How coordinate values to change the rotation?

Similar Questions

• Please tell me how do to permanently change the date of a file "update"

  Please tell me how do to permanently change the date of a file "update". The file is a JPG image copied from a digital camera. After that I rotate image his 'Date Modified' goes from January 20, 2011 to September 1, 2011. As a result of the date change, the image no longer appears in the correct position when the directory is sorted. I have a program that creates a file HTML images. The software sorts images according to their creation date. The bad images appear at the end of the table.

  Date manipulation attributes of a file can be done directly through the graphical interface of Windows.  There are, however, various third party utilities that have this capability.

  This article has a good discussion on the topic and includes links to some public services.  The article is quite old, however, and I don't check to see if the links are still valid.  If not, you should be able to find something useful here: http://www.google.com/#sclient=psy&hl=en&source=hp&q=edit+file+accessed+date&pbx=1&oq=edit+file+accessed+date&aq=f&aqi=&aql=&gs_sm=e&gs_upl=1857l7979l0l8482l23l23l0l2l2l0l267l4165l0.10.11l21l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649

• How can I permanently change the NVIDIA geforce of Intel(r) hd graphics?

  I would like to know how can I permanently change the type of adapter display card Intel (R) NVIDIA geforce hd? Previously, when I bought my computer, it is equipped with one chart type-NVIDIA geforce and everything goes fine until I installed Intel(r) hd as you are prompted by windows update. Since then, my computer have encountered many problems, especially when you play high graphics... I tried to move from the graphics card Intel (R) NVIDIA geforce hd when playing games... and yet, the performance is not as good as the last time where I did have only one chart. Because of this, I would like to change or define main graphic geforce NVIDIA and Intel (R) hd as secondary, or if possible, permanently remove the hd Intel (R).

  Hello

  What is the make and model of computer?

  What is the Windows operating system?

  Follow these steps to disable Intel

  http://www.WikiHow.com/disable-the-onboard-graphics-and-install-a-new-graphics-card-in-your-HP-Pavilion-6630

  HP Support Doc

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01684404&tmp_task=useCategory&LC=en&DLC=en&cc=us&product=4215700&lang=en

• I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  Trying to convert to the. WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• How do I dynamically change the the number of vCPU and amount of a virtual computer memory?

  Hi all

  My first question is how do I dynamically change the number of vCPU and amount of a computer virtual memory when the virtual machine is running? If so, this may be achieved by writing a few scrpits to inform the hypervisor?

  My second question is, I can start a virtual machine in KVM with the number of vCPUs and amount of memory configured in the startup script. I don't know if this is supported in vmware ESXi?

  I couldn't find the answer in the ESXi 5.0 user guide.

  Your suggestion will be highly appreciated.

  Cheng Wang

  http://sparrowangelstechnology.blogspot.com/2012/11/hot-add-of-CPU-and-memory-to-virtual.html

  You can change the ram and the CPU, but it must be enabled.

  by default, only it isn't.

  See this link to change the settings of vm via powercli

  http://ICT-freak.nl/2010/05/07/PowerCLI-script-to-schedule-memory-and-or-vCPU-updowngrade/

• How can tag_browsepanel, we change the order of {hideOnSale, hideSubCatalogues, tag_browsepanel, hidePriceBrackets}

  How can {tag_browsepanel, hideOnSale, hidePriceBrackets, hideSubCatalogues}, we change the order of {hideOnSale, hideSubCatalogues, tag_browsepanel, hidePriceBrackets} and how to manage and change the price supports?

  Price brackets are controlled on the catalogues themselves - go inside and look at options any more of them.

• How can I add change the color of background/first plan the Configurator?

  How can I add change the color of background/first plan the Configurator?

  No matter if you mean the Configurator application or a panel created with Configurator, you would probably have to post the question on the Configurator Forum.

  Configurator

• How to update day/change the value stored in a file XML with AS3

  I have the following xml file...

  <Customers>
     <Email address="[email protected]">
          <FName>joe</FName>
          <Surname>bloggs</Surname>
          <DayBirth>02</DayBirth>
          <MonthBirth>01</MonthBirth>
          <YearBirth>1981</YearBirth>
          <House>2</House>
          <Address1>Johns Street</Address1>
          <Address2>Trekville</Address2>     
          <City>Timbuktoo</City>
          <PostCode>CF67TH</PostCode>
          <Gender>Male</Gender>
     </Email>

       <Email address="[email protected]">
          <FName>fred</FName>
          <Surname>bloggs</Surname>
          <DayBirth>03</DayBirth>
          <MonthBirth>02</MonthBirth>
          <YearBirth>1982</YearBirth>
          <House>22</House>
          <Address1>Johns Street</Address1>
          <Address2>Fredville</Address2>
          <City>Cardiff</City>
          <PostCode>CF71TH</PostCode>
          <Gender>Male</Gender>
     </Email>
</Customers>

  
  

  I loaded the XMLfile in my flash site and I am able to filter by the email address and display the corresponding data. Code below...

  var custXML:XMLList;

  var xmlCustLoader:URLLoader = new URLLoader();

  xmlCustLoader.load (new URLRequest ("Customers.xml"));

  xmlCustLoader.addEventListener (Event.COMPLETE, custXMLLoaded);

  function custXMLLoaded(e:Event):void {}

  xmlCustLoader.removeEventListener (Event.COMPLETE, custXMLLoaded);

  load xml in object custXML data

  custXML = new XMLList (e.target.data);

  run the analysis function

  ParseCustomer (custXML);

  }

  function ParseCustomer(customerInput:XMLList):void {}

  trace ("Output XML");

  trace("------------------------");

  var custAtts:XMLList = customerInput.Email. (@address is entEmail;)

  for each {(var custEmail:XML in custAtts)

  trace (custEmail);

  }

  set variables for the filtered result

  entFName = customerInput.Email. (@address is entEmail). FName;

  entSurname = customerInput.Email. (@address is entEmail). Family name;

  entDay = customerInput.Email. (@address is entEmail). DayBirth;

  entMonth = customerInput.Email. (@address is entEmail). MonthBirth;

  entYear = customerInput.Email. (@address is entEmail). YearBirth;

  entHouse = customerInput.Email. (@address is entEmail). House;

  entAdd1 = customerInput.Email. (@address is entEmail). Address1;

  entAdd2 = customerInput.Email. (@address is entEmail). Address2;

  entCity = customerInput.Email. (@address is entEmail). City;

  entPCode = customerInput.Email. (@address is entEmail). Postal code;

  entGender = customerInput.Email. (@address is entEmail). Gender;

  }

  Now, I want to edit a record in this file (for example, change the < FName > Fred to say Paul and save the changes to the Customers.xml.) How can I do this?

  It's because you're not assign the name of the film, time, etc. and I only showed how to solve the problem you asked originally.

  now, ask yourself a different (but related) question.  Here is the solution:

  seat of the var: int;

  var chosenSeat:String;

  b.addEventListener (MouseEvent.CLICK, seat1Click);

  function seat1Click(event:MouseEvent):void {}

  seat = 1;

  set the chosenSeat to the name of the XML tag Seat1 - this will be used to record

  chosenSeat = "Seat1;

  instead of hard-coding these channels, they should be attributed using comboboxes or something else.

  UpdateBooking (bookXML, chosenSeat, seat, "St Davids", "300: Empire builders", "Tuesday", "18:00");

  }

  function UpdateBooking(xml:XML,chosenSeat:String,seat:int,room_name:String,movie_title:String,day__name:String,showing_time:String):void {}

  XML. room. (@name is room_name). Film. (@title is movie_title). Day. (@name is day_name). Display. (@t ime is showing_time) [chosenSeat] = seat;

  }

• How can Hi I change the default search engine in firefox android? Largely, I would prefer to use something other than google. The previous method does not work

  greetings...

  How can I change the default search engine in Firefox android at https://duckduckgo.com? The previous instructions to change the default search no longer work. the key word in string. URL no longer exists and after add and enter a value of https://duckduckgo.com/?q= he always default to a Google search. Go figure when the only room I can get Firefox for Android it the Google game store.

  Hello eyeb1, please visit www.ghacks.net/2013/08/07/firefox-23-for-android-launches-with-custom-search-engine-support-and-rss-feed-support/

• How can I programmatically change the parameters of voltage range in a DAQ Assistant

  Hello

  First post here.

  I need to be able to change the properties of voltage range of a daqmx assistant DAQ based on user input.  My material, an SCXI module - 1102C does not change this property on a running task, so I would together the range of input voltage analog before activating the DAQ Assistant, or break the DAQ Assistant immediately after it starts, set the values, and then resume.

  I don't know how to change the task ahead because the DAQ assistant creates the task when it is running, and there is no job before that.

  In the attached photo, I have a conditional section, configured to run only if the loop iteration is 0.  I take the task of the Daq assistant, sending him stop vi of task, set the property and then send the task with the snap the vi task. I can watch him run with lightweight debugging on, and everything seems to work properly, but on the second (and all others) iteration of the loop, I read I. Max and it seems that a re DAQ Assistant set it to the 5V.  You can see what's going wrong here?

  BTW, there is a continuous acquisition and the code doesn't produce error messages when executing.

  I've encountered a similar question someone posted here in 2006, but his question was specifically a Labview API (VB, I think) and not a real solution of G.

  Attached are the real vi in question and a PNG of the block diagram.

  Thank you!

  Ruby K

  First of all, if you want to start getting beyond the basics with the DAQ hardware, you have to stop using the DAQ assistant and do it with lower level VI DAQmx.  There are hundreds of examples in the finder of the example.  You can even make a right-click on the DAQ assistant and select open front panel.  This will create a Subvi, you can open and see what is happening behind the scenes.  Do it.  I think you will find that the task DAQ is recreated on each (although I'm not 100 percent the way parameters are established or maintained in each section of this sub - VI).

  The second problem is that you have a bit of a race on iteration 0 condition.  These two property DAQ nodes are running at the same time.  Thus, when you read the AI. Max, this can happen before or after the AI. Max is located in the structure of your business.

  Thirdly, make sure that involve you your son of the error.

• How can I PERMANENTLY change the default printer to Adobe PDF files using my physical printer instead of SIMPLY printing a pdf in a new PDF file?

  Whenever I restart Adobe Reader DC default printer is automatically reset to print any PDF file to the "print to PDF file" as the default printer.  How can I change the "default printer" always default to be my physical default printer, instead of "print of PDF?»»»

  PRINTING a document which is already a pdf file to a pdf file is absolutely ridiculous and stupid for the following reasons:

  1. If you want to save a document that is already a pdf in different PDF file, you can use the function "Save as" in the file menu.
  2. If the user select "Print" to PRINT a file they ther NOT try to SAVE a file.  (We'll give credit to the average user to understand the difference between PRINTING and SAVING of a document).
  3. Most of the users do not need to duplicate the storage of a document on their drives to computer
  4. Users of mobile devices, by the fact that they have already downloaded the PDF file have already used storage space of EXTREMELY valuable and LIMITED memory with the download of origin and most certainly so NOT to use more than this space such a resource limited printing!

  As an engineer, hardware and software for the past 40 + years to really understand the value of making easy allow the end user to change the configuration of something as simple as the setting for the default printing device to use!

  For the record, I searched the online help as well as the forum Adobe Reader community for a thread that explains how to change the printer by default so that whenever I starts the Adobe service it will automatically use the printer default physical connected to my computer to "PRINT" any PDF document.  If I missed something that deals with this problem please point me about it, if no such band rolling exists, then please tell me before making this change.

  Thank you for your help in this matter!

  Sincerely,

  Larry A. Coates

  Hi larryc57256426,

  You can set your default printer following the steps mentioned in this document KB change the default system printer.

  Check in the print dialog box, you have unchecked "print to file" under "Advanced settings."

  Kind regards
  Nicos

• How do I dynamically change the query VO

  Hello
  
  IAM trying to change the VO query dynamically. My forced, it is that I have 6 columns in a page header 3 columns (single default) for objective sort and another 3 columns (the default one) for querying data.
  
  Al, are in a single view so I created a VO.
  
  Sort of research
  AN A
  B B
  C C
  
  When I give all sort values and hit the query of VO submit button should change dynamically.
  I searched old post in this regard.
  
  My query is something like that
  
  SELECT * from cust_table where a = NVL (: 1, a)
  UNION
  SELECT * from cust_table where a <>NVL (: 1, a)
  order by one
  
  IAM not trying the Sub part dynamicaly in my AM method
  vo.setWherecaluse ("where a = NVL (: 1, a)")
  UNION
  SELECT * from cust_table where a <>NVL (: 1, a)
  order by one ").
  and trying to pass parameters to the query. But it does not work. In error "variable binding is not found.
  
  The one you suggest how to solve the problem.
  
  
  Thank you
  Mahesh

  Mahesh

  Please let me know the logic behind the union of the same query with it. What is the problem you are having with
  vo.setWhereClause

  Thank you
  AJ

• How to find or change the voltage setting set in a series of HP TouchSmart IQ500

  How do I find or change the voltage setting set in a series of HP TouchSmart IQ500 (specifically an IQ524)

  It does not use an external power adapter? If so, all you need to use in another country is an adpater sheet to match the wall outlet.

• How can I dynamically change the scale of an AIChannel, while the task is running?

  I would like to change the scale of an AIChannel while the task is running.

  Is this possible? How can I do?

  Hi Michael,

  I don't think that this is possible.  If you need this capability, I would acquire the raw tension and applying your own scaling on the set of data as being treatment.

  Kind regards

• How to prgrammatically to change the background color of a 'number' inside a cluster control

  Hello

  using a property node, it is possible to change the background color of a control number.

  But how to do this, if this number control is inside a cluster? I would not have found the property to the background color (see attached vi).

  Thank you very much and best regads.

  Michael

  P.S.: I use a reference, because the color change must run inside a Subvi.

  Hi Michael,

  Insert a function "to the more specific" and connect the digital constant refnum. I modified a bit your vi.

  See attachment.

  Mike