How can I use my drives on my Satellite L300D revovery?

Similar Questions

• How can I use my drive hard thunderbolt from 8 TB to backup all my wireless devices?

  How can I configure my drive hard thunderbolt from 8 TB to back up all my devices using a Wi - Fi connection?

  What you might hope better would be to use a Thunderbolt-to-Ethernet adapter to connect to the router, but even if it works, it would be like a fire (Thunderbolt) connection to a water hose (Ethernet) is launching... and expect to get more water on the hose... more, the best that can be done without wire will be about half the speed of the Ethernet network.

  Sorry, this is no sense... a Thunderbolt drive is designed to connect directly to a Thunderbolt port on a computer, or in a Garland with other devices Thunderbolt.

  In other words, as soon as you break the chain of connection Thunderbolt, the speed drops to Ethernet or even low speed wireless.

• How can I use your bluetooth with my Satellite L650D - 14L devices?

  Please can someone help me on how I can use your bluetooth with my Satellite L650D - 14L devices?
  I don't see a bluetooth icon helping manange bluetooth connections.

  Thanks for your help.
  Concerning

  Hello

  You cannot connect any BT device for this laptop because it was not equipped with any BT module.
  BT is therefore not available for this device.

• How can I get the driver for Toshiba satellite pro M40X VGA

  My venus of toshiba with a Xp operating system I now changed to Windows 7.

  After you install the new windows, I found out today that my VGA is not driven. PLs, how can we drived by my VGA & were I can find it.

  The graphics card in your laptop is an Intel® Extreme Graphics 2, which is not supported by Intel for use with Windows 7. There is nothing you can do to change.

  The best operating system for your laptop is Windows XP...

• How can I remove optical drive of the Satellite P300-156?

  Hello

  I just ordered a HD-DVD-R (Toshiba SD-L902A) for my P300-156 drive, but I don't see how I can remove my existing laptop DVD - RW drive.

  Does anyone know how this can be done without opening the case?

  Hello

  To remove the CD/DVD drive, first remove the screws of this CURIOUS.
  The screw is hidden under the keyboard.
  Therefore, you will need to remove the keyboard first.
  The keyboard is fixed with 2 screws. These screws are hidden beneath the thin plastic (door-KB)
  First, you must remove this support KB to get access to these two screws.
  After you remove the keyboard, you will find a screw that holds the ODD. Remove it and disconnecting an optical disc drive to the connector on the system board.

  But note; Be careful and all you are doing is at your own risk AND PERIL!

• How can I reformat the drive of the Satellite Pro A100?

  I have a Satellite Pro A 100, that my son has used for more than a year in College!
  There is so much junk on I think that a reformat would be the easiest option for erase everything.

  However, I can't find any way to do it. I tried the usual methods. Start, Control Panel, Admin etc, but the format option is always deleted.
  I even tried to run, using 'format C:', but was informed that the reader was already in use and could not be formatted.

  Suggestions, please.

  AND, I need a CD from Toshiba to replace all the files of Toshiba, or they are in another partition on the HARD drive?
  Thank you very much

  Hello

  You need a CD of the OS or the Toshiba Recovery CD to format the HARD drive and reinstall the operating system.

  The Toshiba Recovery CD contains the image of Toshiba. It s a package which contains the OS, driver Toshiba, tools and additional software.

  I would recommend using the Toshiba restore for formatting and reinstallation CD.

  And the best is that you would not need to install the drivers because the Toshiba Recovery CD to install everything in one step!

• How can I get a driver for my satellite toshiba sd card?

  model number 7B333701W

  See the laptop manufactures support site.

  http://support.Toshiba.com/drivers

• How can I use the copy of Windows XP from the desktop on the laptop?

  loading xp with a different product code

  I have a laptop that works under XP. I lost track of the original disc. I also have an office which was under XP but Win 7 is working now. I have the XP installation disc. How can I use the drive of the desktop on the laptop?

  I dought you would get away with it. Try kb892130

  Or the pc on a xp boot cd, reinstall xp with xp cd.

• How can I use my time capsule as a hard drive on an existing network accessed through a password

  How can I use my time capsule as a hard drive on an existing network, storage, accessed through a password?

  We need more information in order to provide the right solution and Setup for you.

  You already have another router Apple... as an AirPort Extreme or Airport Express that provides the signal of your wireless network?

  If not, what is the serial number and model of your modem?

  Finally, what operating system is installed on the device you will use to install and configure the time Capsule? If it's a Mac and you're not sure what operating system it uses... click on the Apple icon in the upper left corner of the screen, then click on about this Mac, and post back with number of Version of OS X that you see there.

• How can I use HP SureStore to back up my entire drive, including records of other users on the PC?

  How can I use HP SureStore to back up my entire drive, including records of other users on the PC? I have a Windows System 7 and currently, only backups HPSS my file user rather than the rest folders of the users (family members). I do not see where in the feature options where I indicate that I want to include all users in the backup files.

  burtech wrote: How can I use HP SureStore to back up my entire drive, including records of other users on the PC? I have a Windows System 7 and currently, only backups HPSS my file user rather than the rest folders of the users (family members).

  I do not see where in the feature options where I indicate that I want to include all users in the backup files.

  Hello burtech, I wouldn't recommend using the HP backup program or the Windows backup program to backup my system.

  There have been many members who have reported many problems, try to restore the files by using these programs.

  I suggest you to acquire a hard drive image software. These programs can do a mirror image of the hard drive and save it in another location, on a second hard drive or an external hard drive.

  If the system is damaged, just insert a CD in the optical drive and boot the system, select the hard disk image and restore the system as it was when the hard disk images has been created. It takes less than 30 minutes, depending on the speed of your system.

  You would need to make a new hard disk image from time to time, according to the Windows updates or other changes to your system. I usually do one at least every week, or more often if necessary.

  I use Acronis for that purpose, but there are several other very good programs that do the same thing as well.

• How can I wipe my drive and reload a new OS on my desktop

  How can I wipe my drive and reload a new OS on my desktop?

  Reboot with the command keys and R keys, use disk utility to erase the computer's internal drive and install a fresh OS.

  If you initially Lion among Apple's USB keys, you need to connect this drive, and then press Option after the reboot.

  (142468)

• What is SSD and how can I use it or not?

  Could someone tell me, what is SSD and how can I use it or not? because my friend told me that my laptop has SSD drive.

  Hi Jabbar73,

  Thanks for your post, I'm happy to help you.

  SSD stands for Solid State Drive. Here's the Wikipedia definition. SSD drive.

  Now, for what is in your system go to the Start button and click on run

  Type msinfo32 , and go to the section components storage disc.

  Lists the disks that you have in your system.

• How can I get a driver for my Laser Jet CP1525nw Maverics?

  How can I get a driver for my Laser Jet CP1525nw Maverics?

  Hello

  Please check the following first:

  http://support.HP.com/us-en/document/c03967522

  Then use the following driver:

  http://FTP.HP.com/pub/softlib/software12/COL51995/LJ-125717-1/HP-LaserJet-SW-OSX-Mavericks_v12.34.60.dmg

  Kind regards.

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)