How copy a dvd burned on my computer so I can burn it again?

Similar Questions

• How much of my data to my computer Windows Xp can I convert an Apple computer

  How much of my data to my computer Windows Xp can I convert an Apple computer.  Will it take all new programs (software)?

  As the software will, Yes, you will need software almost entirely new.

  If you have installed your software to check disk (cd or dvd) of your software box came in. It will say if it is Mac compatible. Some discs of software include installers for Windows and Mac computers.

  The good news is that a lot of software that you are familiar with the use of Windows is a Mac version that you can buy. For the instance of Microsoft office - you can buy a Mac version of the software and will be able to open your existing Word, Excel, files etc. that you have on your XP computer.

  So far as photo/image files, PDF files and other common files of format you have on your XP computer, you will be able to open these files very well on a Mac.

  Good luck on your switch. As a recent PC to Mac converter, I don't know if anybody somewhat a challenge. But I found it's worth!

• How to remove all information from the computer so I can sell it?

  How to remove all information from the computer so I can sell it?

  Hello

  You will want to format the hard disk:

  1. you can use DBAN - http://www.dban.org/

  or

  2. you can follow this tutorial to clean install up to the step where you format the disk, in which you would then STOP (because you just want to get rid of the files on the hard drive, do not install Windows) - http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html

  Kind regards

  Patrick

• Satellite 5200 801: how to replace DVD burning drive?

  Hello
  A few days ago, I decided to replace my CD/DVD burning drive (burn DVD at 1 x) with a more faster and more modern.
  The problem is that, while turning on my laptop, it stops without any error message, as if she could not recognize the hard drive, so there is no professional Windows startup (problem of configuration master / slave?).
  I tried with two different burning drives and I also upgraded the BIOS of the laptop to version 1.40 (date 17/04/2003), but there was no result.
  Help me thanks
  Riccardo - Lecce - ITALY (South)

  You guessed it right,

  It's a question of master/slave/CS.
  Find out your old drive (firmware DI has something like 170) and try to locate the sense of them (current setting of M/S/CS) of it through the Internet on specific DVD player forums.

  Then determine WHAT type of disc, you will need to buy to make it work on your computer (or find the firmware suitable for do this... you'll need a different laptop that DOESN'T RECOGNIZE the DVD drive in the State, it is now).

  DVD Slimline portable computer readers usually do not come with a rider to make this adjustment (M/S/CS) on your own but are set with the internal firmware for this. There are other ways on how to get it to work (to force a shortcut on the back of the card), but I would not go for it if I were you.

  Concerning
  chain

• video copied to DVD does not match project that I can see

  Good,

  No doubt another basic question, but I can't find an answer in the Adobe manual. I just discovered (after burning 8 copies of the same file) that the film on the DVD does not match what I see on the screen of project. The drop-down list to organize > project resembles what I want except that he seems to have the original avi file that I edited later as well as the changed file. The timeline seems correct. The timeline seems correct. I tried to eliminate the 'markers', but there was none to remove - the drop down menu gave me the ability to add markers. A Council, is that the DVD is picking up a model of menu that I played with, but could not get to work and then deleted. I ended up using the title screen very basic with black video in the high title of range drop-down list menu rather than the option model to change. I see the new title in the scene and timelines. Yet once the previous question just posted, I don't see anything in the screen clip
  (e.g., boxes of th) under 'organize '. In addition, the video clip on the DVD appears truncated by about half of playing time.

  At one point I have only the old menu design clip shows just below the montor screen could display but could not know how to remove.

  THX

  Yes, I want to.

  To preview your created disc, click the Preview button on the monitor of the disk layout.

• How do what has been on my computer out of it and start again on windows and my computer runs faster it is really slow runing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs, you experience problems withi want to start my computer arase evrything cool then restart windows as when I bought the computer
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you really want to delete "all" of your computer, you must (a) execute any system recovery was provided by your computer manufacturer to restore the computer to its factory costs State or (b) do a clean install of Windows.

  Doing a clean install of Windows is a fairly drastic (and often unnecessary) step.  Don't forget that if you are doing a new installation, you need to reinstall applications that you may have, for example, Microsoft Word, Excel, etc. You will also need the appropriate drivers for your hardware.  Maybe a driver CD was provided with the purchase of the computer or you may have to download the drivers (before we do to reinstall it) from the web site of the manufacturer of the computer or the manufacturers of various components.

  http://michaelstevenstech.com/cleanxpinstall.html

  http://www.theeldergeek.com/clean_installation_of_windows_xp.htm

  Making a recovery of the plant is only a little less drastic than a clean install.  If you have and take the option to perform a recovery of the plant, will be again loaded applications that were previously loaded on the computer when you bought it, but any application that you have installed later will have to be reinstalled.

  In both cases, you will need to restore from external backup all of your data (documents, music, photos, etc.).

  If you are unsure whether or not the option (a) is available, identify the make and model of your computer.  (B) is only available if you have a real (with hologram) Windows XP installation CD.

• How to change the settings on the computer so I can read the fonts adobe photoshop on Windows 8?

  Police is size 2 - Impossible to read, display in the Panel settings do not change the Adobe applications and other applications?

  Hello

  
  Let start with a question.
  The question is limited to Adobe Photoshop?
   
  
  If it is only with adobe Photoshop you will need to change the settings in Photoshop and check.
  I suggest that post you the same question in the adobe community to improve assistance.
  Check out the link and your question bouquet
  http://forums.Adobe.com/community/Photoshop
   
  
  Reference: http://help.adobe.com/en_US/photoshop/cs/using/WSECD532BA-A34D-494b-BF39-8A583667413Ca.html
  
  Hope the above information helps.

• How to create DVDs from recovery to a different language?

  With windows 7 64 bit, I bought Satellite 655 - 149 Turkish, I would install windows XP Russian. How to create DVD disk with drivers?

  This can be done. You can create the recovery on the language of origin (preloaded) only disk.

  If you want to use Russian Win7 you install it using the Microsoft Win7 installation disc (Russian language) and later to install any drivers, tools and utilities for the Toshiba download page - http://eu.computers.toshiba-europe.com

• How to copy a dvd I made to my computer

  I recorded my ultrasound on a dvd and you want to send by e-mail. How can I transfer ot to my computer so I can send it and not just play?

  You can copy the files from the DVD as follows:

  Insert the DVD into your DVD drive... If AutoPlay or
  Launch of Windows Media Player... just close them.

  Now... to... Start / computer... a click right on the
  icon for the DVD player is in and choose...
  Open or explore... it allows to display the directory
  the DVD.

  You can copy and paste or drag and drop the content
  the DVD from there to a folder on your hard drive
  drive.

  I was wondering... is this a video DVD that will play
  in a free-standing DVD player or is it a data DVD
  you did for backup purposes?

• How do I restore my CD/DVD burner on my computer, I think that the registry is missing or incorrect? IWAS via iTunes but says that values are missing

  Windows Vista Home Premium with engraver of CD/DVD to iTunes

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to copy a DVD with a DVD-R/W laptop?

  I have a laptop with a DVD-R/W. How to copy a DVD? I am puzzled, if I FIRST have to 'Save' DVD-content somewhere and then REMOVE the DVD and insert a blank DVD to burn. Please give directions to the not so computer expert. Thank you

  You must save a temporary copy of the disk on a hard disk of the computer.  Burning software more it will do it automatically for you.  As the same disk drive, select the source and the destination.

• How burncopy a DVD with one burner

  I have a computer with Windows Vista and a DVD burner. I would like to copy a DVD I have. I need to learn what to do so that I can share some important information with my neighbors. How can I do this?

  Hello

  You can copy the files from the DVD to a folder on the computer and then burn it to a blank DVD or use ImgBurn to create a .iso from the original DVD, then burn to a new DVD, if it's a commercial film DVD, you won't be able to create the .iso image file.

  http://www.7tutorials.com/how-copy-disc-CD-DVD-or-Blu-ray-Windows

  ImgBurn (link included above) has Guides on burning DVDs

• I need to install a cd of the preliminary hearing to my computer so I can burn on another cd. How do I do that?

  I have a preliminary inquiry on the cd I need to install on my computer so I can turn around and burn a copy on a cd again. How do I do that?

  Hello

  Copy the contents of the CD to your hard drive, then copy this back on a CD.

  Use start - computer or Windows Explorer to a folder to copy the CD and then go to the
  CD and right click on each thing in the root folder of the disk and the COPY. Back to the created folder
  Double click on it if you are next to the folder, and then in the right pane, right CLICK and PASTE.

  Close all programs - put in a CD - R or CD/RW and make a copy of data.

  Hello

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx

  How to burn a CD with Vista
  http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/

  Burn a CD or DVD in Windows Vista
  http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/

  Microsoft video - how to burn CD/DVD
  http://www.YouTube.com/watch?v=0BwF60m05m8

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to convert a video from iPhone to a DVD burner

  How to convert a video from iPhone to a DVD burner

  ?

  What, exactly, you try to do? What kind of computer do you have?

  ~ Lyssa

• My windows media player does not recognize that I have a cd/dvd burner installed how do I corredt this?

  I'm trying to burn pictures on a dvd with windows media center and I get a message saying "install a burner and try again. I have a burner and have used it in the past so I don't know what the problem

  Hello

  1. have you made changes on the computer before this problem?
  2. which version of the Windows operating system is installed on your computer?
  3. what version of Windows media center do you currently use?
  4. are you able to use the DVD writer normally with other applications?

  Try the following and see if it helps.

  Method 1:

  Make sure that the CD/DVD burner is properly connected to the computer.
  a. If you are using an external CD/DVD recorder, connect the CD/DVD burner to the computer.
  b. plug in the cabin of the power supply and check if the power light is on.
  c. install the burning software. Insert the CD, a program will pop up and you guide through the installation process. Usually it let you name your drive, tell you when connect you your external CD/DVD burner to your computer via USB, and update the software for your external CD/DVD burner.
  d. check if you are able to burn CD/DVDs.

  Method 2:

  Delete the temporary folder burn Cache and check if it helps.

  Follow the steps below:
  (a) click Start, select computer.
  (b) now go to sub lease:

  File Burn \AppData\Local\Microsoft\Windows\Burn\Temporary C:\Users\ (Username)

  (c) delete the files at the location above.
  (d) restart your computer and check if that helps.

  Method 3:

  Uninstall any third-party CD/DVD burning software installed on your computer and then burn the DVD and check if that helps.
  How to uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Method 4:

  Run the fixit for the following Microsoft fixit and if that helps.
  Your CD or DVD drive cannot read or write media: http://support.microsoft.com/mats/cd_dvd_drive_problems/

  Method 5:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Center-frequently-asked-questions