How can I measure the bandwidth? My internet has a top hat.

Similar Questions

• How can I measure the output of a sensor pwm ultrasound using the module or 9403

  How can I measure the output of a sensor pwm ultrasound using the module or 9403

  Khalil,

  When you say 'measure' the PWM signal, exactly what to tell you?

  You're looking to measure the frequency or cycle of the signal function? You count the edges of the PWM output increase? Looking to control the waveform?

  With reconfigurable FPGA hardware, it is up to the user to define the function of the physical i/o on the FPGA chip. By connecting the signals as Adam suggests your digital pulse will be brought to the cRIO. In your FPGA program, you define the function. You can set a base counter or transfer digital data from single point to welcome you cRIO for floating-point more complex treatment. Example FPGA programs are located in the http://www.ni.com/IPnet.

  Hope this helps, please post any additional questions.

• How can I measure the Max delay

  Hi guys,.

  I'm trying to add the module to the pulse to my VI. To do this, I guess I need to measure delay Max.

  In my class VI, I have some instruments of the current driver, LED, spectrometer, camera and temperature controller. In addition, current is the variable I can change all the time during the execution of the VI.

  I was wondering how can I measure the delay between the one and the other, and when I change the value of the current, how long will take to capture the right data

  I knew that the number of cycles to measure VI all the time but how can I do for several parts

  Thank you

  Time required for the execution of some code can be done using 'Tick counts' now if you do not want it for full code but you want for specific elements of the code, then you must use the same function (i.e. "Tick count" separately for each section of the code.

  

• How can I measure the length of the lines written with the Paint program?

  I know that an earlier version of the painting software was able to measure the length of the lines written with the Paint program.   I don't know what version it was.   I have the Windows 7 Home Premium Version 6/1 (Build 7601 Service Pack 1, Copywright@2009.  How can I measure the length of the lines that I have the project using paint software?   Do I need to get the previous version?   How can I get?   PLEASE ANSWER!

  Hi Ralph,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. What is the name of the paint program?

  2 have you tried to install the software of paint in Windows 7?

  3. are you able to install it? If this is not the case, do you have an error code or message?

  4. in what version of Windows was fine paint software work?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• How can I remove the Dropinsavings coupons that cuts down, top right of my screen?

  dropinsavings

  How can I remove the Dropinsavings coupons that cuts down, top right of my screen?

  Hello, Rick,

  Have you installed dropinsavings coupon toolbar?

  Open Control Panel > uninstall programs and search for additional toolbars.

  Try to opt out the savings Drop - it will be possible to uninstall the toolbar

  http://www.dropinsavings.com/optout.php

  If you want to keep,

  Start > Type msconfig

  Click on the Startup tab

  Look for the list dropinsavings

  Uncheck all ads by dropinsavings

  Click on apply, Ok

  Restart the computer for changes to take effect.  You should not see the offers fall after that.

  Don't forget to check the "do not display this message" restart now or the screen utility horse msconfig will appear at each reboot.

• Push Notifications / how can I measure the results?

  Hello

  I have send notifications of text every week for my magazine. How can I know the number of users who have launched the application through the notification? I need a third party? If so, any recommendations?

  Thank you!

  Do us the same thing and follow push them on Omniture. You must have an analytical account and make sure that the application is linked and has its own dashboard.

• How can I measure the variable tension with the DMM and switch?

  Hello, engineer,

  I am a student, I want to measure the varying tensions from V to Via. I have the following equipment: SMU-1065 PXI-4065 PXI-2529. I use the PXI-8360 and PXI-8361 to connect with my PC. I hope I can do that when I have the next blood I should click with the mouse and connect the right position to the object of measurement.

  How can I achieve that?

  Any suggestions with great satisfaction.

  Since I know a little English, if I did not explain my question clearly, please ask me.

  Best wishes.

  Kind regards.

  chuanyuehuoxian

  Yes, you can.

  You can set the samples when using DMM.

  You can also refer to the example in LabVIEW.

  THX!

• How can I measure the time between the two edges of successive increase, using digital input...

  Hello

  I'm trying to measure the time in seconds between each two successive rising edges on a digital input.

  So far I managed to detect the rising edge, increment a counter at each rising edge and take the time during which the increase is edge

  all I need now is subtract edge currently rising from the previous era of edge rising to calculate (T), which can be 1/frequency and display in real time for the user.

  but I do not know how to do this

  Can someone help me please!

  Note: while I am in a position varies between 200 ms - 2 seconds

  
  

• How can I measure the time between each two successive increase edges, using digital input?

  Hello

  I have tried two measure the time in seconds between each two successive rising edges on a digital input.

  So far I managed to detect the rising edge, increment a counter at each rising edge and take the time during which the increase is edge

  all I need now is subtract edge currently rising from the previous era of edge rising to calculate (T), which can be 1/frequency and display in real time for the user.

  but I do not know how to do this

  Can someone help me please!

  Woah!

  Sorry Apok, but your code becomes much too complicated and salty. I don't think that all records to offset or Boolean conversion/operators are necessary at all.

  If you want to measure the time between two keys so it's another (much less complicated) way. It simply records the time when press button in a registry change, then compares the two.

• How can I limit the bandwidth for endpoint on the router from 1921 to mitigate impacts traffic bittorrent reviews?

  We have implemented an independent network for our wireless comments. It's an ADSL modem, enter a 1921 Cisco. I setup NAT and DHCP on the router and it is only accessible through the wireless connection. We have a connection 50Mbps and about 250 devices connected to it. Some of them use bittorrent and other file-sharing software to quickly eat bandwidth.

  Since the torrent software is adjustable to any port and cannot be blocked like this, I was wondering if there is a way to limit the bandwidth available to each device connection mitigate this.

  I put this in the Group WAN because it seemed appropriate as it performs the external connection. I know that the argument could be made for LAN, because it connects only within the corporate building and not to one of our service centers.

  Any help would be appreciated.

  Hi John,.

  I don't see anything wrong to apply a basic qos strategy, rank traffic using nbar to match with the bittorrent Protocol and other similar protocols. And then just Butterfly traffic down using a map policy.

  HTH

  Mike

• How can I find the last selection OR has highlighted it selection?

  When I select some elements in indesign I have the option of 'command + click' to highlight one selections. How can I find this item highlighted in the script?

  OR

  How I'll get the last item selected in indesign.

  
  

  I'm writing a script that relies on certain properties of the element highlight or the last selected item.

  
  

  Thank you

  
  

  
  

  Thank you myDavey. It's not exactly what I was looking for, but he had good information on something else, I'm trying.

  I found the solution to my problem. This highlighted selection apparently called the object 'key '.

  And it can be used in the script as app.selectionKeyObject. This solves what I was looking for.

  And you can find the last selection by selecting the last item in the selection table.

• How can we use the App generator DPS has a version of Windows of CS 6 Standard Edition?

  I bought Adobe CS6 standard package for Windows. I would use the Adobe Digital Publishing Suite to create an application. However, the application builder is available for Mac OS only. However, according to Adobe, there is an online version of the Digital Publishing Suite offering the Builder app for Windows. When I register, what I see is just a feature called "DPS for Mac app Builder" and it is disabled.

  How can we make use of the Adobe Digital Publishing builder Suite App has a version of Windows in CS6 Standard Edition?

  Transferred to DPS forum.

  The online app generator is not for iOS apps. There is no way around this restriction for iOS. You must use a Mac to create the application, although the content itself can be created under Windows.

• How can I measure the voltage of a signal?

  Well!

  I'm trying to read the voltage of a signal using acquisition data PCI-6229 card.i am giving the signal as an input to the DAQ card and try to read the voltage level. The range of my signal is 4.8 ~ 5.5 VDC but the results are not accurate, such as measured with DMM. My code is as follows:

  1.i m using DAQmx create channel to create an analog input channel

  2. then a sample clock with finite samples, sampels by channel and set the rate of iteratively

  3. then I start the task

  4. analog playback 1 DBL AK1 N sample d

  Pressure readings I am differs widely that the actual.e.g a signal measured with DMM is 5v but when applied to the DAQ hardware and measured gives 6v.also I have to define minimum values and maximum in VI... If I put 4 to 5 maximum and minimum to measure a 5vDC signal it gives good result. , but if I change the maximum setting to 6v then it gives me results.also bad behavior is different for different signals for example when I measure a 6.5 VDC to signal that it shows me the voltage as 7.3V...

  Photo of my code of VI is attached... Please answer... or give me another code that works fine at the voltage of a signal reading.

  
  

• How can I measure the continuous component of the tension a SMU-4496 with LabView

  Hello

  I use an SMU-1073 NI with an SMU-4496 for several applications. In one of them, I would need the blood, maintain the continuous component (this is an accelemeter of MEMS). It's standing vertical, it gives, for example, + 2V and I need to keep reading this almost constant value.

  However, with the DAQ Assistant in LabView, it seems that it only reads the component changing signal, as is it doesn´t to move, it reads almost 0. If it moves, the, the DAQ system takes the change but then returns to zero.

  Is this normal? Read the constant part of the signal?

  (I'm a mechanical engineer and I'm not at all an expert in acquisition of signals or data, so probably just something basic is missing me)

  I have attached an example in which, after a change, it goes back to zero and the configuration in the DAQ assistant

  Thank you

  AC coupling is the culprit-it allows to block all components of steady state DC.

  -AK2DM

• How can I fix the following error; iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.

  AppName: itunes.exe AppVer: 10.5.2.11 ModName: ntdll.dll

  ModVer: 5.1.2600.6055 Offset: 0000120e

  Hello

  What version of the Windows operating system is installed on your computer?

  It seems to be a problem with iTunes, some system files in iTunes is missing. I suggest you try to uninstall and reinstall iTunes and check if it helps.

  Step 1:

  Uninstall a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Step 2:

  Install a program: http://windows.microsoft.com/en-US/windows7/Install-a-program

  If the methods mentioned above do not help, then it would be best to contact Apple iTunes to get help.

  Get the apple customer service: http://www.apple.com/support/itunes/

  Hope the information is useful.