How can I reset my computer Windows Vista to factory default. Including deleting everything which was not there, out of the factory.
I want to learn to back when I bought it. I know older systems have so I thought it was her. Ive had it worked on and everything I want to just go back to when I got it it please.
Hello
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246
Tags: Windows
Similar Questions
-
I have a netbook with no disk drive that is running Windows Vista. When I try to turn it on, it tells me that a file is missing or damaged and that I have to install my Windows disk and select repair. Seeing that I don't have a hard drive on my computer, How can I do to repair vista windows?
Hello
Netbooks have the option to reinstall the operating system to when it was new.
They have a recovery Partition on their hard drives the same as most laptops and desktops...
You should ask the Netbook Manufactuter for particular key sequence to begin a recovery.
Some manufacturer's instructions are to press F10 or F11 at startup; others are Alt + F10, etc..
The installed software doesn't have knowledge written in programming to realize that you have a Netbook and you are unable to insert the disc. That's the way it is written, unfortunately: one size.
And some more expensive Netbooks now have a DVD player.
See you soon.
-
How can I recover my computer to its original factory State?
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: How can I recover my computer to its original factory State?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: How can I recover my computer to its original factory State?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hey elcuervo33
Contact the computer manufacturer and ask them to send you the vista recovery disc reinstall vista to how you bought your computer
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
Walter, the time zone traveller
-
How can I reinstall Solitaire in Windows Vista?
I deleted my computer solitaire awhile back. Now, I want to come back. How can I download or reinstall of Vista Home Premium 32 - bit OS Solitaire?
I just tried the following method: Control Panel, programs, turn Windows features on / off (disabled Solitaire and then selected solitaire), restarted. My program folder files poster now a solitaire.exe file, but it is not run/open.Suggestions?Hello
You can follow these steps below to activate the Windows feature set and check if it works.
(a) click Start
(b) click on Control Panel
(c) click on programs
(d) under programs and features, select Windows features on or off
(e) check the box games
(f) press OK
For reference:
-
How can I fix search for windows vista sp2
original title: repair of search for windows vista sp2
I don't have a problem with my Microsoft updates, but stopped my search on the functions of my office functions. I have Window Vista Home Premium 32-bit with Service Pack 2 installed. How can I fix my computer search functions?
Hello
If this happened recently possibly a system restore will help:
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
------------------------------------------------------------------------Windows Search does not work or research are slower
http://support.Microsoft.com/GP/windows_searchTroubleshooting Windows Vista search & indexing errors
http://www.WinVistaClub.com/T24.htmlReconstruction of the Index in Windows Vista
http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/
How to enable or disable the search Index in Vista
http://www.Vistax64.com/tutorials/69564-index-enable-disable.html
Improve Windows searches using the index: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions================================
Tips for finding files
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-filesHow to use advanced search in Vista Options
http://www.Vistax64.com/tutorials/75451-advanced-search.htmlHow to restore the page button on the Start Menu after installing Vista SP1
http://www.Vistax64.com/tutorials/145787-Search-start-menu-button-restore-after-SP1.htmlHow to restore the context Menu item search after installing Vista SP1
http://www.Vistax64.com/tutorials/134065-search-context-menu-item-restore-after-Vista-SP1.htmlHow to create a shortcut on the desktop search in Vista
http://www.Vistax64.com/tutorials/126499-search-desktop-shortcut.html----------------------------------------------------------
Win Key F opens advanced search
Searching in Windows Vista, part 1
http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box -
How can I reset my computer to factory settings
original title: factory settings
How can I reset my desktop to factory settings trying to avoid having to reformat my computer crashes, freeze and are very slow, I tried f10 at startup, do nothing please help :)
Access the manufacturer's Web site, search for their knowledge base. Ask in their forms. Ask support.
-
How can I reset my computer to the way it was the day I got it?
How can I reboot my computer to the way it was the day I got it?
Hello
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
-
I need help restoring Windows Vista on my computer. Please help this is finals week and I need my computer to take my final.
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash when you're back running.
They will tell you how to do this.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
How can I request media for Windows Vista to re - install on my computer?
Re-installation of Windows Vista
Hello
The hard drive on my ispiron 530 has recently developed a fault and damaged my version of windows Vista.
One of my friends then installed a copy of windows 7, I think now is an illegal copy because it requires an activation key, that I don't have.
How can I get a copy of windows vista to re - install on the computer and I can use that came with my system activation key to activate it.
Thank you
Hello
Call Dell and ask them to provide you with a recovery disk to reinstall back to the factory settings.
Manufacturers that make normally for a fee.
Recovery of computer manufacturers discs normally do not require a product key of your share entry.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer case will determine which Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
See you soon.
PS as you do not have a Vista disc read this:
If you have never received a recovery to buying disk, you should have a recovery partition on your hard disk to reinstall Vista from except if it has been damaged or removed from your drive hard when you install Windows 7...
You don't give any information about the replacement of the hard disk. Everything you say is that it developed a fault, that a friend installed Windows 7.
If you somehow fixed it and continue to use this drive, read about it using the recovery partition.
If using a new hard drive to ignore it.
-
How can I reset my computer back to factory setting. I have just the Basic windows 7
my computer is slow, and I just want to delete everything off and reset back to factory. I'm still all disks that came with it
Page 44
http://support.Dell.com/support/eDOCS/systems/ins1545/en/SG/F123HA01MR.PDF
-
How can I reset my computer back to factory settings?
need help to reset my computer back to factory settings. I saw once, but can't seem to find it
Hello
You can find a good description of the recovery options for desktop PC on the corresponding link below.
Recovery options - Windows Vista.
Recovery options - Windows XP.
Kind regards
DP - K
-
How can I restore my laptop Windows Vista to allow me to move my photos...
My neighbour who took the week last to mess with my Windows Vista laptop and did a disc defrag with a bunch of other things that I don't have any
idea of what it does? She stole the handle when I asked politely to restore my pc, so there is no way of knowing me now what she did :( Thank God, thanks to your site I was able to restore my icons and can now see my photos instead of empty folders! My question is now,
When I download pictures, a window opens which used to give me an option (Edit) move my photos that I download the folder of my choice. I don't have this option on this window. All it shows is "Organize", "Views", "Slideshow" and "Burn". Any chance to get this window with the option to move my photos into different folders? Any help would be greatly appreciated...
Hello
See if that helps you.
Do a system restore, if necessary using the safe, before your neighbor has changed anything.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
See you soon.
-
Can I upgrade my computer Windows Vista 32 bit to 64 bit with the specs of my computer?
Here's a question. I want to upgrade my pc to a 32-bit - 64-bit, 120-750 hdd hard drive and the RAM to 4gbs. is it possible for a 32-bit processor, 512 MB RAM oringally vista home 120hdd?
original title: everything just curious...Hello
Check with your system manufacturer (manufacturer of motherboard for custom systems) to see if your computer
can run Windows 7. If so check to see if it can run 64-bit which has higher minimum
requirements than 32-bit. Finally check to see if the hardware upgrades that you make will be
work in this computer. Don't forget if you spend a lot of money on upgrades, you may have
but could a new computer for the same price. And then you'd have two systems.Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements32-bit and 64-bit Windows: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions64-bit support
http://www.Microsoft.com/Windows/Windows-7/features/64-bit-support.aspxRun the Upgrade Advisor, and check with the center of compatibility for your key features. Also
some system manufacturers have the online help and information for the upgrade to Windows 7.Windows 7 Upgrade Advisor - run this http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx
Also check the Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspxTo see if you can run XP, Vista, or Windows 7 64-BIT, you will need to check with the system
manufacturer if it is 64-bit capable. Are there drivers 64-bit for all devices? To run 64-bit you
need 64-bit drivers (and the system must be able to run this version of Windows 64-bit).I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How can I reset password on windows
I forgot my passwor for add and change user accounts please help
Hello
You must have done a reset disk until you forget the password
read this to be done in the future
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk
It's too late now
We can not help you
I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords
read the policy at the link below
-
How can I run a program Windows Vista Windows 7?
How can I run a window vista program in a window 7?
Many programs of Vista will install and work without problems under Windows 7. If you find difficulties try compatibility mode:
http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows .
You can also check the compatibility of programs on the publishers program Web site or here:
http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/Home .
Also, specific 64-bit programs will not work on 32-bit Windows (regardless of whether it is Windows Vista or Windows 7, etc.). Most, but not all, 32-bit programs will run on 64-Bit Windows. For more information. Please see:
http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions .
Maybe you are looking for
-
Before I updated Firefox, my tabs were on the same line as the search/url bar, and I had no previous/next buttons. I liked the simple design I had, but now it doesn't seem like I can return to this setting.
-
Garbage is displayed only in Gmail.
In gmail ONLY, symbols of garbage re appear instead of the gmail page. I have uninstalled/reinstalled, checked codes UTF and there tried virus scanning.
-
Research of Google of Safari works do not.
Safari Google search results returned, but none of the links work. Did somebody encountered this problem? If so, how to fix it.
-
iPad is running 6.1.3 but cannot install 9.2.1
Mini iPad is running 6.1.3 and downloaded 9.2.1 but cannot be installed due to the "error".
-
Unfortunately, I have more the CD of Installation HP. Currently, it is connected via a USB cable. Finally, I want to use Wi - Fi.