How can my child get around the parental control of Microsoft?

Similar Questions

• How can I block downloads using the parental control?

  Original title: parental help

  Hello, I'm going to set up the parameters of family on a computer to my mother and I want to block downloads with a password, not a complete block. Anybode help me?

  Hey Nick,

  Thanks for posting your question in the Microsoft Community.

  The description of the problem, it seems that you want to know how to set the security setting family to block downloads with a password and not a complete block.

  I'll help you fix the problem.

  Follow the steps in the links below and check the issue.

  Protect your kids with parental controls:

  http://Windows.Microsoft.com/en-CA/Windows7/protecting-your-kids-with-family-safety

   

  Four things you can do to help protect children online:

  http://www.Microsoft.com/security/family-safety/childsafety-steps.aspx

   

  For reference:

   

  Parental control:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

   

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• How to get around the parental control?

  XXXXXXX

  CM

  Legally we cannot help you to work around your security moms. I'm pretty sure that your teacher didn't you give a try today that holds today.  You could have asked your mother before and not been in this situation

• How can a child navigatorContent access its parent?

  I have 1 mx:ViewStack with 3 children s:NavigatorContent inside.

  Ho can I get access to the child element (NavigatorContent) property SelectedIndex of the parent (ViewStack)?

  I tried event.target.parent.parent.myViewStackid.selectedIndex = 1 but never succeed.

  [using Flash Builder 4beta2]

  Thank you very much

  Hello

  Yes disatching an event is the way to go.  Here's the same example with this extra.

  Heres the Hotel component

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/halo" width = "400" height = "300" >

  protected function editButton_clickHandler(event:MouseEvent):void

  {

  dispatchEvent (new Event ('myButtonClick'));

  }

  ]]>

  [Event (name = "myButtonClick" type = "flash.events.Event")]

  You can see the sent button event handler and event called myButtonClick.  Notice the tag .  This tells the compiler to flex what we call this event and the type of event it is.  Otherwise said, he will expose in mxml and you can listen to it in the main file.

  This is the main file

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  "xmlns:MX ="library://ns.adobe.com/flex/halo"minWidth ="1024"minHeight ="768"xmlns:local =" * ">

  protected function hotelcomp1_myClickHandler(event:Event):void

  {

  viewstack1. SelectedIndex = 0;

  }

  ]]>

  You can see here now in the viewstack in the mxml hotelComp that I have listed for the myButtonClick exactly as I would any other event and it called the hotel1Comp_myClickHandler that defines the index selected to 0.

  Hope that is kind to you.

  Andrew

• Cannot add child account to the parental control

  No matter how many times I add my child account to watch safely from the family, it does not work. The account appears in the list of monitored accounts and has the correct options I selected via the Family Safety however website when my child connects his account said "this account is not monitored by parental control.

  I deleted the computer AND the child of the Family Safety options site. I uninstalled and reinstalled parental control over the child's laptop computer but the account is STILL without oversight and shows via the control panel in Windows 7.

  When I log on the site of Family Safety on that account child watch the monitored account as 'white' "computername" when "in white" should be the account on the laptop.

  I am a computer professional and cannot understand it. What other options do I have?

  ANSWER FOUND!

  I found the answer on a long search of these forums...

  I had this problem because the computer name was the same as the name of my child's account. I changed the name of the computer to another one of his account on the computer and I was able to successfully activate Parental controls through parental controls on the computer.

• Remove the parental control of Microsoft

  I gave Microsoft Family Safety.  I DELETED all my accounts weeks.  WHY don't Microsoft family safety still limited screen time?  What can I do to really remove my Windows 7 computer?

  Thank you.

  Hello Ann,.

  Thanks for posting your query in Microsoft Community.

  To disable or stop using family characteristics, that Microsoft provides, I'd once, check that you follow the correct steps. "I suggest you refer to the section:" ","for Windows 7 or Windows Vista Family Safety Essentials Windows: uninstall parental controls" in the following article, and the check, if it helps.

  How can I disable the family characteristics?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How can I make reference to the parent object of a checkbox?

  I have a checkbox called P105_CBX, with 10 boxes. I have an onClick = "RunThisFunction (this) ' in the attributes of elements in HTML form for this object." When I click on one of the boxes, this function is triggered. An alert at the top of this function tells me that the argument passed to this function is something like P105_CBX_2, which indicates how box has been checked.
  
  I would LIKE to pass just the name parent of the object checkbox, P105_CBX, as the argument to this function, instead of the name of the box that was checked and I cannot quite understand how. I tried arguments such as this.container this.parentNode, this.parent, this.parents (), this.closest ('ul') and I've yet to find the magic word. After two hours of searching on Google, I'm turning to the experts.
  
  Thank you!
  
  Published by: Mark T. 17 March 2012 09:14

  Hello

  I couldn't reproduce your behavior. Maybe this is related to your prob? http://seanmonstar.com/post/707125202/parentNode-misbehavior-in-IE, but more likely, you have already seen it.

  In your code, you may also like to try the function $x_UpTill: http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/javascript_api.htm#CHDEGGGI

  function RunThisFunction (cbx) {}
  Alert ($x_UpTill(cbx,_'FIELDSET').id);
  }

• How can I make reference to the parent, without using _parent or _root?

  I can't use the following in my ActionScript because of conflicts with the host application:

  _level0

  _root

  _parent references

  A pop-up window I have a button closure with an absolute reference:
  closeBtn.onRelease = function () {}

  unloadMovie ("_level0. Page_1.holderBox");

  }
  Is there another way to do this job without use _level0 or _parent?
  I read that it is possible to use a global variable on the main timeline and ref, but cannot get that to work.

  You may need to try several different approaches (it's what I would do), but you may be able to target just the owner directly using the variable global and not necessary to include the reference Page_1 with her...

  section 1:

  _Global.mcVar = null;

  later...

  _level0. Page_1.imgholder.image0_0.boxS.onRelease = function() {}

  createEmptyMovieClip ("holderBox", getNextHighestDepth ());

  holderBox.attachMovie ("boxSound", "boxSound_mc", 0);

  _Global.mcVar = holderBox;

  };

  If this does not work, try to move in after every time holderBox is added in Page_1 and include Page_1 in the assignment as I showed earlier.

• I can't 'add files' in the source control Explorer microsoft vsts

  I can't add files using option buttons more. I tried to repair VSTS/remove and add VSTS, nothing works.

  Hello

  The question you have posted is better suited to the MSDN Community. Please post your query in the link next to the support of the MSDN forum for further assistance.

  Visual Studio vNext MSDN Forum

• My child allows to bypass the parental control

  My child to bypass the parental control on his Macbook Air using the method presented in this video tutorial. Is there a way to avoid this? https://www.YouTube.com/watch?v=Br6wKR28jFo

  With the text of the video section, the way used by the author to exploit the single user Mode

  command line is specified; and it has been done before. Don't know if there are more recent methods

  to try to deter the child since the creation of their own Admin account to bypass the controls that

  those already discussed adjacent older sons, like this:

  How to stop a person setting up an administrative account duplicate (hackmac)?

  Although it is possible to learn how and use the Open Firmware password, to attempt to get the Admin acct

  This could also be overcome by a particular person looking to exploit a work around physical access.

  In the past, some computer models were easier to open and to perform tasks that could derail this method.

  Almost any iFixit or removable guide could be useful for a particular child or student, as a work-around.

  See suggestions on how to apply the Firmware password, as well as the means to

  block access to the material or the way to reset the admin by OS X Recovery password, in news

  OS X versions that use this partition and its utilities. It is part of the problem with the Admin

  operation, the user is physical access to the computer. And why remotely hacking is very difficult.

  • Use a password of the firmware on your Mac - Apple Support

  While I have no other suggestion (knowing that there could be a fairly simple method to work around the)

  and most have been published online for several years) I hope that someone will see & respond to your

  question with any method you can implement. Or see if an Apple Store genius bar can help you

  This question, because it creates problems. I'd be sure to make an appointment to discuss this at the store.

  If no official Apple retail Store is available, you should perhaps consider a call to Apple support or use a

  online chat. Don't forget to mention details about the build year computer, etc. & the version OS X in it.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  You can choose to make submissions directly to Apple's comments on this issue, if you find that it is not effective

  method of maintenance determined children or young adults to change their own Admin computer.

  One of the comments below links is probably more suited to this topic than the other:

  • Support Feedback

  • Products return

  Contact Apple support

  http://www.Apple.com/contact/

  Need service or support? Start your online application and we will find a solution.

  More ways to get help:

  • Contact iTunes Store support
  • U.S. iPod, Mac and iPad technical support: (800) APL - care (800-275-2273)
  • Technical support for iPhone in the United States: (800) MY-IPHONE (800-694-7466)
  • See all phone numbers around the world

  Since there is no response when I first noticed your thread, I asked guests move it more appropriate

  location for visibility in these discussions of support; so they chose to put it in the section of MacBook Air.

  Good luck in this case!

• need to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista

  you want to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista. I have 3 accounts going 2 for children and one for the parents/administrator. I found ophcrack in several places on the computer. any help would be greatly appreciated

  The only question the idea of Malkeleah, that is when you put a password on BIOS, all you need to do is pop the battery from the motherboard and the password is gone. Faronics has in some programs such as anti-executable and a few other programs that may block the name or ID of a process and prevent it from running (some antiviruses have that option, such as Avast, but usually is a pain in the ass to configure)

• How can I get around the screen of the user account?

  Original title: bypass the restore to the starting point

  Hello, recently, I chose to use the system restore and everything seems fine, except at the beginning: W7 boot computer and be ready to go.

  Now, computer displays a screen showing as the only user and I must press the space bar to get to W7
  How can I fix to bypass the screen of the user?
  (I'm talking the same screen you get when your computer was asleep and you open the lid to wake up).
  Thank you.
  Jmont_rose

  Hi Jmont_rose,

  Welcome to the Microsoft community. According to the description you want to bypass the login screen of the user.

  ·         You want to bypass the login screen and go directly to the desktop?

  If so, I suggest you follow these steps:

  (a) press Windows Key + R.

  (b) type control userpasswords2 in execution prompt and press enter.

  (c) uncheck users must enter a user name and password to use this computer.

  (d) click on apply.

  (e) enter your user name and password. Click OK two times.

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• How can I get the parental control?

  I want to set up parental controls, but when I go into my control panel find the sound icon is not there and I went looking and looking but nothing came.

  Windows XP is not the Parental control.  This feature has been added in Windows Vista.

  XP can use Internet Explorer Content Advisor and allows to control the time that users can connect to.

• How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document?

  How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."

  The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)

  My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.

  -Dov

  PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!

• I usually get hyperlinks have advertising, the "moms make money at home? How can one, I get rid of this browser bug?

  I usually get hyperlinks have advertising, the "moms make money at home? How can one, I get rid of this browser bug?
  I downloaded, install and scan with Malwarebytes Anti-Malware laptop several times and it of better, but is still hyper-lier words, with the announcement that the link
  Any suggestions?

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked