Satellite L500-1WG WLAN WNAP A-Link connection gives 'blue screen '.

Similar Questions

• Satellite L500 - 1WG PSLS0E - impossible to reconnect wireless

  * Computer info: *.
  Satellite L500-1WG - Partnummer: PSLS0E-07502EN5

  Windows 7 Home Premium

  The drivers are up to date:
  -Microsoft Virtual WiFi Miniport Adapter version - date driver 21.06.2006 - 6.1.7600.16385
  -Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC - 30.07.2010 driver date version - 2017.2.730.2010
  -Realtek PCIe FE Family Controller - 23.06.2010 - version 7.23.623.2010 driver date
  I disabled the "allow the computer to turn off this device to save power" for all 3 of them.

  * Problem: *.
  When I start the pc, it connects to my wireless router as usual, but then after that 30-60 minutes it stops working. He always finds the wireless router and the signal is excellent (4-5 bars), but when I try to connect it gives me the error message that it is impossible to connect to my router.

  If I restart the PC, it is always impossible to connect.

  But if I turn the computer completely off and leave it for a while, it works when I start it again, which suggests that he may need to cool (we noticed that the computer is warm enough, and that the fan is spinning a lot... but that could have been the same before - just that we it has not noticed that it was not a problem)

  ... But if I only it hibernates and let it cool for a while, it does not work to reconnect when I start again.

  I did a test earlier: I started the computer and made sure the wireless connected - then I put into hibernation and he did it again, and after that, he was still unable to connect. Then I stopped had and turned on the right now - and then it works fine.

  It's the same question at the local library, but my in-laws it worked fine for 2-3 hours the other day.

  My other pc that runs on Ubuntu, works without problems on our wireless.

  Any ideas?
  -Is it a virus?
  - Or my card network is not able to take the heat (material)?
  - Or is this a bug of Windows/driver (software)?

  I plan to reinstall windows, but before crossing with whom I was wondering if it's worth the hassle... Is it a hardware error, and should I just go directly to the seller?

  What you can try is updated the BIOS. Latest version is installed on your laptop?

  Another question: where you find WLAN driver version 2017.2.730.2010?
  Toshiba's latest version 2015.1.0427.2010?

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Satellite L500-1WG - black screen, turn on

  Hi all

  I am looking for some advice,
  I'm far from being a computer whizz but know my turn well enough. I put my model below.

  No apparent reason, I have the black screen.
  The laptop was working fine yesterday. Windows has shut down the computer automatically to install an update. Since the laptop this morning train, nothing.
  The power lights, flashing web cam, windows sound times.
  No courier. But nothing
  I can even enter my password and it is registered on. I tired to fix battery, but it did not work. Thanks in advance to all who wish to help!

  my model is
  Satellite L500-1WG
  Part number: PSLS0E-07501DEN

  Main features
  Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) and
  Genuine Windows 7 Home Premium 32-bit (pre-installed, Toshiba-HDD recovery)
  -Intel Pentium processor T4400
  -DVD - RW SuperMulti drive (Double Layer)
  -RAM (1066 MHZ) DDR3 4096 MB 2048 + 2048
  -39.6 cm 15.6 "TruBrite HD 1366 x 768 display high brightness with backlight LED with aspect ratio 16:9

  By pressing keys FN + F5 allows to switch between the internal and external screen.
  I recommend you connect the external monitor (or a LCD TV) and press the keys mentioned in order to verify if the external display will work properly.

  But I'm a bit confused... you said you were abele to enter the password...
  You see the field for the password?

• Satellite L500-1WG - Windows Media Player does not display my library

  Can anyone help?

  I have a Satellite L500-1WG, I ripped out the music in my music (the default setting), and it does not show in my media player library. I spent hours trying to figure this

  Hello

  I think you should check the settings of the Windows Media Player library. In Options > library, you can choose the files that need to be monitored. I think you should monitor the folder where you have added music.

  Check this box!

• Why the DVD jerky on my Toshiba Satellite L500 1WG?

  Images are missing when I play a DVD on my Toshiba Satellite L500 1WG.

  Make sure that the video driver is updated.

  What application you're using to play the DVD?

• When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equal

  When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equ

  . DMP files ar bellow:

  https://onedrive.live.com/?CID=BF931C2E054B2BA5&ID=BF931C2E054B2BA5%21105

  Original title: driver_irql_not_less_or_equal

  Accidents were not conclusive.

  BugCheck D1, {29, 2, 0, fffff880018b9f2a}

  Probably caused by: ndis.sys (ndis! ndisXlateReturnNetBufferListToPacket + 2 a).

  Follow-up: MachineOwner

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 0000000000000029, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
  Arg4: fffff880018b9f2a, address memory

  Debugging information:

  Update your network drivers, preferably from the support page of the manufacturer of your computer, which is strangely not available at this time. If you can't find a version update at Dell, try Realtek, linked below

  Identification information of the machine [of Smbios 2.3, DMIVersion 35, size = 2590]
  BiosVendor = Dell Inc.
  BiosVersion = A11
  BiosReleaseDate = 30/11/2006
  SystemManufacturer = Dell Inc.
  SystemProductName = OptiPlex GX520
  BaseBoardManufacturer = Dell Inc.
  BaseBoardProduct =
  BaseBoardVersion =

  OptiPlex GX520

  http://www.Dell.com/support/home/us/en/04/product-support/product/OptiPlex-GX520/drivers

  Note: This machine is pretty old and I see no driver support beyond Windows XP.

  Image path: \SystemRoot\system32\DRIVERS\Rtnic64.sys
  Image name: Rtnic64.sys
  Timestamp: Fri 30 mai 11:12: 23 2008 (48401957)

  Description of the driver: Realtek Ethernet NIC driver

  Driver update site: http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=10&level=3&Conn=2

• Cannot connect my Satellite L500-1WG to Wi - Fi router Netgear

  Hello

  I hope someone can help as Im pulling my hair out. Just replace an old Wireless ADSL router/modem to a "n" wireless Netgear DGND 3300 range Max Dual Band router ADSL. Everything is connected by ethernet to my Office PC Ok. Just bought a laptop L500-1WG with 'n.' compatible wireless card

  Hope to connect to the 802 1.1n 5 Ghz to speed things up and increase will however the laptop cannot find the adapter 2.4 Ghz 'G' and its driving me wild! Ive downloaded the latest drivers and checked in the device manager that "n" is selected. I messed around with the settings of the modem to the router and it seems to all be OK but can not connect, someone at - it ideas? Thought I would have the ability to connect via G or N...

  Your help is appreciated...

  And what is with the settings of the WLAN router? You are using auto option or you have assigned it N only?

• Satellite L500-1WG: network card works no - 31 code

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP ROUTER 3 G via an adapter (Intel 82567) without success.

  Under the general tab device manager says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) ». Then I updated driver-> Windows has determined the software driver for your device is up to date. Always the same message coming in general tab.

  Anyone have similar problems?

  Sitiper

  Hi mate

  This device doesn't work properly? Is - this WLan or LAN card?
  I m a bit confused but

  As far as I know the LAN and Wlan cell phone support for Realtek card.
  So, you can download the two drivers from Realtek page directly.

  Please set the BIOS to the default settings before you relocate for the two pilots.

  I hope this will help you!

• Satellite L500 - 19 X - HDMI to TV connection

  I am a beginner with it, wanting to watch iplayer on a larger screen. I have connected a Satellite L500-19 X theToshiba VGA cable to the TV - fine image, no sound, but I realize that an audio cable is required as well.

  I decided to try a connection HDMI cable instead, but I can't get it to work. The FN/F5 keys have four possibilities. I tried all the and had to do a restore of the system at any given time, because the PC kept close when I plugged the HDMI cable with one of the four choices.

  The TV (Finally, I tried two Sonys) is set to PC, but it does not recognize the device. Is - this drivers?

  Hello

  > The TV is set to PC, but it does not recognize the device
  Well, usually it s according to the TV but normally and on my TV, PC connection means the TV VGA input.

  If you use an HDMI cable, you have to select the HDMI port on your TV instead of PC port.

• Satellite L500-1ZP: inverted on the F6/F7 keys and screen brightness sliders

  On my satellite L500-1ZP, the brightness of the screen is reversed!

  So 100% brightness is totally blurred and 0% of brightness is entirely bright!

  "In terms satellite": level1 is full brightness and level8 is totally blurred.
  Also in the windows power options screen: 0% is its maximum intensity and 100% is dimmed.

  [Information on PC]
  Model name Satellite L500
  Part number PSLS9E-01X01CDU
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  BIOS Version 1.50
  Processor Intel (r) Core i3 CPU M 330 @ 2.13 GHz

  Hi mate

  To be honest, I've ever seen something like that
  Usually, the FN + F6 and Fn F7 function key should decrease and increase the brightness.
  I wonder why it does not work properly.

  Maybe it's a question of s an OS so you should recover the unit using the drive HARD recovery option.
  Press F8 when the laptop is turned on, and then select Repair my computer and then choose HARD drive recovery.
  The operating system would be installed again and you can check the brightness again!

  Otherwise, it could be a hardware problem as defective FL inverter...

• Laptop HP Pavilion dv7t after connection then blue screen display problem

  My phone displays the Windows 7 login screen very well.

  After I login, I see the desktop and icon and it flashes a couple times with a gray screen.

  Next, I get a blue screen and restart the computer.

  Any ideas?

  Hello

  The fact that it works well in Safe Mode, more points to a problem with the video chip.  Unfortunately the video card (called a card or a built-in chip) is physically soldered to the motherboard.

  That's what I would recommend.

  As you can access the safemode, make a copy of backup all your important files, etc.  Then try to reinstall the operating system or your discs recovery or Partition of HARD drive - if you still have the same problem, you could be quite certain that it is not software partner.  As I mentioned earlier, if you could possibly connect the laptop to an external display and you still get this problem, you could then be confident that the problem is with the video card - in this case, see the link below.  The page does not mention your particular model, but it can be useful in communicating with the guys.

  http://CGI.eBay.com/HP-DV2000-dv6000-DV9000-tx1000-laptop-no-video-repair-/260674058980?PT=LH_DefaultDomain_0&hash=item3cb1627ae4

  Kind regards

  DP - K

• Satellite L500-12F - WLAN speed drops down

  Hello

  I have the troubel with my wireless network. I have the strength of the complete signal, but after a while, the speed drops to 78 of the MBP to 5.5 MBP and it remains there (but), and Yes before you sugest, I tried updating my drivers, even uninstall and install drivers, but to no apparent effect.

  That's what I tried:

  -Check to be able to save the settings
  -Uninstall/install drivers
  -Check the wireless settings
  -The router settings. (my laptop is the newest and the only one to lose speed in the House.) Other laptops maintains a constant speed, it is also the only computer with vista installed)

  (PS: wireless cards / wireless snow effect can?)

  Thanks for the help in advance! :)

  Hi mate,

  I think that it s is not easy to say why this happens, but in the properties of your WIRELESS card with (Device Manager), you can choose wireless mode. Set the value to IEEE 802.11 g wireless network card always uses the fastest speed.

  Also check WLAN channel. You can change it in the properties of the router, another value allows perhaps at a faster speed.

  Options for energy-saving wireless network card must be disabled or let's say together for maximum performance. The wireless network card never recorded engine so that it uses the fastest connection.

  In addition, it would be interesting to know which driver you have installed. From the Toshiba site or another page?
  Last but not least, you should try a BIOS update.

• Satellite L500-1WG - wireless on battery problems

  Wireless connections work fine on the main power supply, but often is de-energized when running on battery power.

  I tested this several times and confirmed that this happens during the passage of the main battery.

  BR,
  Magnus

  Hello

  I think that this problem occurs due to the settings in the Windows 7 power management.
  There is an option that allows to power without danger when the laptop is running on battery.

  Change or disable this option for WLan card.
  I think this should help you to solve this annoying problem

  Welcome them

• Satellite C660 2QH WLAN problem--loss of connection all the ~ 30 min

  Hello world

  I just bought a SAT C660 nine Toshiba and I faced a strange problem - I lose the internet connection every 30 minutes for about 3-5 minutes, then it connects all of a sudden again.

  I've been reading about the problem here and I fixed my power settings (although this also occurs when the laptop is plugged in), and I installed the new WLAN driver: 1005.19.0420.2011 (my Wireless LAN Adapter is: 8188CE). I thought that he that could have the problem in my anti-virus program, so I uninstalled. A few restarts later everything was as before - problem persists.

  Help, please!

  PS. I'm from Germany, where this is relevant.

  Hello

  Are you sure this isn't question of Wlan router?
  It would be interesting to know if you have the same problems with other devices connected to the Wlan.

  Next to the idea that this could be a router issue I think you should check some WLan Card settings.
  In the Wlan card-> properties-> tab Device Manager to disable the option to turn off the device to save power.

  You said that you have installed/updated test driver the driver from Realtek page too.