How can I prevent images or anything else of pinning to my icon in the task bar of Mozilla

Similar Questions

• How can I detect a trigger missed (i.e. 2nd trigger arrives before the task completes)

  Is it possible to know if a trigger pulse has been failed, because the device is busy?

  To give a specific example:

  I use a NI4462 Board with digital triggers of falling on the PFI0 entry point.

  I have an external clock, exactly the 1 kHz square wave.

  On each falling edge of the clock, I (re) start a task than 200 times, samples (200 kHz).

  Normally, it works well (as long as I take care to keep the task, stop and start the task in a tight loop and not make too much treatment in 5 ms, which remains after the last sample).

  BUT, if something went wrong (think of the external clock running too fast 1%), the 2nd trigger would happen during the running task (say, on the sample of 198).

  The NI4462 (I think) simply ignore this trigger, because the task is still running, and I would miss out on a framework for data set, getting only the 1st and 3rd groups of 200,

  Is it possible to detect when this has happened and raise at least one error?

  Thanks for your help.

  P.S. I also worry about the 63-sample-delay filter: is there a better solution than post processing to cut the beginning of a group and on the end of the previous 63 samples? This works well, but it incorporates a timing glitch after the 63rd sample.

  Hello

  I can't imagine a way to solve this problem in your task to the DAQmx. This should be relatively simple in FPGA or maybe even in real time. I'll come if I invent something.

  You could check your trigger with a counter clock (just carry your meter with your signal of 1 kHz) and throws an error if it derives.

  Perhaps I could ask a little more of the context of this question - why do you need this architecture? I don't know why you cannot acquire just streaming samples - this can lead us to a different solution!

  I will mention that your schedules are very tight, as this 5 spare part is at best because I don't think that your sample clock is synchronized with the clock of your relaxation.

  In response to your question about the delay, can preload you the filter before your main acquisition to lose the delay?

  A bit like the solution described in this KB (http://digital.ni.com/public.nsf/allkb/F989B25FF6CA55C386256CD20056E27D?OpenDocument), of course you would have to set up your triggers properly. A trigger of reference might use with a size of pre-triggersample of 63.

  I hope this is a help - let me know how you go.

  Best regards

• How can I prevent users from access to my hard drive from backup to the enclosed address?

  I have a HD attached used only for backup. When I change the guest user attached the HD content is accessible. I tried to change the permissions for the disk 'all', using the information, 'no access' window (without blocking) that seemed to make the case, but a quick search gave terrible warnings about changing permissions, so I came back to the unsatisfactory "read only". Change return 'each' to 'No access' would be a bad move.  If so what can restrict the guest access to the HD (besides of course the disconnection of the latter!) attached.

  You can encrypt the back upward, then it will be password protected.

  http://osxdaily.com/2012/09/17/how-to-encrypt-an-external-drive-quickly-in-Mac-o s-x.

• How can I stop firefox from automatically suggest popular searches when I type in the url bar?

  When I start typing in the url for that bar he used to AutoComplete my most used address. Now, the first thing it comes up with is a list of popular searches. for example, I type "tw" and he used to AutoComplete to "twitch.tv" now the first thing that comes up is twitter. How stop these search suggestions and return to the AutoComplete method?

  I should mention that this only started happening with the latest update of Firefox. It seems that this would not likely to solve the problem and that it is quite dramatic in a first time...

• How to access my hp webcam? The icon in the task bar has been removed and I can not locate the program

  I have a hp Pavilion g6 - 1 d 60 US notebook, formerly running windows 7 Home Premium 32/64 bit operating system. I'm now using Windows 32-bit Ultimate edition of the operating system.

  Hello

  If you are not able to uninstall Skype in the usual manner of programs and features (Control Panel), you can try an uninstall program of third parties such as detailed below.

  Download and install the free version of Revo Uninstaller from the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Run revo and use it to uninstall Skype. Right-click on the program icon and select uninstall - it will try initially to lauch that Skypes own routine that may fail if some files have been deleted, but simply continue the uninstall process. During the rest of the procedure, that you may be asked to remove the registry entries, simply select all and then click on remove. Do the same for all the remnants of files and folders. Once uninstallation is completed, restart the laptop.

  When windows has fully charged, try to reinstall Cyberlink YouCam.

  Kind regards

  DP - K

• I started to lose the speaker icon in the task bar sometimes, then completely, now I have no audio device listed and no sound on speakers. How can I get that back?

  I use XP Professional

  Hello Yaldingman,

  Thank you for your message.  We will ensure that you have the updated driver for your computer.
  Go to the Web site of the manufacturer of your computer and download/install the latest audio driver for your system.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How stop list tabs when I move the mouse over the icon in the task bar of Firefox?

  After the upgrade to FF6.01 and play a little with the new groups tab feature, now whenever I have pass the mouse on taskbar icon, all tabs are presented separately. I would go back to show only one tab open the Firefox browser.

  In the Firefox options and the tabs Panel, see if you see the tab found in the Windows taskbar archived.

• How to find the internet icon on the task bar, we had it and now his party

  On my Inspiron 1525 the icon in my taskbar indicating if you are connected to the internet has disappeared. It is connected but

  On my Inspiron 1525 the icon in my taskbar indicating if you are connected to the internet has disappeared. It is connected but

  Do you mean that on the far right of the taskbar, the network icon disappeared?

  If so, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go directly to the three method ...

  3. for the network icon
  (B) to activate the icon network - Enable_Network.reg< click="" to="">

  Then follow the instructions in step #5 to #9.
  Don't forget to restart the computer to perform the procedures.

• How can I export images from Photos with Lightroom or Photoshop?

  How can I export images from Photos with Lightroom or Photoshop?

  Use the file ➙ export Original unmodified for Photos X menu option.

  

  

• How can I download images from cf card

  I put the cf card in the card reader and click on get images from the camera, but it can not find all the images.

  Double post

  IM using a mac how can I download images from a cf card after it is inserted into the card reader

• How can I move images in dreamweaver cc2015?

  Hello

  How can I move images in dreamweaver cc2015?

  Found this somewhere on the web

  Tried, but couldn't work

  -------------------------
  

  To move images in Dreamweaver CS5 follow these steps:
  
  1 with your Adobe Dreamweaver CS5 application, open your HTML document
  2. Select the option "Split" at the top of your window. This will display the design and the Code view.
  3. click on the image that you want to move. This will highlight the text from the image in the Code view pane.
  4. Add < div style = "position: absolute" > before the IMG code and < / div > after the IMG code
  5. click again on your image in the pane view of design. You will see a little blue square right at the top of the images on the left side.
  6. click on this little place and drag it to position your image anywhere on the page
  7. save your changes.

  ------------------------
  

  What are the ways to move an image in dreamweaver cc2015?

  Thank you.
  

  The instructions you found would make the

  container draggable and resizable image. It would also only work in design mode. If you Live View turned on, you would see no guides.

  This is probably the worst way to develop your page so, it honestly should never be done in today's Web sites.

  Use css floats, padding and margin on the position of the images and containers in your site. Position: absolute is to be used only in a few specific situations.

• How can I prevent the Panel 'Links' auto expanding whenever I select (eg. to move) a placed image?

  How can I prevent the Panel 'Links' auto expanding whenever I select (eg. to move) a picture - it's really annoying!

  Yes I hate it too.

  you have to hide the link info down. Click on the small triangle at the bottom of the palette. for some reason, adobe couldn't figure out how to make a text wrapping.

• How can I prevent updates from any application?

  How can I prevent updates from any application?

  In OS X goto System Preferences > > App Store and a tick "automatically check for updates.

  < image edited by host to remove personal information >

• How can I prevent email PDF (created in Acrobat) since opening in preview?

  When I send my PDF page, if it is open in a different default viewer ('Preview', etc..) it opens to the right size, (it is designed to open the full screen mode and is not in "Preview"), and the hyperlinks do not work and are cold.  Is this because of people with operating systems more ancient or old versions of applications? or something else?

  Can I somehow treat the pdf on my end until I have email to ensure that the pdf file is opened in Acrobat and bed and run correctly?

  I know that I can include a note in the body of the email asking to be open in Acrobat, but I want to 'take the moving parts', so to speak, because you can not always count on people to cooperate; (we all know how easy button it is just hit the 'delete'.).

  Please, someone tell me there is a way around it and a procedure that will ensure that one opened up like a document acrobat pdf default (help!).

  Thank you!

  You really can't prevent opening in preview. There was a post recently (in the region of forms I think) on the writing of certain information to provide information in preview, I recall. You must specify in your message that the PDF file must be opened in Acrobat or Reader and that the use of the preview can create an unacceptable presentation.

• How can I prevent popups symbol when I type "ss" or "ll" in a Word?

  How can I prevent OS X 10.11.6 popping symbols when I type "ss" or "ll" in a Word?    In some contexts, typing the second 's' or 'l' is effectively blocked until I have press a different key.

  Hello

  Do you mean a screen pop up as below?

  

  Don't hold the s or I or other key too long.

  When you hold down too long, you will get a screen pop up with characters / diacritics.

  Maybe you should clean the keyboard?