524&sw_lang=

  The first unknown device is your fingerprint sensor.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100260-1&CC=US&DLC=en&LC=en&os=4063&Product=5189524&sw_lang=

  The second, in my view, is your HARD drive protection sensor: there is no driver for this on the support page, so try this one.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76187-1&cc=us&DLC=en&LC=en

  In addition, if you use the shortcut keys on your laptop, you must also install the quick launch buttons.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100465-1&CC=US&DLC=en&LC=en&os=4063&Product=5189524&sw_lang=

  Paul

• How can I identify the program that turns my internet access?

  Normal mode startup I get an IP address from my router but no internet access, cannot ping the router IP address or IP address of another computer on the local network.  I ping my own IP address.  I can access the internet if I start my computer in Safe Boot w/Internet.  I'm guessing that a program is power off or blocking the ability of network cards to talk beyond my computer during startup.  There are system variables, I can look at, or a list of programs that need to run, so that I can turn off others and test to see if the network works? This problem affects both my Wi-wired connections and my computer.  They both Act the same way.  I even installed a second adapter USB wireless as a test and it also reaches the router initially and then won't talk to her after the security negotiation.  McAffee software detects no virus on the system and no virus found or deleted in the previous analysis of the reports.  The problems started when I rebooted my machine to get the sound to work.   I had been running without the speakers connected and found the sound does not when I plugged.   The only known software update was of Flash Player, but I see no way out with a restore point, which is days of May and was generated from a Windows Update.  Everything worked fine after that Windows Update including the speakers.   I need help, or will be forced to recreate the image on my machine, I want to avoid.

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Satellite Pro A120: How can I identify the disk - bar codes?

  I had my hard drive stolen at work with all the things my company on... The person was taken, but the police want to show me its mine, everyone in my office has the same confidential files.

  My question is: among the labels of codes bars on my hard drive... is one that would connect to my computer?
  Or is there something that can be sound from my computer?

  The computer is a satellite pro A120

  Thanks in advance

  Hello

  I'm no expert, but I think that something like that does not exist. HARD drive is the product of mass and also one Extensible parts on every laptop.

  I must say that the previous user has the right idea. If you use the password to protect your operating system, it may be the best evidence for you.

• How can I identify the number of questions in qcproject at the beginning of the project?

  I need to read the questions in a project and uses this value to control a custom navigation bar, however the value of 'cpQuizInfoTotalQuestionsPerProject' is set only once the first quiz slide entered. I need to know at the beginning of a project. How is that possible?

  Thank you

  Gary

  Try to extend the scope of trivia game to the first slide by placing a button marked on this slide, which is the quiz.