How can I remove a custom preset in the Panel

Similar Questions

• How can I remove a tool preset in the drop down list?

  I find the predefined tools so confused. I've created several toolkits and one I want to delete in the drop-down list. How can I do this?  I lost so much time trying to understand this. You are my last resort.

  Thank you!

  To remove all remove my Paint Tools.tpl file located in the Tools folder the slot location. You can also navigate to the folder the crib of Preset tools by selecting 'Load predefined tools', and then remove the .tpl file. You will need to restart PS to load the Preset change.

  Default memory

  The default location to save/load/replace the predefined settings depends on your operating system.

  • Windows 7 and Windows Vista: [drive]: \Users\\AppData\Roaming\Adobe\Adobe Photoshop [version_number]\Presets.
  • Mac: Library/Application Support/Adobe/AdobePhotoshop [version_number]/ Presets.

• How can I remove a list entry in the Panel when the software has been removed from the computer

  I have an entry in Add or remove programs in Control Panel. but I don't have the software on the computer.  I have microsoft works 9 installed, but in the Panel, it shows the entries for the two works 9 and works 8 and it is the entrance to work 8 to that I'm trying to get rid. If I click on the entry and then click on delete, I get an error message indicating that the resource does not exist. any suggestions would be greatly appreciated. It does not stop works 9 the work but it is a little irritating problem. Thanks in advance.

  Hi ronparsons,

  You can follow the below mentioned article that should help you to solve the problem.

  How to manually remove programs in the Add/Remove Programs list

• How can I remove selected Custom view (s) of the event viewer Console tree?

  I looked at the MMC Help on create and manage custom views.

  I can't find a way to remove the custom filter views in the Console tree, which can be found on the left side of the event viewer.

  How can I remove selected Custom view (s) when they serve no more values?

  Problem solved

  I asked this question because I was unable to see what was going on in the event viewer and I couldn't find help in mmc HTML Help. However, now I see what's happening and I can give you a solution to my own question.

  Cause

  If I connect to the computer as a user with administrator privileges, I am able to use the event viewer to create a custom view filter that can be used by all users who have access to the event viewer. If I fix remove a view filter custom Console tree, I can't delete it unless I'm logged in as the user who created it.

  Solution

  1. Log the computer as the user who created the custom view.
  2. Start Event Viewer
  3. Use the right-click of the mouse on a custom view filter selected in the Console tree, open the drop down menu.
  4. Delete appears fourth in the bottom of the menu if and only if you are logged on as the user who created this view.
  5. Select Remove to remove the filter to custom view.

  If Delete does not appear in the drop-down menu, then it may not possible you connect as the user who created the custom view.

• Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?

  Original title: upgrade Windows 10

  I have a Dell Studio 1749 under Windows 7 Home Premium.   I postponed the upgrade of Windows 10 to the present day.  The update file appears in the control panel Windows Update Panel, but when I click start it restarts Windows 7 simply and tells me that the new updates have been installed but it was Windows 7 updates since yesterday.

  Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?    Or maybe another solution?

  Thank you.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• How can I remove a credit card on the app store?

  How can I remove a credit card on the app store? I can't download apps because it makes me sign then goes to check and it keeps saying method declined.

  < re-titled by host >

  Click here for an asnwer.

  Change or remove your information from payment of Apple ID - Apple Support

  Hope this helps, good luck to you.

• How can I remove a redundant entry of the Windows Vista 32-bit NT loader;

  How can I remove a redundant entry of the Windows Vista 32-bit NT loader; (The entrance there is an older operating system).

  Hi poomoon,

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If this does not work, let us try to restore your computer to a previous state of safe mode.
  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. in the System Restore dialog box, click Next.
  4. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  5. click on finish.
  6. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  I suggest that you create a restore point before you follow the instructions below.
  How to manually create a restore point?

  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.

  In the System Protection dialog box, type a description, and then click on create.

  You can also try to remove the entry by using bcdedit command in Vista by following the links below.
  1. click on start.
  2. type cmd and click with the right button on cmd.exe to select run as administrator.
  3. Enter the following text.

  bcdedit [{ID}] /deletevalue datatatype

  The {ID} is the GUID associated with the start-up input. If you do not specify a {ID}, the command changes the current operating system boot entry. If a boot entry is specified, the GUID associated with the start-up input must be enclosed in braces {}. To view the GUIDs for all active startup entries, use the bcdedit/enum command.

  For more information, please see the links below.
  http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx
  http://msdn.Microsoft.com/en-us/library/aa906211.aspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How can I remove, hide not only, "on the subject" my guide?

  How can I remove, hide not only, "on the subject" my guide?

  Try clicking on View > pods > project implementation.

• How can I remove a black stoke when the stoke color is transparent?

  Hello

  I hobe you can help me. I have a way is white and the stoke color is transparent, but it seems that it is black. When I record, he is still there.

  How can I remove it?

  

  Window > layers

  Window > appearance

  These two indicators show you that something that applied to a layer

  It goes the same for a group

  

• How can I remove Adobe flash player for the local storage on my screen?

  How can I remove Adobe flash player for local storage of my screen?

  Hi johna78039225,

  See this document for Windows system KB Uninstall Flash Player | Windows

  For Mac system refer to this document KB Uninstall Flash Player | Mac OS

  Kind regards

  Nicos

• How can I remove my adobe id after the end of the 30 day free trial creative cloud?

  I want to remove my adobe id among my Mac free of 30 days trial is over.

  The Advisor on the online chat was not able to help as he said that they do not support free trials.

  He advised the forum.

  Can anyone help?

  Hello

  Please see the following links;

  Manage your Adobe ID account

  The Adobe ID, log in using account and

  How can I remove the Adobe ID?

  How to remove the Adobe ID

  If you want to uninstall Adobe Creative cloud products test please see Uninstall or remove Adobe Creative Cloud applications

  Kind regards

  Bani

• How can I remove a virtual machine from the mycomputer tab entry?

  I imported a virtual machine, and then moved the files and it has opened its new location and now I have two similar entries in the tab "MyComputer".  I'm under VMWorkstation 9.  How can I remove the old entry that opens is more because the files are not there more?

  I've found that a right click works indeed to remove the context menu when you are on the part of the library, but when I was in the My Computer tab, right click does not work.  I had my library closed shutter, but once I opened it and tried, I managed to solve the problem.  Thanks for the help.

• How can I remove an additional editable in the head of a specific page?

  I have a single model site.  My model is the standard two regions editable in the head ('title', 'head').  Somehow, one of my pages ended up with three regions editable in the head - two named 'head' as well as the title.  My model refresh this page because editable regions do not match.  How can I remove this extra editable area of the top of the page?  I can't change it on the page itself, of course, and I can't remove it by changing the template because it is not part of the model.

  Thanks in advance!

  Your child page does not contain editable regions, if it was not attached to a model.  Maybe you nest templates which is the wrong thing to do.

  Go in modify > templates > detach model.

  Nancy O.

• How can I remove invalid develop presets

  Hello.

  I got Lightroom on my Mac for a while.  I went through periods where I use it, and then periods where I have not.  In one of these iterations, I had sort of a list of development presets that are not valid.

  When I go to the section to develop, I have about a dozen predefined files.  In my directory [~/Library/Application Support/Lightroom/develop Presets], I just 4 files that I just created this morning for a new built-in, group that I just bought.  Unfortunately, other elements inside Lightroom are causing Lightroom to give an error "the file is not found" and won't let me open or close files, or remove those that do not exist.

  How can I clean this list and get rid of the invalid elements?

  In which case they are built-in, the list which is not in my Application Support directory are:

  Lightroom B & W filter Presets

  B & W Presets Lightroom

  Color of Lightroom Presets

  Effect of Lightroom Presets

  General of Lightroom Presets

  Lightroom Presets video

  If I can back those who would be even better.

  Thanks in advance.

  OK, I deleted my Lightroom settings and live again.

  I followed the instructions here:

  http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• How can I remove programs from starting when the system boots.

  REMOVE AN ARTICLE FROM THE START UP PROGRAMS

  Whenever I start my computer, it opens and begins to operate more than one program automatically. One is pinned to the taskbar, but others are not. How can I tell the computer which I do not wish for the programs at startup? Any help you might be able to give is gratefully received. Thank you.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902

  Start the program and click the Connect tab uncheck the entries that you do not want to start.

  Not uncheck anything that you are not sure you know what it is. Your computer may not work correctly or may not even start.

  You can also look at the options of programs that start automatically. It may be possible to disable them.

  Look in the startup folder in the start all programs Menu. Right click and delete any entries that you don't want.