Similar Questions

• How can I tell if my Mac has been hacked v10.10.5

  In 'Window leave Force', there is a flashing line in and out very quickly it was something like: applekit txt... {code

  I have a Mac Book Pro (2013) v10.10.5 with all the updates that are loaded.  My laptop was running a bit slow... freezing for short periods of time when you save a document or work in Photoshop. I moved a large number of my large video files to a backup disk to ensure that I have a lot of space. After the restart, I had that Chrome and Photoshop and Finder running. In the FINDER, I clicked on FILE / NEW WINDOW FINDER and saw the Rainbow Apple "Spinning wheel" for more than 30 seconds while you wait for a new Finder window open.

  More and more impatient, I clicked on the icon Apple and "force quit." In the window to leave, I saw three running applications but also saw a line of red text jump in, then disappear very quickly a few times. I tried to take a screenshot, but couldn't.  The only thing I could catch was something like applekit .txt... {code and that's all I could catch.} I disconnected from the internet, and he stopped.

  You have reason to believe that your mac is hacked?

  Have you recently installed any software suspect?

  Do you have a person with access to your mac that can install something without your knowledge (which requires an administrative password and the access to the system)

  Apart from that you run any type of Mac anti-virus. If so most, if not all have been cited on these forums as points of failure on the Mac and in many, if not all cases of withdrawal of restores them the response and the functionality of the system. Well-known companies AV display the instructions to remove their products. At this time there is no known Mac viruses in the wild, which means no laboratory of titles in the world posted of any finding of a Mac virus that did appear on the internet at this time, please do not confuse this statement with the absurdity of "Mac cannot get viruses.", what I mean , it's "they don't seem still one and mac AV is not nearly as flexible as it is counterpart windows and has been known to cause serious problems and not offer a lot of protection.

  Secondly you are running any 3rd party utility system or network, once again, these products are known to cause problems and are not only necessary are often contrary to the OS X, remove them from your system.

  If you are not sure what you are using please post a report of etrecheck for the volunteers here to look further as to what your system is running, this report contains personal or confidential information. the software was developed by a long time member of this forum in the first goal to help mac users to isolate a problem in their system and has been very successful in doing this, an overwhelming majority of positions where he asked attests to that.

  https://etrecheck.com/

• How can you tell if a PSG has been included in a call?

  Is there an easy way to tell if a PSG is inserted in a call? Maybe something in the CDR? The destination IP address appears as CUCM, or IP address of the device called?

  I use CUCM 10.5

  Thank you, Tim

  The other thing to do (if it's a phone) is, know what resource PSG 'could' be invoked, from the media resource of the unit group, get the IP address of the resource and make a note of it.

  Make a call to the phone in question, go to the IP address of the phone and click on "stream1", keeping the open call, check what remote IP address, the call is goung to... If we use of the PSG, it should show the IP address f the resource of PSG.

• HP ProBook s 4540: How can I tell if my laptop has all the spare HARD drive bay or not?

  How can I tell if my laptop has all the spare HARD drive bay or not? I want to use an SSD, but also my HARD drive as secondary.

  @ShohagDr

  This model has only one.

  Your maintenance and Service Guide here.

  http://www.HP.com/CTG/manual/c03758231.PDF

  Laptop HP ProBook s 4540 - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=5229455&MEID=0B16F6F9-A9BB-4275-8FB4-57CCA3816318

  REO

• How can I tell if my computer has Excel on this subject and that so how do get me to it?

  How can I tell if my computer has Excel on this subject and that so how do get me to it?

  Check - in the search box type - excel

  It shows up?

  An excel Viewer Help, so you can see the files. If you work on them you need Microsoft Office or if you
  can use OpenOffice which is free.

  Microsoft's free excel file viewers

  Open Office - free
  http://www.OpenOffice.org/

  Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• How can I tell a hyperlink (< a > order) to open in a new window? Is there a specific code/command that must be plugged?

  How can I tell a hyperlink (< a > order) to open in a new window? Is there a specific code/command that must be plugged?

  http://www.example.com"target ="_blank"> click here!"

  "Target ="_blank"is the key.

• How can I get a driver that has been deleted

  I need how do I get a driver that has been deleted

  Hello

  go to the manufacturers website and download the driver again

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I tell if a user has access or was denied access to

  How will I know if a user has access or denied access to DBMS_LDAP without actually running the package.
  
  If access is denied how to grant and revoke access?
  
  Help, please!
  
  Thanks in advance.
  
  Published by: user12027903 on October 19, 2010 11:42

  Just check inside the DBA_TAB_PRIVS data dictionary you can get the details.

  Thank you
  Aurélie

• May have been wrong to accept the false update yesterday 08/20/11 How can I determine if false update has been installed?

  I was working today on our old XP, Firefox update failed because it was a trick. Yesterday a Firefox updated was approved on our laptop (Vista). How know if we ourselves have infected? Thank you.

  Do not worry. The message "something tried to trick Firefox" is just poorly written. This simply means that Firefox did not verify the certificate of the update and as a result has not installed. Other discussions on this message seem to suggest that this happens quite often and is not, in fact, an indication of "something try to trick Firefox", but a failure of Firefox itself.

  If the update has been installed on the second time, so this time that he managed to check the certificate, as well as the update is ok.

• Remote procedure call (RPC) - how can I determine if a person has been access to my system remotely? I think someone is.

  I think that my computer is accessed remotely, files and emails being read. I disabled remote access in the Services section and have also disabled Mobile Sync; I did not use one of these services.

  When I took the remote procedure call (RPC) service and open the properties, the logon tab has the section "This account" clicked, "Network Services" typed in the box and a password. I can't change anything on this tab properties. I can't disable the service or disable the 'unattached profile '. How access to this service to make changes and more importantly, how can I confirm that someone logging into my system to remote and checking e-mails, files, etc.. This isn't a networked system, it's my computer in my home office. I am running Vista Ultimate.

  Thanks in advance for your help anticiapted.

  Hello

  Ultimate also has group policies that you can set to lock the machine - GPedit.

  Management of Windows Vista Group Policy (part 1) - see links to part 2 and 3
  http://www.windowsecurity.com/articles/managing-Windows-Vista-Group-Policy-part1.html

  Don't forget someone might access your email on the server, so do not forget to set a new password.
  As someone else has physical access to the computer?

  System Services stop isn't really the best/correct method to ensure safety.

  1. make sure that the system is free malware:

  Do a thorough check of the malware as no program detects and removes everything. Easy to find addition
  Malware is often accompanied by more difficult to discover and remove the payloads. Better to be cautious
  now that suffer the consequences later.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  =======================================
  =======================================

  2 configure security - get a router with a built-in hardware firewall to add to your safety.

  Check with your router manufacturer and their forums because they usually have great information.

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I reinstall PhotoShopCS3 and HD has been cleaned?

  How can I reinstall PhotoShopCS3 after that HD has been cleaned?

  Thank you

  Hi Larryc23776909,

  You can download it from here https://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  Find your key series here:https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if it works!

• How can I publish that the problem has been resolved?

  How can I select RESOLVED?

  You can post in a thread that wrote you that you consider the post a person brought the solution.

  In a thread only the initial post didn't accept it as a Solution in the bottom of the post.

  Click the accept as solution in the post that you consider to be the solution.

• How can I detect if a step has been ignored?

  In an application of C-Sharp, is there a way to detect if a step has been ignored once completed execution?

  ApplicationMgr.GetRunState () and ApplicationMgr.GetTerminationState () do not say if the execution was complete (Nothing ignored) or incomplete (1 or several steps skipped).

  I have to walk through the steps and use the Step.GetRunModeEx () method?

  Hi tlaford,

  You will still need to check each step, but I believe that what you try to do better with the use of Step.ResultStatus:

  ResultStatus property

  Syntax

  Step. ResultStatus

  Data type

  String

  Goal

  Specifies the status string for the step.

  Remarks

  Although you can set custom status strings, this property is usually set to one of the Proprietesde constants.

• I accidentally deleted my recycle bin how can I empty it now, it has been deleted for quite some time

  How can I empty it now?

  You can take:

  1. right click on an empty area of the desktop
  2. Select Customize from the context menu that appears
  3. in the column of the tasks in the left pane, select "Change Desktop Icons"
  4. under the desktop icons, click the checkbox in front of the basket to check.
  5. click on apply and OK

• How can I access my hotmail account has been blocked

  My hotmail account has been blocked due to anti-spam. I need to access my Hotmail Acount as all my stuff and personal mail is received. Also I didn't have a back-up of all my business and personal contacts.

  Thank you

  Hello

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com