How can I stop error dw20.exe

Similar Questions

• How can I stop error 0x0000007E (0xc0000005, 0x8ef5ac0d, 0x8b357bf8, 0x8b357f4) code

  Here's the story:

  My cell phone is not responding, so I stop and restart. Then when I enter my user account, it is empty, no icon on the desktop no taskbar, only the slider that appears. I'm frustrated and don't know what to do. Since my laptop already has a few problems (it's a bit slow) so I decided to use the system recovery and restore the "factory shipped condition."

  Then I install any program that was previously in my laptop (firefox, software adobe reader, media player, flash player, player virtual clone, Utorrent, VLC player, WinRar, Internet Download Manager, Spyware doctor and NoAdware classic). But when I plug my laptop modem, I got a blue screen, and I am one of the software is not compatible with my modem. So I use the recovery system once more and intend to try the software one by one. I plug the modem first. then I got blue screen. So I try to uninstall norton internet security (he was there from the beginning) and try to connect the modem. He works so I thought that norton is the cause but I'm always worried, so I try the software one. Install software on my external hard drive, plug the hard drive, try plugging the modem, taken on the modem and try reinstalling other software). Until the latest software has been installed, there is no problem. Then I plug the external hard drive after installing the latest software and updated online using the modem (to open hotmail and send my homework) then I plug in the modem and plug my external hard drive to watch videos. Then, I suddenly remember to download something. So I plug the drive hard on and plug in the modem. Then I got a blue screen with this error:

  Stop: 0x00000007E (0XC0000005, 0X8EF5AC0D, 0X8b357BF8, 0X8B357F4)

  CDROM.sys: address 8F555C0D base at 8F14C000, stamp base 47918f7e

  Then I try to restart the laptop and try to connect the modem, but I got a blue screen with the same error code

  What should I do?
  How can I stop it?

  It would be helpful if someone can solve this
  Thanks :)

  * Sorry for my bad English *.

  Hi Patrick,

  I suggest you follow the given method and check if it helps.

  Method 1: Update your modem firmware.

  You can check with the manufacturer or contact the Internet service provider to update your firmware.

  Method 2: Alternatively, you can try to install service Pack 2 on your computer.

  Please follow the link below to install the Service Pack 2;

  http://support.Microsoft.com/kb/935791

  I hope this helps.

• How can I fix error HPSF.exe for HP support assistant?

  I have a HP Pavilion dv6 notebook.  HP support assistant has stopped working.  I get a message indicating HPSF.exe has encountered a serious error.  How can I fix it?

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• My Administration event log is 8000 + and new errors every day. Windows Explorer stops responding, how can I stop this?

  OT: my Administration event log is 8000 + and new errors every day. How can I stop this?

  My ACER laptop running VISTA family premium has many errors I do not understand why and don't know how to stop.

  Is how important it? Is this normal? Should I post each event with details to see if it can be interrupted?

  For example my lap top works generally OK but Explorer windows (explorer.exe) crashes with a message that it fails and restarts. The error code and events are

  Error 01/03/11 10:04:22 Application Error 1000 (100)

  Application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, module MSVCR80.dll, version 8.0.50727.4053, time stamp 0x4a594c79, exception code 0xc000000d, offset error 0x00008aa0, process id 0 x 624, failed failed application start 0x01cbaad15a2d1273.

  Thanks if you can help

  Hi Tricsim,

  Since when are you facing this problem?

  There could be several causes for this problem; I suggest you try the following steps to correct the problem:

  Method 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: You can follow the steps described in the article below

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".

  http://support.Microsoft.com/kb/937093

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)

  How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)

  If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this

  Here's a suggestion on how to do a 'clean ': install
  [quote]
  For testing purposes, it is best to install Windows "clean".
  It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
  This procedure is for Windows 7, Vista is similar (but has 2 service packs)

  You will need your installation/recovery DVD (s) before you start.  Once you wipe the hard drive, there is no going back!

  1 back up all your data.
  It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.

  NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.

  2. connect the system to the internet (if the system shows then disconnect from the Internet, do).

  3. use one of these free utilities to wipe the hard drive:
  DBAN ( http://www.dban.org/download )
  KillDisk ( http://www.killdisk.com/downloadfree.htm ).
  This will also remove the system recovery partitions - so the installation/restore DVD is essential!

  4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!

  5 visit Windows Update and get all updates

  6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)

  7 visit Windows Update and download the Service Pack 1 (normally under important updates).  Read these notes for installing SP1: http://support.microsoft.com/kb/2505743

  8 visit Windows Update and get any other available updates

  9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).

  If problems persist, then the problem is probably with your hardware.

  Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys.  2004/2005 is a problem, 2009,2010 is OK.  Updates are available on the Web from Asus site.

  Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys).  To update this driver immediately!
  [/ quote]

• PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?

  PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?

  Hello Mark.Mac,

  Thank you for your message.  Click HERE to run the Windows Installer Cleanup utility.  Once you have run the utility of your computer restarts and the functionality test.  You can also watch in download/install Windows Live Photo Gallery HERE.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I stop this tyring programmefrom on my computer... ZGL.exe, IT appears every minute?

  How can I stop this tyring programmefrom on my computer... ZGL.exe, IT appears every minute?

  Hello

  1st thing to do with something like this is Google and see what it is

  http://www.google.com/search?hl=en&source=HP&q=ZGL.exe&AQ=0&aqi=G1&AQL=&OQ=ZGL.exe

  It is Malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I stop adobe to open all my .exe files when it is installed?

  Software Adobe reader tries to open any .exe files. How can I stop it while having installed adobe?

  Well...  You provide all basic information: who is your O.S. (?)

  but:

  Using Microsoft Windows XP, use this page:

  http://www.dougknox.com/XP/file_assoc.htm

  Using Microsoft Windows Vista, use this page:

  associations.html http://www.kreslavsky.com/2009/03/Reset-and-Fix-Windows-Vista-default-file-extention-type-

  Please note:

  Any use of any registry fix is to your own responsebility & it is always wise to do a full backup of your registry before making any changes!

  Kind regards

  Fiat Lux !

• Receive vc system tray restart error message. How can I stop this on my laptop?

  Hello

  Get VCSystem plateau is restarting error message. How can I stop this on my laptop? My laptop model number is

  VPCEB4AFX.

  Hi nagk98,

  I'm sorry to hear that you are having problems with your laptop. The plateau of VCSystem is a process used by the VAIO Care program. To solve this problem is that you need to upgrade your VAIO Care program. You can uninstall and re install the program if VAIO update fails. You can check this link for more information on the VAIO update utility. I hope this helps.

  Thank you!

  Sean

  If my post answered your question, please mark it as "accept as a Solution.

• around mobile ie8 window on the desktop clears the icons. How can I stop this?

  The desktop icons are erased by moving a window open ie8.  If I go to dekstop properties and change the image of the desktop power returns.

  How can I stop this?   I use Windows XP.

  Hello

  1. you receive an error message/code?

  2. is the question confined with Internet explore?

  I suggest the following steps and check if it solves the problem.

  Method 1: I suggest you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

   

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you perform a clean boot, follow these as to configure Windows to use a Normal startup state from the article above.

  Method 2: search your computer of viruses and malware.

  Viruses and malicious software (malware) can cause often Internet Explorer slow down or stop working.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.

  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3: Let us first start the SFC scan and check if there are any file system corruption. You need windows XP disk to perform the analysis.

  1 put the Windows XP CD in the CD-ROM.
  2. click on 'Quit' if the auto-menu appears.
  3. click on 'Start', then click on 'run '.
  4. Type "SFC/scannow" (without the quotes) in the "Open" box, then click on 'OK '.

  Note: There is a space between "SFC" and "/ Scannow".

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• my email is sending email from my contact list that I am not aurthorizing. How can I stop this?

  emails are sent to all the addresses in my address book, seek.  How can I stop.  Yahoo SBCglobal account

  Hello

  Check with the help of your e-mail account, because they can also help if the emails are actually
  sending your account which is actually probably not. More likely, the spammers have
  a copy of your contacts or a copy of an email sent to these contacts.

  Proceed to a very thorough check for malware and then change your password by e-mail.

  It is possible for a person to send the email that 'seems' to be of your
  account but that is not really - called "Spoofing." That means its 'Possible' emails
  were not really you, although they may have your contact list. Have someone
  who receives the e-mails to check the header to see where he is actually sent by and
  NOT only the answer to the address.

  How to read the message headers
  http://www.high-speed-Internet-Access-Guide.com/articles/email-headers.html

  E-mail spoofing
  http://en.Wikipedia.org/wiki/E-mail_spoofing

  E-mail spoofing and Phishing
  http://www.mailsbroadcast.com/email.broadcast.FAQ/46.email.spoofing.htm

  Understanding E-mail Spoofing
  http://www.windowsecurity.com/articles/email-spoofing.html

  Fraudulent emails (false)
  http://pages.eBay.com/education/spooftutorial/

  Google search - email Spoofing
  http://www.Google.com/search?hl=en&EI=FB1nS9DiNo7CsQPNhKGdAw&SA=X&Oi=spell&resnum=0&CT=result&CD=1&ved=0CAgQBSgA&q=email+spoofing&spell=1

  =============================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-- download="">

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I stop CHKDSK from running on startup?

  CHKDSK turned on somehow and now every time I start my Pc it runs this program.  It is on my hard drive and takes a long time to startup!  How can I stop the program from running at startup?

  The next time your system starts and installs, you should check the bit of impurity of the volume as follows:

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  To query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Type "exit" to close the command prompt window.

  Is your disc dirty or it is not dirty?    If you have more than one volume, check all out them.

  A volume is marked usually dirty of a power outage or something like using the power button to restart the system.  One of this kind of thing has happened before this problem?

  The command chkntfs /d to clear a chkdsk waiting you plan yourself, but it does not clear the dirty bit.

  The command chkntfs /X C: never say XP check the reader for inconsistencies again and perhaps not a good idea since the reader may really need that chkdsk to run on it.  If the dirty bit is just NOT clear, no matter what you do, your HARD disk may be failing / failed.

  The only way to clear the dirty bit is a success of chkdsk /r and if she will not clear at the start of your system, I would run it from the XP Recovery Console so you can watch it run and if you like, run it again until it runs its own.  You cannot check the good bit of impurity of the XP Recovery Console, but you can see what chkdsk/r.

  Since we don't know anything about your system, here are some instructions for making a CD of bootable XP Recovery Console and from there, you can run chkdsk/r until it comes clean.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• How can I stop windows vista without updating the updates

  How can I stop windows vista without updating the updates because it affects my computer in error mode and I have to restore to get vista to startup after I reopen it later

  Hello

  You can change the settings for windows update to check for updates but let me choose whether to download and install them.

  Change how Windows installs or notifies you of updates

  You can also check in the update to the update history recently failed, double-click the update to get the error code and let us know.

  See the Windows updates are installed

  You can also read the following article to reset the Windows Update components and check.

  How to reset the Windows Update components?

• This program cannot display this Web page, how can I stop this coming on screen

  How can I stop this happening

  Hello

  1. when exactly you receive the error?

  2. What is the full error message you get?

  3. have you made a recent software or hardware changes to the system?

  You can perform a clean start and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

• How can I stop getting files that no longer exist in the SEARCH

  When I use the search I'm included in the list of the files/folders that no longer exist. Error message begins - the document name or path is not valid. How can I stop this? Thank you

  Hello

  Method 1: I suggest you run the fixit from the link and if it helps:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2: You can also try to rebuild the search index and check if it helps:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options