How correct us error 34

Similar Questions

• How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  Hello

  Here is some information on this problem.

  The information contained in the link suggest you delete a scheduled entry, if it exists:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

  You can also use this program (FREE Autoruns) to find:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• How can you correct 0x8dddooo4 error message

  How can you correct 0x8dddooo4 error message

  What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it be detected by it when the system was analyzed last?

  Malware does not reside on the system or you need to read this Microsoft KB article:
  Error that you see in the upper right when you visit the Windows Update Web site on a Windows XP-based computer: "[error number: 0x8DDD0004]."

  All the steps in the above article can be made by downloading, recording, then by running the Fixit of: How to reset the Windows Update components?

  Once the download is complete, close all open programs and web browsers.
  Then, run MicrosoftFixit50202.msi and choose it is the default mode.

  The default mode performs the same steps as shown in the article first, KB914224 and that someone at Microsoft should edit this page so that it refers to the Fixit.

  Please note that if the malware resides on the system, then the components of Windows may updates reset / will fail or just temporarily fix the error code, what malware is.

• How can I correct an error of protection of digital copyright on Windows media player 9 or 11? __

  How can I correct an error of protection of digital copyright on Windows media player 9 or 11?

  Hi felixowl,

  1. when exactly you get the error message?
  2. What is the exact error message?

  If you get this error when trying to read the DVD with Windows Media Player, then follow the steps mentioned in this article and check the result: http://support.microsoft.com/kb/308012

  For more information, see http://support.microsoft.com/kb/925705

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• How can I correct the error that my XML page cannot be displayed?

  When I run the Microsoft Fix it Center each item comes up with the same answer that I can't watch my XML input using XSL style sheet and to correct the error. How can I fix the error?

  Hello

  ·         Who solve this are you referring to and why do you run the hotfix on the system?

  ·         Outside this Web site you are able to view websites without any problems?

  ·         What browser are you using and what version?

  The error means that web browser is unable to display information from a database file (XML) using the rules defined for the display of information (XSL). Rules XSL on the site you access may be unavailable, corrupted, or currently modified and made available later.

  If it is not then your site, I suggest to try after a while and check if you are able to view the Web site. If this is your site then, I suggest you check the code you have created and then try to view the Web site.

  If you use internet explore, then I suggest you to reset Internet explorer and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  I suggest you return the item mentioned below.

  Error message "Cannot display the Page XML" when you open an XML file as an attachment in an e-mail message

  http://support.Microsoft.com/kb/303487

• I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  Hello

  I apologize for the delay in responding.

  This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.

  https://support.Microsoft.com/en-us/KB/958044

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• My LR6 in Windows10 was arrested following a software without correct closure error. When the reopening, LR6 gives the message "your catalog is always opened by another program. Please close this program "." But no other program is open. How early to solv

  My LR6 in Windows10 was arrested following a software without correct closure error. When the reopening, LR6 gives the message "your catalog is always opened by another program. Please close this program "." But no other program is open. How early to solve this problem?

  There is a file with a name ending in. BLOCK in the same folder as your catalog Lightroom.

  Remove this item. LOCK file. Do not remove anything else.

• new Windows: error logging 08 x 0070424 how correct this, he repeats it failed?

  08 x 0070424 how correct this, it keeps saying that it has failed?

  I can't turn on my firewall either, how can I solve this?

  Hello

  It helps if you tell us what operating system you are using and what is your Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista (any other information is for XP and Windows 7)

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• How to fix error 30?

  How to fix error 30?
  I can print online from IE but don't want to.
  Thank you

  Hello

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• I can't move the icons on my desktop by dragging them (I use to be able to) how correct them where I can move them again (I can't delete is)?

  I can't move the icons on my desktop by dragging them (I use to be able to) how correct them where I can move them again (I can't delete them either?)

  Hello

  Thanks for posting this question in the Microsoft Community.

  If I understand correctly, you are not able to drag icons on the desktop. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3. what happens when you try to remove the icons?

  4. do you get an error message?

  5. are you aware of any changes made to the computer before the show?

  Run a full scan using the Microsoft Safety Scanner and check for infections.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  If the problem persists, start the computer in safe mode and perform a clean boot. Clean boot helps eliminate software conflicts.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• May a member of the staff to correct my error loading?

  I ve spent two days working on an animation. Now I have error message when you try to open the file, something java script.

  I read in another post on how to fix you by the code search in the firefox browser. I didn t understand a word of it and would be very happy if someone could correct the error if I send his project.

  Could someone help me with this?

  Simply use a text editor such as notepad ++ or media.

  Here is the file:

  Dropbox - EVEREST EDGE CORRECTED.zip

  Please mark as correct in case anyone has the same problem. Facilitates the search for users.

• How to solve error HRESULT: 0 * 8007054f?

  How to solve error HRESULT: 0 * 8007054f?

  On which Mac or your mobile device, with which operating system?

• "VI a error 1002288.The full version of LabVIEW Development is necessary to correct the errors."

  Hello

  I had created an executable in LabVIEW 8.6 on a PC windows XP 32-bit. The application uses some screws of Vision. The executable is running in most of the PC except one. the PC is a windows 7 64 bit. I first got the error "Labview support 3 error code: could not load front". "" I fixed this by changing the settings of the source file in the application builder. Now I get the error message "VI a error 1002288.The full version of LabVIEW Development is necessary to correct the errors"and the exe displays a run button broken.»

  But if I build the exe in the same PC I get no error and it works very well. Moreover, I tested this exe in another PC with the same configuration, it works. I tried to reinstall labview in the PC, the problem persists.

  Hi Nitrox,

  There is no official adapter for LabVIEW 8.6 in Windows 7. See link below.

  www.ni.com/LabVIEW/OS-support/

  Upgrade to SP1 LV2009 should solve your problem. We had this problem with another client and update SP1 LV2009 solved his problem and should solve your problem too. If you have a problem after the update let me know.

  Kind regards

  Christophe P

  Technical sales engineer

  National Instruments