How can I stop all loop with number completely?
Hello
I want to stop any loop in a specific State. It's a part of my project.
for example, I want to stop everything in a loop after that the i is 12. I can do, but the problem is that any new from 0 after the i is 12. I want to campletely the stop after the i = 12 I ever change
I am attaching a photo to delete.
Thank you very much.
Tags: NI Software
Similar Questions
-
How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)
How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)
If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this
Here's a suggestion on how to do a 'clean ': install
[quote]
For testing purposes, it is best to install Windows "clean".
It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
This procedure is for Windows 7, Vista is similar (but has 2 service packs)You will need your installation/recovery DVD (s) before you start. Once you wipe the hard drive, there is no going back!
1 back up all your data.
It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.
2. connect the system to the internet (if the system shows then disconnect from the Internet, do).
3. use one of these free utilities to wipe the hard drive:
DBAN ( http://www.dban.org/download )
KillDisk ( http://www.killdisk.com/downloadfree.htm ).
This will also remove the system recovery partitions - so the installation/restore DVD is essential!4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!
5 visit Windows Update and get all updates
6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)
7 visit Windows Update and download the Service Pack 1 (normally under important updates). Read these notes for installing SP1: http://support.microsoft.com/kb/2505743
8 visit Windows Update and get any other available updates
9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).
If problems persist, then the problem is probably with your hardware.
Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys. 2004/2005 is a problem, 2009,2010 is OK. Updates are available on the Web from Asus site.
Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys). To update this driver immediately!
[/ quote] -
Windows XP Media Player is automatically putting the wrong info for my pieces for example the name of the album and the cover.
How can I stop all the automatic update of news media?
Windows XP, the version of Windows Media player to date. ' Retrieve additional information on the internet "is not checked.
"Rearrange music in rip music folder, using rip music settings" is not checked
"Keep my ratings stars as global ratings in files" is unchecked
"Maintaining the codecs automatically" is unchecked.
Under Privacy Options, everything is disabled except "set clock on devices automatically.
Thank you for your help in this endevor.
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?
3. what version of windows media player do you use?Try the fix tool in the following article and verify.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/See also:
Resources for the resolution of problems in Windows Media Player
http://support.Microsoft.com/kb/843509 -
goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?
goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?
You use a Mac, or you're on another platform?
Any other use of platforms:
- Mac: Firefox > Preferences
- Linux: Edit > Preferences
- Windows: Firefox > Options
Press F10, if the menu bar is hidden under Windows and Linux, or use "> Firefox Options/preferences.
-
How to cancel my account on adobe? I forgot my code. I've notified on a monthly subscription. Still, they take the money on my bank account. How can I stop all this please?
-
How can I stop the looping SOUND?
Newbie here.
I created a movie that makes a loop at the end of the last image. I have a built-in Sountrack'u which exceeds the sum of the last frame of the movie. When initially film loops, another copy of the audio clip starts playing on top of the initial melody (MP3). How can I stop the audio clip to restart when the movie back surrounds? I want just the 1st copy of the sound at the end and STOPS when the fact... or restart... I don't want it to start on top of itself...Cody21,
> How can I stop the audio clip to restart when
> the movie back surrounds? I want just the 1st copy
> the sound at the end and STOPS when the fact... or restart
> .... I don't want it to start on top of itself...Well, the sound is positioned in frame 1, probably, no? During the
playhead enters frame 1, the sound goes off again. There are a number
ways to configure your sound. Two basic methods are events and streams, which
You can see the area of synchronization of the property inspector when you select the
the frame that contains the sound. Event means that the audio load in memory all the
at the same time and plays; Stream means that it has locked in step with the timeline.
Stream means it does not start on top of itself - but it also means that audio
stop when the timeline does.If your audio starts an image 1, I could see Adding a quick
action gotoAndPlay (2) in the last frame of your timeline. Who would jump
the playhead spent Framework 1.David Stiller
Adobe Community Expert
Dev blog, http://www.quip.net/blog/
"Luck is the residue of good design." -
Go for the summer. How can I stop all mail entering particularly undesirable!
We will be at our cottage North of Wisconsin for the summer. I want to stop all mail incoming (mostly useless) until September. Is this possible?
Optionally, you can contact your ISP and ask them if they can temporarily deactivate your account while you are gone. I've never done it myself, but it might be interesting to try to avoid having to go through hundreds, maybe thousands of meetings, extensions of the body part, malfunctions and other large email
When you get back. SC Tom
-
WHEN YOU IMPORT MY VIDEOS THE SYSTEM FILES IN ONE DLL FILE FORMAT, HOW CAN I AVOID THS IN THE FUTURE AND WHERE THE
I FIND THIS FILE IN MY COMPUTER AND HOW EVEN OPEN. MY COMPUTER IS RUNNING WINDOWS VISTA HOME PREMIUM SERVICE
PACK 2. THANKS FOR YOUR HELP IN THIS ISSUE YOUR FORECAST AND BEST WISHES, ALAN.
What is the brand and model of the camera?
How_exactly_are to import you video files?
-
How can I create a loop with delays in the series?
Hi all
So I wrote a Labview program to control both machines. Very simply, one is a source of tension, and the other is a Lock-In amplifier. What I want to do is change the applied voltage, wait a few seconds for the response of GARLIC to settle, then take a number of measures of GARLIC, then those on average and save to file.
Here is a flowchart of what I mean:
I did it for the most part, but I'm having a little trouble with the delay. VI file is huge, so I tried to make a simplified architecture that shows the basics of what I do:
(The string and the constant matrix constants aren't actually what I use, it's just to illustrate, because I don't know how to make a quick easy space reserved for diagrams... is there an easy way?)
So my assumption here (and it seems that it is happening) is that, for each iteration more outside of the loop, the first thing it does is start the countdown and start the change applied voltage/etc. at the same TIME, right?
And then he only goes in the loop of measure LIA once she completed both of these tasks, right? (Please correct me if I'm wrong!)
Then, how would make a delay after the loop of measure LIA? If what I've said so far is correct, then if I put a 'waiting' in the main loop, I don't think that it works (or at least not be very specific) because he would begin as soon as the iteration, would therefore be cash while GARLIC measured, and so do not wait the right amount of time after the loop LIA was finished (if I even put that it is long enough that it was still underway after This loop was completed).
Am I correct in what I said?
What is the smart way to do this?
Thank you!
You're right about the order data flow, which is usually the fall of most starting LabVIEW developers.
To add a wait behind the inside loop, ask a node pending within a structure (the simplest being a structure flat sequence) and add some sort of data flow from the output of this loop to the structure of waiting. This will force this structure will not work until the loop ends.
That being said, there is a better way to do this. Look in the Simple State Machine with LabVIEW 2012 and more recent architecture model.
Edit: NIquist beat me to it.
-
How can I stop my computer with a blue screen coming up and crashing
Hello
my computer keeps crahing with a blue screan befor, I ran anti spy wear and its projection up to nothing. When it reboots it says. from what I can tell, it's the same thing all the time.
help please
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 3081
More information about the problem:
BCCode: 50
BCP1: 9131EB99
BCP2: 00000001
BCP3: 886F7C45
BCP4: 00000000
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini080812-03.dmp
C:\Users\ricky g\AppData\Local\Temp\WER-440422-0.sysdata.xml
C:\Users\ricky g\AppData\Local\Temp\WER204C.tmp.version.txt
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
Hello
Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crashTo BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer
See my answers, if this thread - top 3 responses (+ 1 other).We can analyze the minidumps if you make them available at the SkyDrive or other
file sharing sites (such as MediaFire). If you have problems downloading the minidumps
Copy it to the desktop or Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------------------------------------------
BCCode: 50 0 x 00000050
References to Vista also apply to Windows 7.
Have you recently added any hardware? Have you updated any drivers just before these
has started? (Check control panel - updates of Windows to see if all drivers have been updated
all the time this started) guilty likely hand are video driver, other drivers,.
memory and antivirus/antispyware/security products could be at fault, but also in car
questions.Use the troubleshooter below and refer to the following message for pilots and memory
When you get these sections and then back to the resolution of the problems according to the needs.BCCode: 50 0 x 00000050
Cause
The BCCode 50 usually occurs after the installation of the defective material or in case
failure of the hardware installed (usually associated with a faulty RAM, either main memory,
Cache L2 RAM or video RAM memory).Another common cause is a defective system service installation.
Antivirus software can also trigger this error, as can a corrupted NTFS volume.
Solve the problem
Solve a defective hardware problem: If the material has been added to the system recently,
Remove to see if the error recurs. If existing hardware has failed, remove or replace
the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
For more information about these procedures, see the manual of your computer.Fix a defective system service: Disable the service and confirm that this
resolves the error. If so, contact the manufacturer of the service on a possible system
Update. If the error occurs during the system startup, restart your computer, and press F8 to
character mode menu that displays the choice of operating system. As a result
Windows Advanced Options, select last good known Configuration option menu.
This option is most effective when a pilot or a service is added at a time.Solve a problem of antivirus software: Disable the program and confirm that this fixes
the error. If this is the case, contact the manufacturer of the program about a possible update.Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk
errors. You must reboot the system before the start of the analysis of disk on a system partition. If
the hard drive is SCSI, check for problems between the SCSI controller and the disk.Finally, check the system log in Event Viewer for additional error messages that might help
identify the device or driver that generated the error. Disable the cache in memory of the BIOS
could also resolve it.
BCCode: 50 0 x 00000050<-- read="" this="">
* 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050--------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue
Screen info that would help. Such as ITC and 4 others entered at the bottom left.
And other information such as codes STOP error and info such as IRQL_NOT_LESS_OR_EQUAL
or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
How can I calculate all the perfect number up to 10000?
I used Quotient and remainder vi but am still not able to VI of this... Please give me the solution
I understand that the problem is 2 times. You will need to do a factorization of a number and then summarize these factors to see if adds the number of original, right?
Therefore a loop, to quote and assistance from rest to build a table of factors (the input value must be staggered and recalculated when you find a factor), then do a sum of table and compare it to the value of the moose. Sounds fair? The perfect numbers should ofc build a picture of themselves, which is easily done in the external/next loop.
For any number, just do an outer loop around the whole shebang and feed it with the meter of the loop. If the internal test is true, adds to the table and you will have a table with all perfect numbers.
/Y
-
I have an infinite loop is and display of data. How can I end the loop with a button or a keypress?
Periodically perform a ProcessSystemEvents() call inside the loop. In a reminder of the STOP button, set a flag to indicate your loop to stop.
stop unsigned int = 0;
While (! stop) {}
data getmeasured
display the data
ProcessSytemEvents()
Sleep (250); to be polite: it is impolite to spinlock, since you will monopolize the CPU and other threads can get hungry
}
then, in the reminder for a STOP button
STOP the button callback routine
stop = 1;
-
How can I get all of the Office to appear above the task bar?
HOW CAN I STOP ALL THE WAY DOWN MY OFFICE OR WHATEVER PROGRAM TO ADDRESS TO APPEAR BEHIND THE TASKBAR INSTEAD OF ENTIRELY OVER THE TASKBAR, SO THAT ALL PROGRAMS OR DESKTOP IS VISIBLE?
On Saturday, August 14, 2010 18:36:51 + 0000, Ronnie Vernon [MVP] wrote:
Ronnie, this isn't my experience. On all my Windows 7 computers, if
you move a program window open to the taskbar and beyond, she too
passes under the taskbar.Ken Blake
Hi Ken
It is also normal, as Nathan described. You can 'move' a window behind the taskbar.
What I was describing is the default when you open a new window maximized. It should extend from the top of the screen to the top of the taskbar and not behind the taskbar.
Thank you and sorry for misunderstanding you. Yes, I agree.
If you have set on auto-hide the taskbar, this means a slightly larger magnified window, because it extends all the way to the bottom of the screen and if you appears the taskbar then it will cover the bottom of the open window.
Kind regards
Ronnie Vernon MVP
--
Ken Blake
-
I have a problem with repeated download of KB2633171 since 12/15/11, all successful. How can I stop it?
I tried MS FIXIT - but the problem persists.
Vista 32 bit
Hello
Have you checked the State of the KB2633171 in the history of Windows updates?
Method 1:
You can read the following article and try to run the islet fix verification.
The problem with Microsoft Windows Update is not working
Method 2:
You can also scan [SFC] System File Checker on the computer that will replace missing or corrupt files & check if the problem persists.
For more information, you can consult the following link.
You can also consult the following wire link and check if it helps.
-
Browser keeps opening with previous tabs from the previous day. How can I stop this?
Under Tools > Options > general, I have the browser when I open the browser to "open a white page" but it keeps opening the previous tabs from the night before. How can I stop this? I read the advice of the forum but not found or overlooked the answer. I checked all my other settings and can't find anything that could be the cause. Please advise?
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Maybe you are looking for
-
Question of replacement for the 770-107 - nVidia GTX 560 defective m - Qosmio X
Hi allI know that this has been posted on here several times, I have a qosmio x 770-107 and the gfx card has overheated and needs a reball, nobody wants to do and reballers ebay cannot give any guarantee as mxm3.0b is pretty new to them and they have
-
Deployment utility and Labview Modules
Hello I'm relatively new to TestStand. I created a TestStand sequence that calls a number of modules of Labivew. Everything works fine on my development computer. I'm deploying to another computer running a development basic license. I ran the utilit
-
Norton 360 on my computer identifies this file as c:\windows\system32\muweb.dll, Version 7.6.7600.256, Microsoft Update Web Control. Why should I install this file, if it is a real file everytime I open Microsoft Update? Is not install that once is e
-
I have xp pro, today just after the automatic updates from microsoft My stopzilla asked permission to update as new version available. downloaded the update, clicked on the subject facility to half way through after that windows install has deleted t
-
Bought Lightroom CC still talking evaluation (or how to have 32767 evaluation days...)
HelloI bought Lightroom CC 28 days with monthly subscription. But today Lightroom says "30 day trial" ended.I tried to sign in with my Adobe account and I got the following message:In English: "you can test this product for everyday 32767"... "When I